When duplicating a page table, we don't need to copy
the mapping to the kernel l1 page table virtual address.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
We can (and do) open multiple channels with a single L2CAP command. If the
remote doesn't support dynamic channels at all, then it sends back a
REJECT_RSP.
We only destroyed the first channel that matched the command PDU
identifier. Fix that and remove all channels that match.
Also add a test that verifies the patch.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Implement `DT_INST_NODE_HAS_COMPAT` to check if a node has a
compatible. This is helpful when a node has more than one
compatible, which can be used to enable additional features
in the driver.
Updated the devicetree test to play with the new API.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
USB_NATIVE_POSIX dependencies were partially broken for
native_sim as the option was duplicated in the boards
defconfigas.
Let's not define it also in the board Kconfig.defconfig
but instead default it to y in its main definition if
building for either native_posix[//64] or native_sim[//64]
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Instead of having the boards override the default
in their Kconfig.defconfig
let's just default to IMMEDIATE logging mode in the main
definition if we are building for a ARCH POSIX board.
This avoid issues w dependencies being lost if not duplicated
correctly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The EEPROM_SIMULATOR already defaults to 'y' with proper
dependencies in its main definition in drivers/eeprom/Kconfig.
Let's not define it also in the board Kconfig.defconfig
as that causes dependencies to be lost if not duplicated
correctly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The FLASH_SIMULATOR already defaults to 'y' with proper
dependencies in its main definition in drivers/flash/Kconfig.
Let's not define it also in the board Kconfig.defconfig
as that causes dependencies to be lost if not duplicated
correctly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Kconfig for Seeed Grove LCD RGB Backlight was looking.
Make it depend on DT_HAS_SEEED_GROVE_LCD_RGB_ENABLED.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Switch the default MCUBoot FW Update mode from Swap & Scratch
to more preferable Swap & Move for the rest of NXP boards.
Delete the scratch partition. Save RAM & ROM.
Slot 0 has one additional sector, for use with
the swap move algorithm.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
When registering a target device, the driver will check if a slave address
is free in the peripheral. If so, the new slave address gets configured and
enabled.
Signed-off-by: Bram Vlerick <bram.vlerick@openpixelsystems.org>
Move slave initialization to a separate helper function. This helper will
also be needed in the multi target support during unregistration. When
unregistering, the slave needs to be reinitialized if other remaining
targets are still attached.
Signed-off-by: Bram Vlerick <bram.vlerick@openpixelsystems.org>
Add helper functions to find a free target for configuration and find a
target based on the configured slave address. These functions are in
preparation for multi-target mode.
Signed-off-by: Bram Vlerick <bram.vlerick@openpixelsystems.org>
Move target data to dedicated struct. This is in preparation for multi
target support. The target_handle can stay global since this handle is
unique per peripheral and not per slave address.
Signed-off-by: Bram Vlerick <bram.vlerick@openpixelsystems.org>
Found issues when using ## to concatenate tokens in macros where the
resulting symbolic names were including the ## tokens themselves. Using
CONCAT everywhere fixes the issue.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
This reverts commit 3ba4c98a1d.
A repo from microsoft was not available, that lead to ci
actions failing. This hat been fixed, so this workaround
is no longer needed.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Currently the USB configuration of this sample is
selecting POSIX_CLOCK and being built by default with
USB_NATIVE_POSIX. This combination is currently not possible
due to mutually exclusive dependencies (the host C library)
which results in a configuration warning and POSIX_CLOCK being
forced to 'n'.
Let's instead disable POSIX_CLOCK in this sample USB config
overlay, until the USB native driver supports building
with embedded C libraries.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Removing ourselves from maintainers list as we currently don't have
bandwidth to maintain this platform family.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
With the changes made in pull request #68741, RPMsg service is
supported on stm32h747i_disco using the STM32 HSEM IPM driver. For the
sample to work, add device tree overlays to enable the mailbox and set
the shared memory appropriately.
Signed-off-by: Celina Sophie Kalus <hello@celinakalus.de>
1. support the baudrate = 3MHz.
2. add baudrate = 115200 setting when UART source clock = 25/30/48/50 MHz.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
This commit implement the UART asynchronous API mode support.
When the API is used, the UART hardware cooperates with the DMA (MDMA)
module to handle the the data transfer and receiving.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Pytest harness in Twister tries to get custom parameters to
the pytest harnesses. It is required although those do not exist
(e.g. Twister uses devices without hw map). This change checks
if the custom parameters to the pytest harnesses exists.
Fixes#71817
Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>
Instead of chapters, make device runtime power management and
system-managed device power management sections.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
There is a whole section dedicated to power domains. The brief
information in device power management was not adding anything.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Commit adds optimization of blob and dfu models bsim tests.
1. Makes general transfer size and block size smaller for blob.
2. Makes waiting time shorter for some blob bsim tests.
3. Splits long dfu srv persistence test suite into two.
4. Reduces retransmission for unicast messages till zero
for blob and dfu tests.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Commit fixes bug if dfu server failed to deliver
apply response it gets stuck in applying phase.
In this phase it skips all further client attempts
to apply image again.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
