The function dai_ssp_poll_for_register_delay() is meant to poll the
register until the value of the mask bits is equal to the "val"
argument or until poll timeout has occured. WAIT_FOR() returns the value
of the checked expression, so the check should be modified accordingly.
This should prevent the errors seen during every SSP trigger as below:
<err> dai_intel_ssp: dai_ssp_poll_for_register_delay poll timeout reg 487432 mask 4 val 4 us 125
<err> dai_intel_ssp: dai_ssp_poll_for_register_delay poll timeout reg 487496 mask 63 val 0 us 937
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Remove all init functions that do nothing, and provide a `NULL` to
*DEVICE*DEFINE* macros.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The OFLEN bit has to be set by the host driver for ACE2.x. The
ownership of the IP is now handled at the host driver level, no longer
the firmware.
Setting it at the firmware level is a no-op if the bit is already set
by the host driver, and will fail it isn't already set.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
This patch fixes i2svss field initialisation in Device Tree for LNL
platform. It fixes this bug: #482
Problem is observed only when using SSP_BLOB_VER_1_5 version.
Unfortunatelly this version is not tested in FW validation tests.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
Clearing SPA bit together with OFFLEN bit causes FW hang.
This patch changes sequence to avoid that situation.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The upper ssp slot number should be retrieved from configuration
blob to support all possible settings. This patch fix this issue.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Repleace usage of shim2 device tree field with hdamlssp.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In LNL platform GPDMA and ALH is no longer used. SSP uses LINK HDA
as a DMA engine. Therefore new shim, new register definitions and new
programming flows were defined.
This patch implements new SSP programming requirements for LNL.
Since HDA is shared between Host and DSP, link_config field was added to
dai_config structure. This one is provided by Host in new IPC4 fields
during interface configuration.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
The OFLEN bit has to be set by the host driver for ACE2.x. The
ownership of the IP is now handled at the host driver level, no longer
the firmware.
Setting it at the firmware level is a no-op if the bit is already set
by the host driver, and will fail it isn't already set.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
In LNL platform GPDMA and ALH is no longer used. DMIC uses LINK HDA
as a DMA engine. Therefore new shims, new register definitions and new
programming flows were defined.
This patch implements new DMIC programming requirements for LNL.
Since HDA is shared between Host and DSP, link_config field was added to
dai_config structure. This one is provided by Host in new IPC4 fields
during interface configuration.
Signed-off-by: Jaroslaw Stelter <Jaroslaw.Stelter@intel.com>
Ignore the link clock_source for non-ACE platforms instead of throwing
an error when it is set in the topology.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
With this patch DMIC device after init will be in OFF state. When power
domain will be powered-up device will switch into suspended state and
change it to active only when is used.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
Since the device need to be first powered-up by the power domain, it has
more sense that device is in off state at the beginning.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
When releasing a paused stream, clearing MIC_MUTE bit is necessary.
Without unmuting there will be no input data after resume.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Clearing SOFT_RESET bit applies to ACE as well. In case of ACE,
this should be done before setting start bits for CIC and FIR.
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Unify the drivers/*/Kconfig menuconfig title strings to the format
"<class> [(acronym)] [bus] drivers".
Including both the full name of the driver class and an acronym makes
menuconfig more user friendly as some of the acronyms are less well-known
than others. It also improves Kconfig search, both via menuconfig and via
the generated Kconfig documentation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This change produces more quickly in the stream valid
audio samples. The start fade-in ramp can be shortened to
100 ms for 48 kHz and 200 ms for 16 kHz. It was before 200 ms
and 400 ms. The updated DMIC hardware in allows to do this
change.
Signed-off-by: Seppo Ingalsuo <seppo.ingalsuo@intel.com>
Intel SSP configuration can have auxiliary data embedded after it in a
variable length tlv array. Enable the parsing of this data and add the
data structs to describe the contents.
For now add support only for new version 1.5 blob. This is because
legacy blob doesn't have size field to describe its variable size.
Auxiliary data parsing has currently only 1 setting for link clock
needed in ACE platforms.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Add support for newer data blob version 1.5. Refactor the code to re-use
the common register setting. Clock setting will be handled differently
with legacy and version 1.5 blob.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Modify dai_config_get function to have the config struct as argument.
This was not a showstopper but a request in the API review.
In the same patch modify all Intel dai drivers using the API to preserve
bisect/compile.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
The dai.h interface does not prohibit calling dai_config_get()
with different direction values. The dmic driver should handle
invalid direction value explicitly and not rely on an assert.
Link: https://github.com/thesofproject/sof/issues/6896
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Enable Zephyr device runtime power management mechanisms in Intel DMIC
driver. This allows Zephyr to track usage reference for power domain
gating.
Signed-off-by: Tomasz Leman <tomasz.m.leman@intel.com>
add Intel HDA DAI driver
Long device list in dtsi needs to be refactored in the future
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
This fixes an issue with periodic_start feature that is only
present in newest dmic hw (starting from ACE).
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
On ACE RSE bits should be cleared unconditionally
if ssp is no longer in use
This will allow to successfully disable SSP in
dai_ssp_pm_runtime_dis_ssp_power()
and enable it correctly in the next run
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
The reference count, dp->sref, is never incremented for the SSP DAI as
we use the runtime PM API's to probe/remove the DAI during
resume/suspend. Therefore, use the DAI state to check if the DAI is
active in any direction before proceesing to set the config. This fixes
the IO errors seen during simultaenous playback and capture on the same
SSP.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
struct dai_intel_dmic never had a "created" member, so this assert seems
to be accidentally left in the code. Remove it to allow building builds
with dmic driver with asserts enabled.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
DMIC does not need to use SOFT_RESET bit to start collecting data if
periodic_start bit is enabled.
Signed-off-by: Damian Nikodem <damian.nikodem@intel.com>
Change automated searching for files using "IRQ_CONNECT()" API not
including <zephyr/irq.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The code was missing #include <zephyr/kernel.h> which
caused a compilation error. Missing header has been added.
Signed-off-by: Adrian Warecki <adrian.warecki@intel.com>
Use fifo address from device tree to create the device structs.
Also modify shim initialization as it was changed from array to
int. Fix cosmetic tab in device init macro.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Instead of using SoC versions, define the information about base and
extended ports on Kconfig, and use this information from there.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Instead of using version of the SoC, declare on Kconfig the need for it,
and use this information to decide upon enabling the code or not.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Update dai drivers to use DT_HAS_<compat>_ENABLED Kconfig symbol
to expose the driver and enable it by default based on devicetree.
Signed-off-by: Kumar Gala <galak@kernel.org>
Dai index should be added to config as it can be queried by the
application like sof. Also check for dynamically allocated params
when returning the config.
Signed-off-by: Jaska Uimonen <jaska.uimonen@linux.intel.com>
Enable Zephyr device runtime power management mechanisms in Intel SSP
driver. This allows Zephyr to track usage reference for power
domain gating.
Signed-off-by: Krzysztof Frydryk <krzysztofx.frydryk@intel.com>
With addition of DAI_TRIGGER_COPY, the trigger callback may
be called at a very high rate.
Reduce the logging level from INF to DBG for the logs in
dai_ssp_trigger().
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Intel ADSP CAVS is now a proper series with all CAVS SoCs running under
it. This will give us to Intel ADSP series:
- CAVS
- ACE v1.x
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The ALH is an intermediary device, which acts as a hub and provides an
abstracted support for numerous sound interfaces (e.g. SoundWire).
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Enables the Intel SSP driver by default when the DAI driver class is
enabled (CONFIG_DAI=y) and a compatible devicetree node
("intel,ssp-dai") is enabled.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
