This introduces support for memory mapped thread stacks,
where each thread stack is mapped into virtual memory
address space with two guard pages to catch
under-/over-flowing the stack. This is just on the kernel
side. Additional architecture code is required to fully
support this feature.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the mechanism to do cleanup after k_thread_abort()
is called with the current thread. This is mainly used for
cleaning up things when the thread cannot be running, e.g.,
cleanup the thread stack.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Do not build threading support when CONFIG_MULTITHREADING=n is set and
move needed calls to a new file with the changes needed instead of the
ifdef party in sched.c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When thread stack is defined as an array, K_THREAD_STACK_LEN()
is used to calculate the size for each stack in the array.
However, standalone thread stack has its size calculated by
Z_THREAD_STACK_SIZE_ADJUST() instead. Depending on the arch
alignment requirement, they may not be the same... which
could cause some confusions. So align them both to use
K_THREAD_STACK_LEN().
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When kernel stack is defined as an array, K_KERNEL_STACK_LEN()
is used to calculate the size for each stack in the array.
However, standalone kernel stack has its size calculated by
Z_KERNEL_STACK_SIZE_ADJUST() instead. Depending on the arch
alignment requirement, they may not be the same... which
could cause some confusions. So align them both to use
K_KERNEL_STACK_LEN().
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Simple rename to align the kernel naming scheme. This is being
used throughout the tree, especially in the architecture code.
As this is not a private API internal to kernel, prefix it
appropriately with K_.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Simple rename to align the kernel naming scheme. This is being
used throughout the tree, especially in the architecture code.
As this is not a private API internal to kernel, prefix it
appropriately with K_.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add a closing comment to the endif with the configuration
information to which the endif belongs too.
To make the code more clearer if the configs need adaptions.
Signed-off-by: Simon Hein <Shein@baumer.com>
Use thread wherever it makes sense, using 't' in some places can get
confused with 't' used for timeouts for example.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move thread monitor related functions, not enabled in most cases outside
of thread.c and cleanup headers.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move out of thread and put directly in init.c where it is being used.
Also remove definition from kernel.h, this is an internal function and
should not be in a public header.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The functions to manipulate the essential flag indeed operate on
threads, but they are misplaced in the thread implementation file. Put
them alongside other routines setting other thread flags and cleanup
headers a bit.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move spin_lock validation outside of thread.c into own file. This code
really has nothing to do with the thread code.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When allowing dynamic thread stack allocation the stack may come from
the heap in coherent memory, trying to use cached memory is over
complicated because of heap meta data and cache line sizes.
Also when userspace is enabled, stacks have to be page aligned and the
address of the stack is used to track kernel objects.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Traditionally, k_thread_create() has required that the application
size the stack correctly. Zephyr doesn't detect or return errors and
treats stack overflow as an application bug (though obviously some
architectures have runtime features to trap on overflows).
At this one spot though, it's possible for the kernel to adjust the
stack for K_THREAD_STACK_RESERVED in such a way that the arch layer's
own stack initialization overflows. That failure can be seen by
static analysis, so we can't just sweep it under the rug as an
application failure.
Unfortunately there aren't any good options for handling it here (no
way to return failure, can't be a build assert as the size is a
runtime argument). A panic will have to do.
Fixes: #67106Fixes: #65584
Signed-off-by: Andy Ross <andyross@google.com>
Export some symbols for loadable modules. Also add an
EXPORT_SYSCALL() helper macro for exporting system calls by their
official names.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
The halt queue will be used to identify threads that are waiting
for a thread on another CPU to finish suspending.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Move the syscall_handler.h header, used internally only to a dedicated
internal folder that should not be used outside of Zephyr.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
k_thread_name_get has inconsistent signature. In the function
declaration it uses k_tid_t but in the implementation it is using
struct k_thread *. Change the implementation to use k_tid_t.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Rename z_early_boot_rand_get with z_early_rand_get to get consistent
with other early functions.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Platforms that determine their basic timer frequency at runtime instead of
build time cannot compute thread initialization timeouts during
compilation.
Switch back to storing the init_delay value in milliseconds and perform the
conversion to a k_timeout_t at runtime.
Signed-off-by: Keith Packard <keithp@keithp.com>
rand32.h does not make much sense, since the random subsystem
provides more APIs than just getting a random 32 bits value.
Rename it to random.h and get consistently with other
subsystems.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Integrates object core statistics framework into the following
kernel objects:
sys_mem_blocks, k_mem_slab
threads, _cpu, z_kernel
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Storing this value in milliseconds rather than using k_timeout_t requires
the system to perform division at runtime to convert types. This pulls in
the 64-bit soft division code on platforms without hardware for this.
Perform the conversion at build time instead by using the runtime time
directly.
The init_delay field was moved within the _static_thread_data structure to
avoid introducing a hole for alignment on 32-bit systems when using 64-bit
timeouts.
Use SYS_TIMEOUT_MS instead of K_MSEC so that the initial delay can be set
to forever.
Signed-off-by: Keith Packard <keithp@keithp.com>
This header does not expose any public APIs, so move it under
kernel/include and change files including it.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Until now iterable sections APIs have been part of the toolchain
(common) headers. They are not strictly related to a toolchain, they
just rely on linker providing support for sections. Most files relied on
indirect includes to access the API, now, it is included as needed.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Updates events to prevent a timeout from corrupting the list of
threads that needs to be waken up.
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
Change for loops of the form:
for (i = 0; i < CONFIG_MP_NUM_CPUS; i++)
...
to
unsigned int num_cpus = arch_num_cpus();
for (i = 0; i < num_cpus; i++)
...
We do the call outside of the for loop so that it only happens once,
rather than on every iteration.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
The dummy thread doesn't include a TLS area, so any thread local variables
will fail to work if used in the switched_out tracing hook. Skip the hook
in this case, as it's not really accurate anyways; the dummy thread is
only used to set context for the initial switch for each core.
Signed-off-by: Keith Packard <keithp@keithp.com>
Using char pointers for %p should be avoided in log messages. It will
cause issues in configurations where logging strings are removed from
the binary and they are not inspected when cbprintf packages from
logging string are built. In that case any char pointers are treated as
strings and copied into the pacakge body.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The function k_thread_runtime_stats_all_get() now populates the
current_cycles field in the thread runtime stats structure.
Resets the number of cycles in the CPU's current usage window once
the idle thread is scheduled.
Fixes the average_cycles calcuation.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
