For now clock can be read and written.
Clock can be set in full iso8601 time format, like 2023-12-24T12:45:56
or by just providing either data or time
Alarms not accessible
Signed-off-by: Kim Bøndergaard <kim.bondergaard@prevas.dk>
The file kconfig.py was originally introduced by myself in:
https://github.com/zephyrproject-rtos/zephyr/pull/5569
The file was a modified version of a Kconfiglib one, so it makes sense
to keep the original license (ISC).
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Will exclude the code for prefix and checksum functionality if none
of the entries on a device make use of these features, saves ~816
bytes when both features are excluded.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
It mirrors the functionality of the vl53l0x driver.
Also removes an assert not needed, as the channel is checked.
Signed-off-by: Daniel Stuart <daniel.stuart14@gmail.com>
Convert the nrf52_bsim board, to use the native simulator
as its engine.
This means some of the functionality the board included
before is now handled by the native simulator, including
the overall program main and CPU/HW scheduling.
Note that this board remains separate from the native_sim
board, even if both use the native simulator.
Also update the nRF HW models component to a new version
which has been converted into an extension for the
native simulator.
After this change, it becames also possible to build
the nrf52_bsim with an embedded C library, and to
use with it the Zephyr POSIX API shim.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
To allow reusing the path between boards,
instead of defining it in the board, let's define it in
the arch cmake file.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
CONFIG_COVERAGE has been incorrectly used to
change other kconfig options (stack sizes, etc)
code defaults, as well as some samples behaviour,
which should not have dependend on it.
Instead those should have depended on COVERAGE_GCOV,
which, being the one which adds special code and
temporary RAM storage for embedded targets,
require changes to many features.
When building for the native targets, all this was
unnecessary.
=> Fix the dependency.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
CONFIG_NOCACHE_MEMORY is a valid way of declaring buffers in
nocache regions. Consider them valid in the stm32 SPI driver
nocache check. Also, don't check NULL buffers as the SPI
interface states that such buffers will result in sending
zeroes.
Signed-off-by: Daniel Gaston Ochoa <dgastonochoa@gmail.com>
Increase the default init priority of nct38xx so that they work well
with the default I2C init priority (50).
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
To ease migration of out-of-tree code, re-introduce previous CMSIS
headers that when include generate a warning informing about the
replacement header.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The CMSIS module glue code was part of arch/ directory. Move it to
modules/cmsis, and provide a single entry point for it: cmsis_core.h.
This entry header will include the right CMSIS header (M or A/R).
To make this change possible, CMSIS module Kconfig/CMake are declared as
external, allowing us to add a new Zephyr include directory.
All files including CMSIS have been updated.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move CMSIS module Kconfig options to a folder, in preparation for CMSIS
core header creation.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
MCUmgr client upload max data payload length was missing
Transport layer CRC + 16bit lenght. Full net buf packet was
possible to send but receiver side it was blocked because there
was not space for calculate CRC and length.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Make J-Link the default runner on this board, keeping Lauterbach TRACE32
runner as an alternative.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Force default stdout encoding to utf-8 as otherwise ram_report/rom_report
may fail to render (ex. in CLion IDE built-in terminal).
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add platform filtering when generating tests for manifest modules.
In the clang workflow, we do select to run only on one platform, so this
needs to be applied as well or we end up building unwanted tests using
the wrong toolchain.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This CL introduces new Flash Interface Unit (FIU) hardware in npcx4
series. The different operations of npcx9 and npcx4 FIU include:
1. 4-byte mode support for DRA mode move to SPI_DEV reg
2. To access the second flash in DRA mode, we need to configure
SPI_DEV_SEL field in BURST_CFG additionally.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
This CL introduces new clock architectures in npcx4 series and wraps
clock configurations of different series by device tree files.
For example, the PWDWN_CTLx reg initialization relies on `pwdwn-ctl-val`
prop of pcc DT node now.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
This CL adds the soc drivers for npcx4 series. Besides adding npcx4m3f
and npcx4m8f support, we also modified the register offset of
LV_GPIO_CTL and PUPD_EN for npcx4 series.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Refactor image_config.cmake so that it is no longer sourced
unconditionally for all images. Instead image_config.cmake has been
split into BOOTLOADER_image_default.cmake and MAIN_image_default.cmake
and is set as property on the image.
This means the code in image_config.cmake can be split into dedicated
files which depends on the image type. Furthermore it allows sysbuild
modules to append extra config snippets to process for sysbuild kconfig
overwrite, or even remove the default snippet and have full control.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
When west is used by Zephyr, then minimum required version is 0.14.0.
Therefore cleanup west.cmake by removing code which are created to
support west versions =< 0.7.x.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Retry sending notification was not sent due to e.g. lack of
buffers currently available.
Fixes: #57456
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Retry sending notification was not sent due to e.g.
lack of buffers currently available.
Fixes: #57452
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Add a board revision D for the s32z270dc2_r52 boards and make the
existing revision B the default. The main difference between these
revisions affecting current Zephyr port is the USB/UART port that
was moved from LINFlexD instance 0 to 9.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
/delete-node/ pointing at node labels needs to be out of the the tree
hierarchy, fixes the error:
devicetree error: zephyr/dts/arm/nordic/nrf52840_qfaa.dtsi:24 (column
16): parse error: expected node name
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
