While recent browsers seem to transparently try to use https for
http://www.st.com/... URLs, they are effectively not working anymore, so use
https://www.st.com/... URLs instead.
curl http://www.st.com/en/evaluation-tools/nucleo-g070rb.html -m 5 -v
* Trying 104.89.117.48:80...
* Connected to www.st.com (104.89.117.48) port 80 (#0)
> GET /en/evaluation-tools/nucleo-g070rb.html HTTP/1.1
> Host: www.st.com
> User-Agent: curl/8.1.2
> Accept: */*
>
* Operation timed out after 5002 milliseconds with 0 bytes received
* Closing connection 0
curl: (28) Operation timed out after 5002 milliseconds with 0 bytes
received
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Update all Nucleo shield samples and references to them so that they
use the new zephyr:code-sample extension.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add plli2s node to dts/overlay file for boards that already use I2S.
Remove old I2S Kconfig not used anymore
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
The boards folder uses ~142.8 MB, being the largest in the repository.
This is due mostly to board images, which are in most cases not
optimized for web content. This patch tries to address this problem by
converting all pictures to JPEG (quality 75) and by adjusting its size
up to 750 px (the width of the documentation content). Images that
specified a fixed width in rst files are converted down to that value
instead.
With this patch, folder goes down to ~53.5 MB from 142.8 MB (-~63%).
Note that this patch introduces a new set of binary files to git
history, though (bad).
The process has been automated using this quickly crafted Python script:
```python
from pathlib import Path
import re
import subprocess
def process(doc, image, image_jpeg, size):
subprocess.run(
(
f"convert {image}"
"-background white -alpha remove -alpha off -quality 75"
f"-resize {size}\> {image_jpeg}"
),
shell=True,
check=True,
cwd=doc.parent,
)
if image != image_jpeg:
(doc.parent / image).unlink()
for doc in Path(".").glob("boards/**/*.rst"):
with open(doc) as f:
content = ""
image = None
for line in f:
m = re.match(r"^(\s*)\.\. (image|figure):: (.*)$", line)
if m:
if image:
process(doc, image, image_jpeg, size)
image = Path(m.group(3))
if image.suffix not in (".jpg", ".jpeg", ".png"):
content += line
image = None
continue
image_jpeg = image.parent / (image.stem + ".jpg")
size = 750
content += (
f"{m.group(1)}.. {m.group(2)}:: {image_jpeg}\n"
)
elif image:
m = re.match(r"\s*:height:\s*[0-9]+.*$", line)
if m:
continue
m = re.match(r"\s*:width:\s*([0-9]+).*$", line)
if m:
size = min(int(m.group(1)), size)
continue
content += line
if line == "\n":
process(doc, image, image_jpeg, size)
image = None
else:
content += line
with open(doc, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Devicetree aliases, accel0 and magn0, were recently introduced to enable
sensor sample applications to support multiple sensor drivers of the
same type and thereby reduce the number of driver-specific sensor sample
applications.
This was implemented by adding devicetree nodelabels to accelerometer
and magnetometer sensor nodes, which unfortunately can suffer from
naming conflicts when using shield boards. Fix the problem by appending
the I2C bus address or SPI chip select to the devicetree nodelabel for
sensor nodes on shield boards only. Base boards are left alone to keep
their nodelabels as short as possible.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
We now 'select I2C' and/or SPI bus in Kconfig in the sensor driver
Kconfig's so there is no need to have boards do the following:
config I2C
default y if SENSOR
config SPI
default y if SENSOR
Signed-off-by: Kumar Gala <galak@kernel.org>
Set accel0 alias for all boards with the ISM330DHCX accelerometer
to use by the accel_polling sample.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Set accel0 alias for all boards with the IIS2DLPC accelerometer
to use by the accel_polling sample.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
For boards with an accelerometer, configure the appropriate bus
(I2C or SPI) default to be enabled if the sensor driver class was enabled.
This change makes no need to add a bunch of board-specific configuration
overlays to the application.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Fix spelling errors in assorted .rst files. The errors were found
using a tool called 'codespell'.
Signed-off-by: Aleksandar Markovic <aleksandar.markovic.sa@gmail.com>
Convert ism330dhcx INT_PIN attribute from Kconfigs to Device
Tree binding properties. Here int-pin has been defined as
enum with two possible values: 1 and 2.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The IIS2DLPC drdy interrupt can be routed to either INT1 or
INT2 pin. Currently the selection is done by Kconfig configuration.
This commit is instead moving it into Device Tree as 'drdy-int'.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
x-nucleo-iks02a1 shield is an arduino compatible companion board
which can be used on top of Nucleo standard boards for industrial
applications. It extends the Nucleo functionalities adding following
MEMS sensor support:
- ISM330DHCX 3-axis accelerometer and 3-axis gyroscope
- IIS2MDC 3-axis magnetometer
- IIS2DLPC 3-axis accelerometer
- IMP34DT05 digital microphone.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
