Add device driver for TI TMP114 I2C temperature sensor.
The driver only support basic functionality, i.e. fetch temperature
using default values.
Datasheet:
https://www.ti.com/lit/ds/symlink/tmp114.pdf
Signed-off-by: Fredrik Gihl <fgihl@hotmail.com>
When in the BAP unicast server role, at least PAC sink
or PAC source shall be set.
In order to fulfill this new requirement, a few other Kconfig
options had to be changed to a `depends on` from `select` to
avoid recursive Kconfig requirements. This change may require
some applications to update their configurations according
to the migration guide.
The change from `select` to `depends on` is ideal anyhow
as that is the recommended way to add dependencies.
This can checked via the combined BT_PACS Kconfig value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Delete tests that did not end up bringing any value.
What ended up happening is busy-work to "make the test pass" without
understanding what's their original purpose.
Worse, the CI change-based testing is broken and doesn't pick them up,
even by PRs modifying the tests themeselves.
See #68008
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Disable the quadspi mpu region of the nucleo_f756zg (like done on
nucleo_f746zg) when testing the samples/userspace/shared_mem
or tests/kernel/mem_protect/userspace
The stm32f7 cortex M7 has 8 MPU regions and the one for quadspi prevents
the testcase to PASS.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Tests for HTTP server support.
Signed-off-by: Emna Rekik <emna.rekik007@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When building ISO applications on a device that has the host
and controller on the same core, the application developer
shouldn't have to set controller specific configurations.
Without this change the samples iso_receive and iso_broadcast
will fail to run on NRF52 series devices as the samples
try to set up two streams but the controller is configured
to support only one.
Controller unit tests that were previously only enabling the
controller specific ISO configurations now also enable the
top-level ISO configurations to ensure that the default
stream count is properly configured.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
This testsuite requires an external I2C RAM connected to the I2C bus.
Adding details to provide guidance to users interested in running the
suite.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
The function writes random data to the provided buffer. Maximum
permitted buffer size is 256 bytes. On success the function returns 0,
otherwise it returns -1 and sets errno to appropriate value.
Signed-off-by: Patryk Duda <patrykd@google.com>
Add USB out support for the BAP shell, so that decoded LC3
data can be sent to the host (e.g. a PC).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add tests to ensure that the aio.h header exists, the
structures are declared, and that the functions are present.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Test that the Host give back the correct error when we try to set too
big advertising data. And ensure that long advertising data are
correctly transmitted.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
In most cases these were defined as 1. Saving one byte for the rest
doesn't really justify the added complexity that comes with these
options. Removing them also simplifies the interface between HCI
transports/drivers and the host stack, which in turn helps pave the way
for having HCI as a proper Zephyr driver API.
Fixes#71907
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Commit adds using host\controller based random number
generator instead of zephyr driver.
No mesh dependency anymore on zephyr system
random driver.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
We can (and do) open multiple channels with a single L2CAP command. If the
remote doesn't support dynamic channels at all, then it sends back a
REJECT_RSP.
We only destroyed the first channel that matched the command PDU
identifier. Fix that and remove all channels that match.
Also add a test that verifies the patch.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Implement `DT_INST_NODE_HAS_COMPAT` to check if a node has a
compatible. This is helpful when a node has more than one
compatible, which can be used to enable additional features
in the driver.
Updated the devicetree test to play with the new API.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Commit adds optimization of blob and dfu models bsim tests.
1. Makes general transfer size and block size smaller for blob.
2. Makes waiting time shorter for some blob bsim tests.
3. Splits long dfu srv persistence test suite into two.
4. Reduces retransmission for unicast messages till zero
for blob and dfu tests.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
This reverts commit 9b43fed10a.
This PR introduced 2 regressions in main CI:
71977 & 71978
Let's revert it by now to get main's CI passing again.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This reverts commit 3ef282be6c.
This PR introduced 2 regressions in main CI:
71977 & 71978
Let's revert it by now to get main's CI passing again.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This reverts commit 9f4d9989c6.
This PR introduced 2 regressions in main CI:
71977 & 71978
Let's revert it by now to get main's CI passing again.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
With the deprecation of `BT_LE_ADV_OPT_USE_NAME` and
`BT_LE_ADV_OPT_FORCE_NAME_IN_AD` the tester has been updated to not use
the macro adding the device name in the advertising/scan response data
anymore. Instead the name was explicitly added to the scan response
data. But because that part of the tester was using an extended
advertiser and was already adding data in the AD, the name should have
been put in the advertising data and not the scan response data.
The same issue apply to both `btp_cap.c` and `btp_bap_broadcast.c`,
update them to add the device name in the advertising data.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
This property will ensure that PWM driver allocates data buffer
in appropriate location.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
There's a easily-tripped-upon free memory write condition in the arch
layers where they will write to a cached _current pointer after that
thread has been aborted. Detect this by clobbering the thread data
after the return from k_thread_abort() and validating that it's still
clear after the ISR returns.
Note that the clobbering of the thread struct requires the removal of
a k_thread_join() that (obviously) requires that it see a DEAD flag
set. Joining aborted threads isn't actually legal, but does still
work as long as app code doesn't reuse the memory. Basically we can't
test both cases here, and we have join coverage elsewhere already.
Signed-off-by: Andy Ross <andyross@google.com>
A scheduler fix for free memory usage on aborted threads is now using
a per-CPU dummy thread instead of a single stack-based one at startup.
These static thread objects need spots in the kobj bitmasks, and a few
tests are sitting right at the default limit (16 threads).
Signed-off-by: Andy Ross <andyross@google.com>
There might be a deviation of 30.5 microseconds (1 cycle) due to the
calculation deviation between free run and event timers. This commit
increases stdev to 33 for ite platform.
Fix#67833
Signed-off-by: Ren Chen <Ren.Chen@ite.com.tw>
We were missing a helper function that can be used to check
whether the given function is the virtual VLAN interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This commit refactors the Intel SSP DAI driver to support dynamic
management of SSP IP. This change additionally separates the management
of the DAI part from the management part of the SSP IP.
Key changes:
- Add new static functions to manage SSP IP power.
- Update the DAI SSP configuration functions to use the new management
approach.
- Update device tree bindings and instances to reflect the new SSP IP
management mechanism.
Signed-off-by: Damian Nikodem <damian.nikodem@intel.com>
This test is disabled upstream for a while and only run on zephyr
toolchains. Logging is missing the support needed for userspace, see
releated issue.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is a kernel tickless test, we should not able PM here. PM should be
tested in own environment only or we get unexecpted behavior.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Tickless kernel is default and has been for some time. This test is
actually testing PM and without proper setup it is doomed to fail on
various platforms where PM needs special considerations and hooks.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
