Use new device name for SPI device
Jira: ZEP-1704
Change-Id: Iec39468bbef54423af2b3a681dd4ae1eee866d1e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Currently the BLE modules on the Panther boards are configured to use
a 115200 baudrate.
Change-Id: I093db68c0fc172757b5878401b99ada7ae0c99d9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Panther is a board based on Quark SE C1000 SoC.
Change-Id: I66653c40efcb7e04748a21ea622debee23d7d6c0
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit changes Kconfig prefix for ieee802154 drivers to
IEEE802154_*. This is done for consistency with config prefixes
used in other subsystems.
Change-Id: Ibbb4d96d2b748f4f13135bde85304ec34c5a90a6
Signed-off-by: Wojciech Bober <wojciech.bober@nordicsemi.no>
Working Ethernet, and actually even successfully booting with Ethernet
enabled (and Ethernet is enabled by default on enabling networking)
so far requires a network cable attached.
Change-Id: I9c17e417f867942ddf085db9e8342e945aa07370
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Added a linker script that shall be common to most riscv SOCs.
Linker script also accounts for execution in place in ROM, when
CONFIG_XIP is set.
Nonetheless, riscv32 SOCs (like pulpino) requiring a different
system layout can still define their own linker script.
Change-Id: I3ad670446d439772c29a8204e307ac79643dc650
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
riscv defines the machine-mode timer registers that are implemented
by the all riscv SOCs that follow the riscv privileged architecture
specification.
The timer registers implemented in riscv-qemu follow this specification.
To account for future riscv SOCs, reimplement the riscv_qemu_driver by
the riscv_machine_driver.
Change-Id: I645b03c91b4e07d0f2609908decc27ba9b8240d4
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
These two docs have a long skinny list of items that displays
better as a multi-column list (using the hlist directive).
Change-Id: Ia1a1f8555bdefe0c9051944d9946299395258bfc
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Origin: Original
Jira: ZEP-979
Change-Id: I1af64364b5b3b4aadbee225ee8f89615fa292863
Signed-off-by: Piotr Mienkowski <Piotr.Mienkowski@schmid-telecom.ch>
Following comments on nucleo_f411re doc, update doc for
nucleof401re
Change-Id: I86b7a016b604a31e210e425718e835e15560a46a
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This patch updates the mps2_an385 documentation adding the information
of the CMSDK (Cortex-M System Design Kit) GPIOs Pinmuxing.
Change-Id: Icab0d47bf1a58be058f036fb3db346ef6390266a
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch updates the mps2_an385 documentation adding the information
of the new added CMSDK (Cortex-M System Design Kit) Drivers.
Change-Id: I5615ebec13e8831a0360fc32cfd8be0d3ebc85b5
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
This patch enables the CMSDK (Cortex-M System Design Kit) Drivers on
mps2_an385 (Cortex M3).
Change-Id: Iff51141a183ac94ad6b905acf10389ca94a451d3
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Adds initial support and documentation for the frdm_kw41z board.
- Configures the kw41 to use the 32 MHz external oscillator on the board
to generate a 40 MHz system clock. The clock settings match the MCUX
SDK hello_world example project.
- Provides pinmux settings for the uart, i2c, LEDs, and switches
- Enables pinmux, gpio, uart, and i2c driver instances
- Configures the fxos8700 accelerometer/magnetometer driver
Jira: ZEP-1390
Change-Id: I025a0eae3d380eaf90b02683acf5c592e2204a2e
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add a label in the arduino 101 document for the flashing
bluetooth instructions, and link to that instead of the
wiki page (deprecated).
Change-Id: Ie39240cdf4881356f634d21ead1d7ae93ccd60a1
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Remove dev driver and integrate it in the default pinmux driver.
Jira: ZEP-958
Change-Id: I55670240f8a21749d3a6ae22e300e16ba80a2fb6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
ARM's Cortex-M Prototyping System (MPS2) is a board with an FPGA that
can be programmed with different 'SoCs'. To use these in Zephyr we need
a set of board files for each variant.
This adds a board for a variant which implements a Cortex-M3 CPU; the
naming of this matches that used for the Zephyr SoC (which is itself
based on ARM's documentation nomenclature).
Change-Id: Ie02a67a03016b8aeee31e3694f0edbcc37f9ee64
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Add the GPIO pin and port definitions for the LEDs available on the
board.
Change-Id: I586a0ebfbbe8fa6e50dd1f91c1437665dd8ec677
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Add the GPIO pin and port definitions for the button and LEDs available
on the board.
Change-Id: If74cf9d780227346c7c8816e6eadca00b16953b2
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
This patch updates the default defconfig in order to support the new
Timers implementation.
Jira: ZEP-1300
Change-Id: I749042bcf41c6b4cb11614315c3c2ce09cdb2aa8
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Since commit "build: use target 'debugserver' for Qemu debugging",
DEBUG_SCRIPT should be used to enable make debug option
This commit provide debug option to following boards:
nucleo_f334r8
nucleo_f401re
stm3210c_eval
stm32373c_eval
Change-Id: I92eb36257b6e05125440b0e83985d59bcda27aa8
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Stop using the specific uart_k20 driver by default and start using the
more generic mcux uart driver instead.
Jira: ZEP-719
Change-Id: I7b107ea7118887591362159283ebb5413b45595a
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This follows the board.rst template in the RFC
for board documentation:
https://gerrit.zephyrproject.org/r/#/c/9703/
This RST file was validated visually by rendering
using the online tool: http://rst.ninjs.org/
JIRA: ZEP-1541
Change-Id: Ibe6e1c7f8eb3c7862b4087a78b469693927280a2
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
The headings on some .rst files were not following the expected
heading order of using # for h1, * for h2, = for h3, and - for h4
This patch fixes that, and the doc/templates/*.tmpl files created
for folks to use as templates for creating board and sample docs.
Change-Id: I0263b005648558d5ea41a681ceaa4798c9594dd9
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
zedboard_pulpino
1) has a 16750 uart, which is compatible with the uart_ns16550 driver.
2) make use of the pulpino timer driver
Change-Id: Ifda710fc8dea547ada05bb42e604d7cfdff284d5
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
The qemu_riscv32 board makes use of:
1) the uart_riscv_qemu driver
2) the riscv_qemu_timer driver
Change-Id: I413e3990a66bc62a0d15d82ebca6940b381fed43
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
The k64 gpio driver quietly initializes the pinmux to force the pin to
be a gpio, regardless of the setting defined by the board's pinmux
table, or even if the pin was not in the pinmux table.
This behavior caused the accelerometer interrupt pin to be incorrectly
defined in the frdm_k64f and hexiwear_k64 pinmux tables.
Change-Id: If46df0e051452fef291d5ad5cdff56463d5f465e
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The hexiwear_k64 i2c pinmux settings were copied over incorrectly when
the new mcux pinmux driver was created.
Change-Id: I72e5f8f7c06e2d9b08921109691edaf311f3811b
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Moves the uart console pins from the k64 soc init to the frdm_k64f and
hexiwear_k64 board pinmux tables. Not having these pins in the board
pinmux tables led one to believe that no pins in PORTB were being used
on the hexiwear_k64 board, and thus the port was incorrectly disabled by
default.
Also fixes PORTB to be enabled by default if the uart console is used.
Change-Id: Ide6b7b34dfba8a75a02a8f2bf37cce843afb92f1
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Provide USER button and LD2 Led defines in order to get basic samples
"blinky" and "button" available on nucleo boards.
Defines have been named in order to match with board printing.
Aliases are provided to get compatibility with zephyr sample code.
Change-Id: Ie23a4f63c406def50b94a644d4e136d3bda1ceff
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Previously, CC3200 drivers had two options to use the peripheral
driver library APIs:
1) Build driverlib SDK files in Zephyr, in ext/hal/ti/cc3200/*
2) Link directly with the driverlib.a, from an externally installed
TI CC3200 SDK.
A new option is added to replace option 2), and is now the default:
3) Use the driverlib functions already provided in ROM.
This enables a savings in code size, which will depend on the
types of device drivers configured and the number of SDK
APIs actually used.
A rom_report build of the shell sample application showed
a savings of about 2kb in code space using this new config option.
Change-Id: Ie1ede6f7aacd23db20f5292e776f1dfeab5c7fe0
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Merges the ksdk pinmux dev driver into the regular ksdk pinmux driver,
which now exposes the public pinmux API. Removes the private ksdk pinmux
API and converts the frdm_k64f and hexiwear_k64 boards to use the public
pinmux API.
Jira: ZEP-958, ZEP-1432
Change-Id: Ie5f60b604133093050b9c596050cad776d7b7cb3
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enable PORTD on the frdm_k64f only if SPI_0 is enabled. Otherwise, there
are no pins in the pinmux table for this port and it should be left
disabled.
Change-Id: I7f8a05552f6a320debfd11a780be1092da831101
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Disable PORTA and PORTB by default on the hexiwear_k64 since there are
no pins in the pinmux table for these ports. Enable PORTE only if UART4
is enabled.
Change-Id: Ifdb01cacf0c475a9478454eb61474a930e22a628
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This patch adds the documentation page for the ARM V2M Beetle board into
the Zephyr tree.
Jira: ZEP-1300
Change-Id: I4f2fd9a4e496c0a674272f94bedcadf3c71d9971
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We get odd warnings associated with Kconfig because of this:
warning: symbol value '0# empty for now, use this file for global kernel
configurations and overrides.' invalid for CLOCK_STM32F4X_APB2_PRESCALER
Change-Id: I77c2828ab29dfa179f345953cc490dbd67fd0b5a
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fixes the following warning:
warning: override: reassigning to symbol UART_CONSOLE
Change-Id: I09805bdfa31146faf276ca4ec06487a5d71cdff5
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This will replace the current goal of 'make qemu' with 'make run' and
moves Qemu handling into its own file and into the boards instead of
being architecture specific.
We should be able to add new boards that support some other type of
emulation (by adding scripts/Makefile.<emu type>) and allow the board to
define their own options for the use type of emulation.
'make qemu' will still work, however it will be deprecated, starting
with this commit it is recommended to use 'make run'.
Jira: ZEP-359
Change-Id: I1cacd56b4ec09421a58cf5d010e22e9035214df6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the existing debugserver target also for Qemu debugging. Qemu
should be maintained as one of many emulation/simulations platforms and
emulation should be abstracted in the Makefiles and not tied to Qemu.
qemugdb will still work, it is however being deprecated.
Change-Id: I0cd10fb66debb939b8f7f1304bf2ef4605da6a1d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Re-add board documentation and integrate into the project online
documentation.
Setup sphinx to pick any new board documentation added to boards/*.
Change-Id: Id208d5ef923f8806135879dd33a55ed527dc5f27
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Disk IO functions are used by both FS and USB Mass Storage.
This patch refactors those from FS directory to a separate one.
In addition existing, config options were modified to make
stuff meaningful.
Jira: ZEP-1276
Change-Id: Ia2a2e18f3dbbbdb964c3dc0427d8138ad86134cd
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Remove legacy option and use SYS_CLOCK_EXISTS where appropriate.
Change-Id: I3d524ea2776e638683f0196c0cc342359d5d810f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enable arc to access the spi controller on I/O fabric.
There are two spi controllers on quark se SoC. One is attached
to the I/O fabric and the other one is in the sensor system.
X86 cpu is only able to access the spi controller on the I/O
fabric and the access is supported by existing code. HW allows
arc to access both controllers. But, the existing code only
gives arc access to the controller in the sensor sub-system.
Let's grant arc the access to the controller on I/O fabric as
well by the following changes.
1. Add spi_qmsi.c into arc compilation.
2. Use the already defined macros to choose interrupt numbers
and do interrupt unmasking automatically based on the
compilation targets.
3. Add new symbols in Kconfig including driver names for both
controllers
Jira: ZEP-1190
Change-Id: I40a5d423d4b7986a897834d1a3831938005eda6f
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
ZEP-1317 records a problem were em_starterkit appears to boot up
EM7d, sometimes, due to a misread of the dip-switches.
This could be a mechanical issue. I am seeing it on my board too,
and I often have to struggle with the dip-switch to get it to boot
EM9D. For automated-testing, perhaps it is better if the default is
EM7D, since this is the all-switches-up and contact in the switch
isn't needed. Meanwhile, I'll work with our board team to try to get
to the bottom of this.
ZEP-1317
Change-Id: I41095c1d8b07ce156cc3856a50196c064af2ee18
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The basic button sample expects SW0_GPIO_NAME and SW0_GPIO_PIN macros to
be defined by board.h. The frdm_64f doesn't have a physical switch with
this name, so create an alias to SW3 to make the sample work.
Change-Id: I61eb096582d9898dbcb9799e69078ad0c4b700cf
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The basic blinky sample expects LED0_GPIO_PORT and LED0_GPIO_PIN macros
to be defined by board.h. The frdm_k64f and hexiwear_k64 boards don't
have a physical LED with this name, so create an alias to the green LED
to make the sample work.
Change-Id: I3426c571bb2e3165dbd9f4372d863b474c35fd5c
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Previously, UART clock enable was done in pinmux init.
This is now moved into soc initialization, along with other
power related initialization routines.
Change-Id: I1f9464655ad966e9caac2d238006f12a06b202ab
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Previously, running UART applications in Zephyr from sFlash would
not show consistent character output.
The PRCM clock enable for UART was missing the sleep mode while
enabling the UART clock.
This has been fixed, and verified with philosophers (polled output)
and shell (interrupt driven) zephyr examples running from sFlash.
Change-Id: I95a87996f252d82b0c1c13d3f77535971b5cf9c5
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
For the basic samples to work, button and LED definitions are required
in board.h. These map the buttons and LEDs present on the board to
the corresponding GPIOs they are wired into.
In this particular case the LEDs are actually arranged in a 3x9 matrix,
with the GPIOs wired to the rows and columns of said matrix. An upcoming
patch will provide utility functions to access the matrix.
Change-Id: Icce93ee6a08ae28445c6dc4a41529105ac80f14a
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
For the basic samples to work, button and LED definitions are required
in board.h. These map the buttons and LEDs present on the board to
the corresponding GPIOs they are wired into.
Change-Id: Ia0be30cecd8c0ceabb495258480eb6f3ce13d3e5
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
For the basic samples to work, button and LED definitions are required
in board.h. These map the buttons and LEDs present on the board to
the corresponding GPIOs they are wired into.
Change-Id: I2785441c286b95fd77e636e9bf3d68bc9f5a1acc
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
For the basic samples to work, button and LED definitions are required
in board.h. These map the buttons and LEDs present on the board to the
corresponding GPIOs they are wired into.
Change-Id: I60903eb834ef1b2618b0525896c120fca84db177
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
To make way for the upcoming blinky and GPIO support for nRF5x-based
boards, this change addresses the hardcoded dependencies in Kconfig
default configurations of the different boards, moving the common option
defaults to the SoC default configuration itself.
Change-Id: I8db0750311ad5a12b76237b39438376f20f6f496
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Adds generic definitions for GPIO pins for onboard LEDs and
switches to enable the basic blinky, button, and disco
Zephyr examples for the TI CC3200 LaunchXL.
Change-Id: Iac0ed2ad01285f9e84eea1fa7013771ddd8d3a78
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Leverages the configuration generated by the TI recommended PinMux
utility to enable pins for the 4 GPIO ports on the CC32xx LaunchXL
board, pre-configuring GPIOs for the onboard:
- 3 LEDs, and
- Two user push buttons (SW2, SW3).
The pinmux configuration is used in lieu of a Zephyr
pinmux driver, and is called during board initialization.
Change-Id: Id2403fc2ec3fcc0a62ee5149e1ac596e7e06ead4
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
With the appearance of the nRF52840 IC a new Preview Development Kit
(PDK) board has been introduced. This patch adds basic support for this
new board.
JIRA: ZEP-1418
Change-Id: If5845e75312ec756b968e595e5dc31c4c9624be2
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In preparation for the new Nordic MDK and nRF52840 IC support this patch
adds the specific nRF52832 IC model in the pca10040 board default
config, so that future boards with different ICs from the same nRF52
series are supported correctly.
JIRA: ZEP-1418
Change-Id: Ic7c2076eeeb33fb729e4dbba2ff4702ab812a826
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
