The NXP SDK defines CodeQuickAccess and DataQuickAccess sections
for locating critical items that need faster access. Centralize
the handling of these sections instead of doing it per SOC.
Fixes#44453
Signed-off-by: David Leach <david.leach@nxp.com>
- update stm32l4 to cube version V1.17.1
- update stm32wb to cube version V1.13.2 (including hci lib)
- update stm32f4 to cube version V1.27.0
- update stm32u5 to cube version V1.1.0
- update stm32g4 to cube version V1.5.0
- update stm32h7 to cube version V1.10.0
- update stm32f7 to cube version V1.16.2
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Initial addition of the LC3 codec as a module. Usage of the module
will be seperate commits.
Even though this codec is a generic audio codec, it is tagged with
Bluetooth: as it can only be used for LE-Audio. Using the codec for
other purposes is a violation of the granted rights for the codec.
Signed-off-by: Casper Bonde <casper_bonde@bose.com>
Synch up to upstream
https://github.com/mcu-tools/mcuboot/commit/aa041a282d
- Added workflow verifying integration with the Zephyr
- removed deprecated DT_CHOSEN_ZEPHYR_FLASH_CONTROLLER_LABEL
- Fixed usage of CONFIG_LOG_IMMEDIATE
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Pin control DTSI files need /omit-if-no-ref/ property to reduce
generated devicetree size and improve build times.
Fixes#44262
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
PR #43575 was merged mistakenly with a reference to a PR. Fix this by
pointing to the HEAD SHA of the TF-M fork.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update trusted-firmware-m to include GPIO service fix.
This would otherwise result in an assert or GPIO pins not assigned
to the network.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
EDTT branch was updated with loads of ISO stuff as well as misc. minor
fixes. Also EDTT branch default is now 'main'
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Synch up to the upstream:
mcu-tools/mcuboot@4c0f6c177f
Update to the 1.9.0
- boot: Allow larger minimum flash write
- boot_serial: zephyr: Add optional timeout to enter serial recovery
- boot_serial: Adapted to Zephyr's new CRC APIs
- zephyr: Use a smaller sha256 implementation
- boot_serial: Added support for the echo command
- single loader: fixed image decryption for any SoC flash
of the pages size which not fitted in 1024 B
Plus a few fixes
- serial recovery: fixed echo command
- serial recovery: fixed possible output buffer overflow
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This updates hal_espressif so that a few changes and
features are available in main repository.
- Removed unused stubs
- Updated esptool version
- Fix macro redefinitions
- Changes to support Zephyr SDK toolchain
- pinctrl base files
- Fix BLE nested locking handling
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
NXP hal will define constants for pinmux options in RT pinctrl
implementation. Update hal revision to pull in dtsi file.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
In upstream the LV_COLOR_DEPTH_BITS option is called LV_COLOR_DEPTH, this
needs changing if we want to support v8.2.0.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
NXP hal pinctrl header files are required for pin groups. Update HAL
revision to pull in pinctrl header files.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit moves openthread CMakeLists.txt from openthread submodule
to zephyr/modules/openthread.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
Fixes: #40559
Moving CMakeLists.txt gluecode into Zephyr repo minimizes the patching
needed in LittleFS repo.
It provides a dedicate Zephyr LFS config header which will define the
equivalent LittleFS settings based upon Kconfig settings.
This further reduces the patching needed in LittleFS.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Pull latest canopennode module version. The last revision changes module
name from CANopenNode to canopennode.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This updates the lvgl in-tree glue code to work with version v8.1.0 and
bumps the west manifest accordingly.
The following are the most significant changes:
- The logging callback has changes in lvgl and no longer provides the
caller with an integer log level code. We now need to parse the log
string's prefix to determine the level.
- Several Kconfig options (mostly for default values of various settings)
have been removed because these values are no longer configurable in
lvgl.
- The library no longer performs a deep copy of the display and input
device driver structs, so these must no longer be allocated on the
stack in the init func.
Other than that it's mostly about renaming of various structures and
functions and adjusting the calls if function's signatures have changed.
This patch allows all in-tree users to work correctly but it's likely
it doesn't support all new widgets and layouts added in lvgl v8. These
however can be added gradually once this is upstream.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@huawei.com>
Parameter `prio` of `nrf_802154_irq_init` is now allowed to have
negative value what means use of ZLI priority or highest possible
priority if ZLIs are disabled.
Signed-off-by: Andrzej Kuros <andrzej.kuros@nordicsemi.no>
Update west.yaml to the commit consist of the new config option
CONFIG_FATFS_WINDOW_ALIGNMENT to align the win variable with
specific alignment
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Fixes:
- boot_serial: Adapted to Zephyr's new CRC APIs
- zephyr/boot_serial_extension: us BOOT_LOG instead of LOG_
fixes#42690
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Point to the commit fixing the issue that prevents
to establish ble connection on stm32wb
Fixes#42367
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This update updates the TraceRecorder module from version v4.5.2
to v4.6.0(RC1). The primary motivation for this update is to
fix some breaking trace hook changes introduced into Zephyr
v2.7.99, which resulted in compilation errors when using the
TraceRecorder module.
The update to v4.6.0 also introduce Snapshot tracing support,
extended kernel object naming, and a reworked configuration
scheme with better naming and layout in guiconfig.
Signed-off-by: Torbjörn Leksell <torbjorn.leksell@percepio.com>
Add handling of secure-only code with TF-M enabled that can only be done
from secure processing environment.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
STM32Cube LL API for EXTI was buggy and returned
the wrong gpio port as IRQ source.
Point to the fixed version.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update edtt sha to 1fc2e6f7d2a01a01074456f2ef2ccf1f3df7fac1
>> Fix Database Hash value after GATT fix
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Current uart driver implementation is incompleted regarding the
usage of DT_INST_FOREACH_STATUS_OKAY. If uart0 and uart2 are selected,
build breaks due to peripheral number ordering, which would be
0 and 1 in this case. This fix PR fix this by re-working the macros
and setting proper uart peripheral instances in DTSI, required for signal
routing configuration.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Accidentally merged a PR before the manifest was updated. This
fixes the NXP HAL reference to the proper SHA.
Signed-off-by: David Leach <david.leach@nxp.com>
