Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Refactors the apds9960 sensor driver to get the i2c device name, i2c
device address, gpio device name, and gpio pin from a constant device
configuration structure, rather than using hardcoded macros. This will
make it easier to change the names of the macros and to instantiate
multiple instances of the driver.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Updated to add support for CS. DT config names updated
to adhere to the DTS naming convention. Init and SPI
configuration now follows the device datasheet.
Signed-off-by: Henrik Malvik Halvorsen <henrik.halvorsen@nordicsemi.no>
The existing device_set_power_state() API works only in synchronous
mode and this is not desirable for devices(ex: Gyro) which take
longer time (few 100 mSec) to suspend/resume.
To support async mode, a new callback argument is added to the API.
The device drivers can asynchronously suspend/resume and call the
callback function upon completion of the async request.
This commit adds the missing callback parameter to all the drivers
to make it compliant with the new API.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Maybe this is some "just in case" thing that got copied around. There's
no need to have a blank line at the beginning or end of Kconfig files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
1. Remove nrf_common.h include
2. Remove unnecessary NRF_*Type defines, using
CMSIS NRF_TEMP define directly instead.
3. Align driver code by including DEVICE_DECLARE,
and moving DEVICE_AND_API_INIT() to the bottom.
Signed-off-by: Gaute Gamnes <gaute.gamnes@nordicsemi.no>
In zephyr drivers should always use u32_t.
Using uint32_t here generates issues in the CI when NEWLIB_LIBC
is defined.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Most of these are from 'source'ing drivers/sensor/grove/Kconfig within
an 'if SENSOR' (in drivers/sensor/Kconfig), and then adding another 'if
SENSOR' within it.
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
vl53l0x driver is using an external library to build, located under:
ext/hal/st/lib/sensor/vl53l0x.
This library is expecting stdint.h lib to be available and to
secure this for driver library inclusion work, a stdint.h file
header check was done. This check was based on assumptions on possible
header names for stdint.h.
Due to recent renaming of the zephyr header files, this check was
returning a false positive, generating warning at compilation.
Rather than updated with new header names, remove this check, since
driver porting is completed and stdint.h inclusion is actually
done.
Fixes#10134
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Generate interrupt on every ALS cycle in non-trigger mode
and enable ALS saturation interrupt.
resolves: #11989
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Add support to STM LIS2DW12 3-axis accelerometer driver.
The driver support I2C and SPI bus communication and both
polling and drdy trigger mode.
Co-authored-by: Mario Tesi <mario.tesi@st.com>
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use the new i2c_write_read() wrapper to simplify the code.
Also add several overlays used to test the sensor on a variety of
boards, and conf file support for trigger testing.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Use auto-generated device tree macros in LPS25HB driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LSM6DS0 driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
We use DT to get the I2C address, so the define that got it from a
Kconfig sybmol isn't used and the Kconfig symbol isnt defined. Remove
this dead code.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We get the following warning with sdk-ng:
drivers/sensor/lis2dh/lis2dh.c:210:38: error: bitwise comparison
always evaluates to false [-Werror=tautological-compare]
if ((value & LIS2DH_LP_EN_BIT_MASK) == 1 && ...
^~
The test needs to be:
(value & LIS2DH_LP_EN_BIT_MASK) == LIS2DH_LP_EN_BIT_MASK
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This belongs in the implementation file that references the array, since
the header is included in multiple files.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Setting bit 3 instead of bit 2 modifies a reserved section of the
register, with the impact that the ODR is not as configured.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Use auto-generated device tree macros in LIS3MDL driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LIS2MDL driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LSM6DSL driver to avoid
usage of dts.fixup code for it.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use Kconfig named choice for TRIGGER_MODE in order to easy
up the trigger mode selection in default configurations
for boards using this sensor driver.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Share lis2dh driver among few accelerometer sensors that has
same register interface: LIS2DH, LIS3DH, LSM303DLHC, LIS2DH12,
LSM303AGR.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Use auto-generated device tree macros in LIS2DH driver to avoid
usage of dts.fixup files. The triggered interrupt part has been
slightly hacked to automatically understand whether only int1 is
configured or both int1 and int2.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add support to STM LIS2DS12 3-axis accelerometer driver.
The driver support I2C and SPI bus communication and both
polling and drdy trigger mode.
Currently it uses high resolution only as power mode.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Add a configuration structure to sht3xd that holds instance-specific
parameters, implemented in a immutable statically allocated object
initialized with material from device tree binding aliases.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
