Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* it's based on ARC SecureShield
* add basic secure service in arch/arc/core/secureshield
* necesssary changes in arch level
* thread switch
* irq/exception handling
* initialization
* add secure time support
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* use global free running counter as global wall clock (clock source)
* use arc internal timer 0 as local time event (clock event)
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
On some SoCs the frequency of the system clock is obtained at run time
as the exact configuration of the hardware is not known at compile time.
On such platforms using CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC define
directly introduces timing errors.
This commit replaces CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC by the call
to inline function sys_clock_hw_cycles_per_sec() which always returns
correct frequency of the system clock.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Move internal and architecture specific headers from include/drivers to
subfolder for timer:
include/drivers/timer
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rename reserved function names in drivers/ subdirectory. Update
function macros concatenatenating function names with '##'. As
there is a conflict between the existing gpio_sch_manage_callback()
and _gpio_sch_manage_callback() names, leave the latter unmodified.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
* MIN_DELAY: 1024 -> 512
* optimzie some code sequence
* fix a bug in setting the new timer limit value
* case: before set limit register with new value,
if counter rolls back to 0, the limit value should be
adjusted.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
I was pretty careful, but these snuck in. Most of them are due to
overbroad string replacements in comments. The pull request is very
large, and I'm too lazy to find exactly where to back-merge all of
these.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Rename timer driver API functions to be consistent. ADD DOCS TO THE
HEADER so implementations understand what the requirements are.
Remove some unused functions that don't need declarations here.
Also removes the per-platform #if's around the power control callback
in favor of a weak-linked noop function in the driver initialization
(adds a few bytes of code to default platforms -- we'll live, I
think).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The existing API had two almost identical functions: _set_time() and
_timer_idle_enter(). Both simply instruct the timer driver to set the
next timer interrupt expiration appropriately so that the call to
z_clock_announce() will be made at the requested number of ticks. On
most/all hardware, these should be implementable identically.
Unfortunately because they are specified differently, existing drivers
have implemented them in parallel.
Specify a new, unified, z_clock_set_timeout(). Document it clearly
for implementors. And provide a shim layer for legacy drivers that
will continue to use the old functions.
Note that this patch fixes an existing bug found by inspection: the
old call to _set_time() out of z_clock_announce() failed to test for
the "wait forever" case in the situation where clock_always_on is
true, meaning that a system that reached this point and then never set
another timeout would freeze its uptime clock incorrectly.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There were three separate "announce ticks" entry points exposed for
use by drivers. Unify them to just a single z_clock_announce()
function, making the "final" tick announcement the business of the
driver only, not the kernel.
Note the oddness with "_sys_idle_elapsed_ticks": this was a global
variable exposed by the kernel. But it was never actually used by the
kernel. It was updated and inspected only within the timer drivers,
and only so that it could be passed back to the kernel as the default
(actually hidden) argument to the announce function. Break this false
dependency by putting this variable into each timer driver
individually.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The system tick count is a 64 bit quantity that gets updated from
interrupt context, meaning that it's dangerously non-atomic and has to
be locked. The core kernel clock code did this right.
But the value was also exposed to the rest of the universe as a global
variable, and virtually nothing else was doing this correctly. Even
in the timer ISRs themselves, the interrupts may be themselves
preempted (most of our architectures support nested interrupts) by
code that wants to set timeouts and inspect system uptime.
Define a z_tick_{get,set}() API, eliminate the old variable, and make
sure everyone uses the right mechanism.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This was another "global variable" API. Give it function syntax too.
Also add a warning, because on nRF devices (at least) the cycle clock
runs in kHz and is too slow to give a precise answer here.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The benchmark application timing_info needs certain hooks to be
present in the kernel to get the accurate measurements. This
patch adds these hook at all the required locations.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Add tickless kernel support. Sets timer always in one
shot mode to the time the kernel scheduler needs the
next timer event. Uses mili seconds as the scheduling
time unit.
Jira: ZEP-1817
Change-Id: Ia2e63711cdd9d7d9c241b9ff08a606aa79575012
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types. This handles the remaining includes and kernel, plus
touching up various points that we skipped because of include
dependancies. We also convert the PRI printf formatters in the arch
code over to normal formatters.
Jira: ZEP-2051
Change-Id: Iecbb12601a3ee4ea936fd7ddea37788a645b08b0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I08f51e2bfd475f6245771c1bd2df7ffc744c48c4
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
CONFIG_* usually come from Kconfig, rename variables that are locally
defined to avoid confusion about where they are set.
Change-Id: I83b8459913c5deb68dc1b9f5386b8934363a6d1f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It's possible the timer interrupt could occur when performing the
computation, resulting in incorrect values returned.
It's still possible for bad values to be returned if the function is
called with interrupts locked, but that is only fixable with a second
timer source.
Issue: ZEP-1546
Change-Id: I16d5b04c3e32377f7249eb4fb1bf2f7c22bd0836
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some arches may want to define this as an inline function, or
define in core arch code instead of timer driver code.
Unfortunately, this means we need to remove from the footprint
tests, but this is not typically a large function.
Issue: ZEP-1546
Change-Id: Ic0d7a33507da855995838f4703d872cd613a2ca2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Force-align all variables defined via asm .word to ensure 4-byte
alignment.
The straddled_tick_on_idle_enter variable was a bool, which resolved in
an one-byte quantity. Changing it to a 32-bit integer. It would have
occupied 4 bytes anyway with alignment.
Fixes ZEP-1549.
Change-Id: If5e0aa1a75dbc73d896b44616f059d221fe191c6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
When going into DEEP_SLEEP state, the ARC timer
needs to be restored.
This implements the function to restore the timer
after sleep.
As the time spent during sleep is not currently known,
the timer is expired to reschedule the application task.
Jira: ZEP-1224
Change-Id: I22a30d0fd79f177cf166b9a29dc78d68f7d7fbad
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
This commit replaces the nanokernel.h include by kernel.h.
Change-Id: Ib42fbf2d9f77a73c0831f569b3dbbfb342ea2e1d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Defined in all SoCs, but never referenced anywhere. That definition has
been replaced by CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC.
Change-Id: I1801f72a03925717ded6fbfdef22b1993f843461
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
A previous re-work of IRQ priorities was led astray by an incorrect
comment. Priority level 1 is not a non-maskable interrupt priority.
In addition, zero latency IRQs are not implemented on ARC.
Timer driver now doesn't specify IRQ_ZERO_LATENCY (as that wouldn't be
correct) and its IRQ priority is now tunable in Kconfig. The default is 0.
IPM driver on both ARC and x86 side were being configured with hard-coded
priority of 2, which wasn't valid for ARC and caused an assertion failure.
The priority level is now tunable with Kconfig and defaults to 1 for ARC.
Issue: ZEP-693
Change-Id: If76dbfee214be7630d787be0bce4549a1ecbcb5b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We have already done this on x86 and ARM. The policy is as follows:
* IRQ priority levels starting at 0 all have the same semantics and
do not have special properties. The priority level is either ignored
on arches which do not support programmable priority levels, or lower
priority levels take precedence over higher ones.
* Special-case priorty levels are specified via flags, in which case
the supplied priority level is ignored.
Issue: ZEP-60
Change-Id: Ic603f49299ee1426fb9350ca29d0b8ef96a1d53a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Building microkernel for ARC causes a compiler error
due to missing declaration of _sys_idle_elapsed_ticks.
Declare this as extern.
Jira: ZEP-397
Change-Id: I83701f693fea0fcb1ae2c30e0c52abe7987de1f1
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
The timer implementation for ARC currently requires timer0 to be present.
I've added a comment that this is an assumption and to encourage developers
to build the ARC CPU with Timer0, when it is to be used with Zephyr.
There is also an optional provision for a Timer1. In future, this
code could be conditional to use either timer.
Change-Id: I4eb3aec59ba4e85f8b70d5531b21bdaab00b93bb
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
ASSERT are put each time the timer0 limit register or the timer0 count register
is modified.
Change-Id: I38684d57803de285f4e26c68b449c71396e4c750
Signed-off-by: Simon Desfarges <simon.desfarges@intel.com>
When exiting from tickless idle uppon an external IRQ, the TICK timer
is set to fire at next TICK boundary. The current algorithm can lead
to a point that timer0_count register is higher than the timer0_limit
register.
In this situation the next TICK will fire after the counter has
wrapped and performed another cycle (~133 seconds).
This condition appears when the counter reaches the limit after the
Interrupt Pending flag is checked. At this point the counter is
automatically wrapped to 0, but is set just next to the limit to fire
at next TICK boundary by SW. At exit of the _timer_idle_exit function,
the timer handler is called, and sets the limit to 1 TICK. At this
point the situation is:
- limit register == 1 TICK
- count register is just below the old limit register and higher than
1 TICK
To fix this issue, at _timer_idle_exit, the limit register is always
set to 1 TICK and the count register set such as the next TICK fires
on time.
Change-Id: Ifa002809d426aa04109592e53d2b02a224f51101
Signed-off-by: Simon Desfarges <simon.desfarges@intel.com>
The timer counts from 0 to programmed_limit included.
Change-Id: Ifc8585210c319f5452fafc911d4f6d72c4b91eaa
Signed-off-by: Simon Desfarges <simon.desfarges@intel.com>
It's not a function and requires all its arguments to be build-time
constants. Make this more obvious to the end user to ease confusion.
Change-Id: I64107cf4d9db9f0e853026ce78e477060570fe6f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Change-Id: Id2ee328458c5a1be944e90c34bbc2158464be325
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
