Replaces the previous approach to define bands via hardware capabilities
by the standard conforming concept of channel pages.
In the short term this allows us to correctly calculate the PHY specific
symbol rate and several parameters that directly depend from the symbol
rate and were previously not being correctly calculated for some of the
drivers whose channel pages could not be represented previously:
* We now support sub-nanosecond precision symbol rates for UWB. Rounding
errors are being minimized by switching from a divide-then-multiply
approach to a multiply-then-divide approach.
* UWB HRP: symbol rate depends on channel page specific preamble symbol
rate which again requires the pulse repetition value to be known
* Several MAC timings are being corrected based on the now correctly
calculated symbol rates, namely aTurnaroundTime, aUnitBackoffPeriod,
aBaseSuperframeDuration.
In the long term, this change unlocks such highly promising functional
areas as UWB ranging and SUN-PHY channel hopping in the SubG area (plus
of course any other PHY specific feature).
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Switch the driver to the soft CSMA/CA algorithm as an intermediate
compromise for improved standard compliance (namely expontential
backoff) until true hardware support can be implemented by chaining
radio commands.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The CC13xx/CC26xx Sub-GHz driver announces a hardware CSMA/CA capability
which it provides only partially. This change documents the gap.
The change also fixes two related issues with the current CCA
implementation:
- The given default ED threshold was above the allowed threshold
defined in the specification.
- The CCA timeout was not calculated according to the requirements
defined in the standard.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
Added new CC1352P1 LaunchXL board supporting 20dBm TX for its
sub-GHz radio.
Note that the board has a multiplexer circuit to switch between
2.4GHz, High-Power TX and Sub1GHz states, for which a custom board
module was implemented, together with board-specific device-tree
bindings and pinctrl definitions for each of the RF states.
Signed-off-by: Stancu Florin <niflostancu@gmail.com>
Add CONFIG_CRC for building CRC related routines.
CRC routines are now being built for each application, whether used or
not and are add in the build system unconditionally.
Keep CONFIG_CRC enabled by default for now and until all users have
converted to use the new option.
Partial fix for #50654
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make all drivers default to 'y' and dependent on being enabled in DT.
This will allow simplifying many samples/tests.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the radio and IEEE 802.15.4. This allows to
remove usage of IEEE802154_CC13XX_CC26XX_SUBG_DRV_NAME in preparation
for the removal of NET_CONFIG_IEEE802154_DEV_NAME.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Use Devicetree to describe the radio and IEEE 802.15.4. This allows to
remove usage of IEEE802154_CC13XX_CC26XX_DRV_NAME in preparation for the
removal of NET_CONFIG_IEEE802154_DEV_NAME. All boards used in testing
have been updated to enable the peripheral in DT as well.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This change adds IEEE802154_RAW_MODE support for the
cc1352r.
This allows using the cc1352r 2.4 GHz radio and Sub Ghz
radio as a transceiver (PHY) instead of using L2 networking.
Signed-off-by: Erik Larson <erik@statropy.com>
This change adds IEEE 802.15.4g (Sub GHz) support for the
cc1352r.
The 2.4 GHz radio and the Sub GHz radio are capable of
operating simultaneously.
Fixes#26315
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
This change reworks the cc13xx_cc26xx IEEE 802.15.4 driver to use
the TI RF driver API that is available in modules/hal/ti.
There are a number of benefits to using TI's API including
- a stable multi-OS vendor library and API
- API compatibility with the rest of the SimpleLink SDK and SoC family
- potential multi-protocol & multi-client radio operation
(e.g. both 15.4 and BLE)
- coexistence support with other chipsets via gpio
- vetted TI RF driver resources, such as
- the radio command queue
- highly tuned / coupled RTC & RAT (RAdio Timer) API
Fixes#26312
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
