As the common.h is only meant to be used by the network
shell files, rename it to be more descriptive in order to
avoid possible conflicts with any other common.h file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Calling the registered receive callback when releasing TCP context
doesn't make sense, as at that point the application should've already
closed the associated socket (that's one of the conditions for the
context to be released). Therefore, remove the pointless receive
callback call, while keeping the loop to unref any leftover data packets
(although again, I don' think there should be any packets left at that
point, as they're all consumed in tcp_in()).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
While improving thread safety of the TCP stack I've introduced a
possible deadlock scenario, when calling tcp_conn_close() in tcp_in().
This function shall not be called with connection mutex locked, as it
calls registered recv callback internally, which could lead to deadlock
between TCP/socket mutexes.
This commit moves the tcp_conn_close() back where it was originally
called. I've verified that the thread safety is still solid with the
test apps used originally.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add empty macro for net_if_mon functions if they are not otherwise
defined, like the other functions in the net_if.c file have.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Add new functions to the public CoAP API to configure CoAP packet
retransmission settings. Application may need to re-configure the
settings for example when cellular modem changes connection from
LTE-M to NB-IoT or vice versa.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
The number of Kconfig options for the TCP stack grew considerably,
therefore it makes sense to move them to a separate file not to bloat
the Kconfig file with generic networking options.
Take this opportunity to reorder TCP options, so that protocol
parameters (timings/buffer sizes) are not mixed up with optional
protocol features (fast retransmit/congestion avoidance etc.).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When a TCP connection is established, if there is no data exchange
between the two parties within the set time, the side that enables
TCP Keep-alive will send a TCP probe packet with the same sequence
number as the previous TCP packet. This TCP probe packet is an empty
ACK packet (the specification recommends that it should not contain
any data, but can also contain 1 nonsense byte, such as 0x00.). If
there is no response from the other side after several consecutive
probe packets are sent, it is determined that the tcp connection has
failed, and the connection is closed.
The keep-alive default parameters are aligned with Linux defaults.
Signed-off-by: Horse Ma <mawei@coltsmart.com>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If observed resource was written during the pMin period, it did
not schedule any wake-up event into the future. Notify message would
then only be generated as a result of any other (like Update) event.
Refactor check_notifications() to follow same pattern as retransmit_req().
Return the next event timestamp, which could be now.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
SNTP response is not analyzed for uncertainty, and no uncertainty is given
to the `struct sntp_time` returned. Fix it with a Kconfig option that adds
optional SNTP uncertainty and timestamp fields in SNTP time struct, and
calculates these when parsing the response.
Adds two helper functions to convert Q16.16/Q32.32 in seconds to `int64_t`
in microseconds to facilitate this.
Also changes combined `lvm` field in `struct sntp_pkt` to bit-fields
`li`, `vn`, and `mode`.
Signed-off-by: Jasper Smit <git@jrhrsmit.nl>
Add const prefix for service uuid and char uuid.
Since Service UUID and Char UUID should not change in the service
definition, they are most reasonably defined as rodata, also for
save some ram footprint.
The field `attr->user_data` type is `void *`, as this PR change
all Service UUID to rodata, so there must add (void *) to avoid warning.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Add Kconfig choice for the user to select how Network Events are
handled. It's own thread, the system work queue or synchronous when
events are emitted.
By default a separate thread is created to be backwards compatible.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This reverts commit 5227f24815.
The coap observer events will be replaced with net_mgmt events.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
A device can be reset before the error code list is communicated
to a LwM2M server so optionally store error list in settings so it
can restored after reset.
Signed-off-by: Nick Ward <nix.ward@gmail.com>
Iterating over connection list w/o mutex lock could lead to a crash on
constant incoming packet flow. Fix this by:
1. Adding mutex lock when iterating over an active connection list, to
prevent list corruption.
2. Create a copy of the callback and user data pointers before releasing
lock, to prevent NULL pointer dereference in case connection is
released before callback is executed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Eliminate race between TCP input thread and TCP work queue, when
dereferencing connection. This normally would not manifest itself during
standard TCP operation, but could be a potential opening for abuse, when
the already closed TCP connection is kept being spammed with packets.
The test scenario involved sending multiple TCP RST packets as a
response to establishing the connection, which could result in system
crash. The following changes in the TCP stack made it stable in such
scenario:
1. Use `tcp_lock` when searching for active connections, to avoid
potential data corruption when connection is being removed when
iterating.
2. Avoid memset() during connection dereference, not to destroy mutex
associated with the connection. The connection context is only
cleared during allocation now.
3. Lock the connection mutex while releasing connection.
4. In tcp_in(), after locking the mutex, verify the connection state,
and quit early if the connection has already been dereferenced.
5. When closing connection from the TCP stack as a result of RST or
malformed packet, verify connection state to make sure it's only done
once, even if multiple RST packets were received.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Silently drop the IPv6 Neighbor Advertisement if we receive it
for an unknown neighbor or if there some some issue in the packet.
Returning error here would cause the ICMP module to print an
actual error which just pollutes the log without any apparent
benefit.
Fixes#66063
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If server registration fails, allow fallback to secondary server,
or fallback to bootstrap.
Also allow fallback to different bootstrap server.
Add API to tell RD client when server have been disabled by
executable command.
Changes to RD state machine:
* All retry logic should be handled in NETWORK_ERROR state.
* New state SERVER_DISABLED.
* Internally disable servers that reject registration
* Temporary disable server on network error.
* Clean up all "disable timers" on start.
* Select server first, then find security object for it.
* State functions return void, error handling is done using states.
* DISCONNECT event will only come when client is requested to stop.
* NETWORK_ERROR will stop engine. This is generic error for all kinds
of registration or network failures.
* BOOTSTRAP_REG_FAILURE also stops engine. This is fatal, and we cannot
recover.
Refactoring:
* Server selection logic is inside server object.
* sm_handle_timeout_state() does not require msg parameter. Unused.
* When bootstrap fail, we should NOT back off to registration.
This is a fatal error, and it stops the engine and informs application.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
React to disable executable, as well as add callback that allows
disabling server for a period of time.
Also add API that would find a next server candidate based on the
priority and server being not-disabled.
Move all server related functions into its own header.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Zephyr has its own multicast join/leave API but for
interoperability, it is possible to use the multicast
socket API and IPV6_ADD_MEMBERSHIP and IPV6_DROP_MEMBERSHIP
socket options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Zephyr has its own multicast join/leave API but for
interoperability, it is possible to use the multicast
socket API and IP_ADD_MEMBERSHIP and IP_DROP_MEMBERSHIP
socket options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We are creating a multicast address in mDNS or LLMNR
responder so set the TTL or hoplimit using the multicast
variant API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We specifically set TTL/hoplimit to 1 for LLMNR,
but only want to set it if in that specific case.
We must not pass TTL/hoplimit value 0 as that would
cause the packet to be dropped.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
* Check IPv4 TTL or IPv6 hop limit and drop the packet if
the value is 0
* Check the IP addresses so that we do the loopback check
at runtime if the packet is destined to loopback interface.
* Update the statistics properly for dropped packets.
* Do not update sent packets if we drop packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The IPv4 TTL could only manipulated via net_context interface.
It makes sense to allow the same from socket interface via
the setsockopt/getsockopt calls.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The net_if_ipv6_set_hop_limit() API was missing the "_if_"
part in it. Fix this so that the network interface API is
consistent. The old function is deprecated and should not
be used. The old function is left to the code and it calls
the new properly named function.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This was somehow missed, but since ICMP rework, message handlers should
not dereference the packet, as it's done by the ICMP lib.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Commit 55802e5e86 fixed error handling of
TX errors, in case ARP request was generated. There are however also
other places where post-ARP cleanup should be done on the TX path (like
running out of buffers for Ethernet L2 header allocation).
This commit fixes those cases in ethernet_send(), where function would
exit early and report error after ARP prepare stage.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Long arguments are handy for new users. Also use hyphen's rather than
underscore to follow the convention.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Newly added security types are missing from the help. Also, now that we
have two variants of PSK, use the prefix to disambiguate.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
When interface names are enabled, a default name is applied
after initialization. Unintuitively, this overwrites any name that is
set during the net_if init.
This change sets a default name first, and then allows net_if
init to overwrite that default name if it chooses to.
Signed-off-by: Noah Luskey <noah@silvertree.io>
Signed-off-by: Noah Luskey <LuskeyNoah@gmail.com>
While printing SSID in wifi status command, If the
length is maximum(32 character). It leads to buffer
overflow. It required one character for null
terminator ‘\0’. Changing the Format Specifiers to
print proper SSID.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
This fix addresses wrong announce message length warning message.
TLV is a variable length (4+8N) based on the 802.1AS-2011 (table 10-8). In
Zephyr TLV is fixed to 12 bytes. TLV type and length are already taken
into account in the announcement message length.
Signed-off-by: Mario Paja <mario.paja@zal.aero>
Set the static initialiser socket file descriptor to -1 to make sure
it is invalid before using coap_service_send.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add extra checks that make sure that msg_iov is set
as we cannot receive anything if receive buffers are
not set.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Fix two issues with sending ICMP Echo Reply for requests sent for
multicast address:
* Use the originator IP address instead of multicast when selecting
source address for the reply
* In case no address match is found, drop the packet, instead of
replying with unspecified address.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
