These interrupts are for ISRs that need the lowest possible latency.
They do not take parameters and are installed directly in the interrupt
vector table.
Issue: ZEP-1038
Change-Id: I7583e9191dd32d9253ad933181d2103a6e191dea
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
k_poll() is similar to the POSIX poll() API in spirit in that it allows
a single thread to monitor multiple events without actively polling
them, but rather pending for one or more to become ready. Such events
can be a direct event, or kernel objects (currently only semaphores and
fifos).
When a kernel object being polled on is ready, it is not "given" to the
poller: the poller must then acquire it via the regular API for the
object (e.g. k_sem_take()). Only one thread can poll on a particular
object at one time. These restrictions mean that k_poll() is most
effective when a single thread monitors multiple events that are not
subject for contention. For example, being the sole reader on multiple
fifos, or the only thread being signalled by multiple semaphores, or a
combination of both.
Change-Id: I7035a9baf4aa016fb87afc5f5c0f5f8cb216480f
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Allow peeking at the fifo to see if there is an element without
dequeuing it.
Change-Id: I99cbe4495c81f1d7b77ad6a37cef4ec8c24d48eb
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
As cpu_idle.S is the only bit of code that is using the SCB asm defines,
so to allow us to remove scb.h in the future lets move the defines that
are used just into cpu_idle.S
Jira: ZEP-1568
Change-Id: I3c3a6f145ec4c1a43f076d079d5fe1694c255b78
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Kill of nvic.h and use either CMSIS helper functions for NVIC or direct
NVIC register access via CMSIS for IRQ handling code.
Jira: ZEP-1568
Change-Id: If21910b9293121efe85c3c9076a1c2b475ef91ef
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move the exception priority related defines into exc.h out of nvic.h
Change-Id: I7ded917a3f6f7cdbc506b2f70c22f37eddc5f5c7
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace _ScbExcPrioSet with calls to NVIC_SetPriority as it handles both
interrupt and exception priorities. We don't need to shift around the
priority values for NVIC_SetPriority.
Jira: ZEP-1568
Change-Id: Iccd68733c3f7faa82b7ccb17200eef328090b6da
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Renames the flash security section so it makes sense for other Kinetis
devices, not just k64. In Kinetis reference manuals, this section is
referred to as the 'flash configuration field'.
Change-Id: I2b7c7cc1ec2541419d77878d367d96c9ceb7a0cf
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The functions that implement usb_request_handlers are already using an
int32_t for transfer_len, so lets make the typedef match. This address
a potential issue in the future when the typedef of int32_t changes (or
when building with newlib).
Change-Id: I6e478551c38f2040b0dcec47c2e4c565c27acdd0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Added structure definition for stream end points
and the a2dp stream.
Change-Id: I6d0cc08611f5179397bea6200eb9244d7c1cc8d6
Signed-off-by: Piyush Itankar <piyush.t.itankar@intel.com>
This is mainly for backward compatibility with 1.0b devices and for
spec compliance. CFC is mandatory post 1.0b spec where in MSC FC
shall not be used.
FC bit in MSC is used to manage the flow control. If FC is 1 then
the device is unable to accept frames.
Implementation is done by reusing "tx_credit" as a binary semaphore
wherein it will be blocked if MSC is recieved with FC bit 1 and
unblocked if FC bit is 0. Once tx thread is scheduled then semaphore
should be always available until all the buf in queue is sent.
Change-Id: I91181668ec0f46ff0b02905dd97e4503fc1fa7a7
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Add SENSOR_CHAN_*_XYZ enum values to be used instead of
SENSOR_CHAN_*_ANY, because the new naming takes into account that
they are used to fetch all the 3 axes for a channel (X, Y and Z)
and not just any number of them.
Also deprecate old SENSOR_CHAN_*_ANY enum values.
Change-Id: I59e9901c1f8879d084bdb7c95583c2b28aa1e025
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
The cause for this change is TCP. Until now, the radio strategy driver
(ALOHA or CSMA) was providing the actual nbuf, and not the buffer
fragment, counting on the fact that the loop was using
net_buf_frag_del() which made so, iteration after iteration, buffer
framgent to be always buf->frags. The problem with this logic is loosing
the fragments that might be still referenced by TCP, in case the whole
buffer did not make it so TCP can retry later and so on.
Instead, TX now takes the nbuf and the actual frag to send. It could
have been working with just a pointer on the data, and the whole length
of the frame. But it has been avoided due to possible future devices,
that will be smarter and run CSMA directly in the hw, thus it will
require to access the whole buffer list through the nbuf.
Change-Id: I8d77b1e13b648c0ec3645cb2d55d1910d00381ea
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Telnet "Interpret As Command" (IAC) code is ignored.
Change-Id: I882397389d77b8adfcbce62fbd9654c0b0412ae3
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's use the generic console input type now. This will be useful for
other console input drivers such as telnet.
Change-Id: I787a1e9d86481d5f8c4803453726d9042a89dea4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Input line length can be modified via Kconfig.
Change-Id: I3423fce9814e04b11d11e5d391f85fe1efbe8d17
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As for IN6ADDR_ANY_INIT, let's have an INADDR_ANY_INIT.
Change-Id: I07c9ec6d2bb20d3a228edaac2e3380942feac5fd
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Check if input parameters are valid or not. It might lead to crash
NULL address input.
Change-Id: Ib446ab0467268bca01f478cca3ece868c7c9e49b
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The net_context_connect() callback was being invoked synchronously
with the transmission of the SYN packet. That's not very useful, as
it doesn't tell the user anything they can't already figure out from
the return code. Move it to the receipt of the SYNACK instead, so the
app can know that it's time to start transmitting. This matches the
Unix semantics more closely, where connect(2) is a blocking call that
wakes up only when the connection is live.
Change-Id: I11e3cca8572d51bee215274e82667e0917587a0f
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Fold the OPEN_DRAIN GPIO interface into the DRIVE_STRENGTH interface.
The latter is more flexibile, suporting a larger range of hardware
capability.
Change-Id: I7ee01c8d375e3e4fe8ad10c075e365d246e83c75
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Provide a mechanism to configure different pin drive strengths on
hardware with that capability.
Configuration flags are provided to select each of DFLT, ALT and
DISCONNECT drive strengths independently for low and high outputs.
This provides sufficient flexbility to configure all of the drive
strength capability in at least nRF5 hardware.
The flags are chosen such that in the absence of a drive strength
flag a driver selects DFLT drive strength. This ensures that an
existing application that omits a flag continues to observe the
preexisting behaviour.
The behaviour of the drive strength flags is documented such that a
driver for hardware that does not support a particular drive strength
will simply defalt to the standard drive strength for that hardware.
Change-Id: I9894cc5e739a1899a4ecf795f2a5980b95b0c7a0
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The K_<thread option> flags/options avaialble to users were hidden in
the kernel private header files: move them to include/kernel.h to
publicize them.
Also, to avoid any future confusion, rename the k_thread.execution_flags
field to user_options.
Change-Id: I65a6fd5e9e78d4ccf783f3304b607a1e6956aeac
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
This will be needed for some thread user options that will move to
kernel.h since they are part of the user API.
Change-Id: I46e302b6cafcdddbad3458134b98feb5b8d45d9b
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Replace _scs_relocate_vector_table with direct CMSIS register access and
use of __ISB/__DSB routinues. We also cleanup the code a little bit to
just have one implentation of relocate_vector_table() on ARMv7-M.
Jira: ZEP-1568
Change-Id: I088c30e680a7ba198c1527a5822114b70f10c510
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As a first step towards removing the custom ARM Cortex-M Core code
present in Zephyr in benefit of using CMSIS, this change replaces
the use of the custom core code with CMSIS macros in
enable_floating_point().
Jira: ZEP-1568
Change-id: I544a712bf169358c826a3b2acd032c6b30b2801b
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Support using CMSIS defines and functions, we either pull the expect
defines/enum from the SoC HAL layers via <soc.h> for the SoC or we
provide a default set based on __NVIC_PRIO_BITS is defined.
We provide defaults in the case for:
IRQn_Type enum
*_REV define (set to 0)
__MPU_PRESENT define (set to 0 - no MPU)
__NVIC_PRIO_BITS define (set to CONFIG_NUM_IRQ_PRIO_BITS)
__Vendor_SysTickConfig (set to 0 - standard SysTick)
Jira: ZEP-1568
Change-Id: Ibc203de79f4697b14849b69c0e8c5c43677b5c6e
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
In preperation for removing the scb/scs layers and using CMSIS directly
lets remove all the _Scb* and _Scs* functions that are not currently
used.
Jira: ZEP-1568
Change-Id: If4641fb9a6de616b4b8793d4678aaaed48e794bc
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Now that we have a more generic mcux spi driver that can be used across
multiple Kinetis SoCs, remove the specific k64 spi driver.
Jira: ZEP-1374
Change-Id: Ifc324374f305837f5e3d2cfd7ad30d3608865b5b
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
On other targets, CONFIG_TEXT_SECTION_OFFSET allows the entire image to
be moved in memory to allow space for some type of header. The Mynewt
project bootloader prepends a small header, and this config needs to be
supported for this to work.
The specific alignment requirements of the vector table are chip
specific, and generally will be a power of two larger than the size of
the vector table.
Change-Id: I631a42ff64fb8ab86bd177659f2eac5208527653
Signed-off-by: David Brown <david.brown@linaro.org>
Implementation includes adding some defines in the pinmux,
adjusting gpio driver to specific defines for STM32F3X family,
adding specific functionality in the F3X SoC definition.
Change-Id: I465c66eb93e7afb43166c4585c852e284b0d6e67
Signed-off-by: Adam Podogrocki <adam.podogrocki@rndity.com>
_NvicSwInterruptTrigger is only utilized by a testcase for irq handling
on ARM-V7M. Just put the code into the testcase so we dont need to
support an additional interface.
Change-Id: I763c63c32a7a52918250458351d08b8fa54069dd
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The k20_sim.h used by the PWM driver has some defines that also exist in
the MCUX HAL. Lets pickup the values from the HAL and drop the one's
that are in k20_sim.h. Also, they aren't used by anything at this
point.
Change-Id: Iaed4e8e5cec7d57a5ce9e89480cecfb7dc90a5e6
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
It is useful that the user API can know whether the connection
was established properly or not. So this commit adds status
parameter to connect callback in net_context API.
The call to connect callback needs to be set properly in TCP
code. This commit does not fix the connect callback call which
is not properly done right now in net_context.c.
Change-Id: I284a60ddd658ceef9e65022e96591f467a936a09
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the parameter "timeout" is set in net_context_connect(), the
assumption by the user is that the function would wait for SYNACK
to be received before returning to the caller.
Currently this is not the case. The timeout parameter is handed
off to net_l2_offload_ip_connect() if CONFIG_NET_L2_OFFLOAD_IP is
defined but never handled in a normal call.
To implement the timeout, let's use a semaphore to wait for
tcp_synack_received() to get a SYNACK before returning from
net_context_connect().
Change-Id: I7565550ed5545e6410b2d99c429367c1fb539970
Signed-off-by: Michael Scott <michael.scott@linaro.org>
net_context is used for more than just TCP contexts. However,
the accept_cb field is only used for TCP. Let's move it from
the generic net_context structure to the TCP specific net_tcp
structure.
Change-Id: If923c7aba1355cf5f91c07a7e7e469d385c7c365
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The recv_data_wait field in struct net_context is described as a "Mutex"
when in fact it's a semaphore signal.
Change-Id: I3bef8d1a07ceb3da5894ae4cdc8f1fe3c61c5dbe
Signed-off-by: Michael Scott <michael.scott@linaro.org>
If TCP is not enabled, then compile out the TCP retransmit
list variable that is part of net_buf struct.
Change-Id: I07e188454d9be76ac93fe96405f00a89b967668a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In some situations, for example, when the remote side sends a RESET
message indicating that it is no longer interested in observing a
resource, it is helpful to have a way to obtain the obverser
representation.
Change-Id: Ifbf627f9170be844fd525c557dda8cb722ac7aff
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This status is used when a blockwise transfer should continue with the
next block.
Change-Id: If68c32aea8c0b63efcd929cdff57f0ff235b2792
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
If the prefix length % 8 is not 0, then the remaining
bit length was calculated incorrectly and the prefixes
were claimed to match even though they might not be the
same.
Adding a test cases for testing this properly.
Coverity-CID: 157591
Change-Id: I9cb5a73d5cc211ec183176400fa5e2dfd209e2da
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_linkaddr_storage structure contains an array of bytes used
to store the link address. This array can be different sizes
depending on the CONFIG options used when building. To facilitate
consistency and error checking let's introduce a new helper function
to copy the addr and len values to this structure.
Also move all uses of memcpy related to net_link_storage structures to
the new helper function.
Change-Id: Ic547d86b07e62e5ac3bc330d4eaeb4508a143200
Signed-off-by: Michael Scott <michael.scott@linaro.org>
- Introduce NET_LINK_ADDR_MAX_LENGTH which is either 6 or 8
depending on whether CONFIG_NET_L2_IEEE802154 is used
- Instead of being a placeholder single index array of uint8_t,
let's use NET_LINK_ADDR_MAX_LENGTH to assign the size of the
"addr" array field in the net_linkaddr_storage structure.
- Now that the "addr" field of net_linkaddr_storage contains the
true size of the link address, we can remove "storage" field
which was hard coded to 8 bytes (2 uint32_t's).
- Fix 2 references to the "storage" field of the net_linkaddr_storage
structure.
Change-Id: I2ea12058280b289f65085964eb7d503d4fd260c2
Signed-off-by: Michael Scott <michael.scott@linaro.org>
These previously had only been invoked from ASM domain.
Change-Id: Ia20caf1b02a4ceee16d964211874c5f798445fe2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Had only been called from ASM domain, but upcoming interrupt changes
invoke it from core arch C code as well.
Change-Id: Ifd831826068e130e2936cfa4da6c082c3433a5ae
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
These were causing some issues in the old kernel, but the unified
kernel no longer uses these.
Issue: ZEP-513
Change-Id: I87216565231cd244886fbffe4b4d420d1687b245
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In case the channel provides its own MTU and allocator it should be
able to store as much data as set in the MTU, based on that the code
can give enough credits to fill the entire channel MTU.
Change-Id: I291cf1bb643f200bde191914e814f681f4f65c3e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This helps catch any format string issues when using this API.
Change-Id: I9475eed4fa12e72182cc16b0fa4a358fa6faca8e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The new IS_ENABLED macro allows exposing conditionally enabled code
always to the compiler, even though it may not ultimately end up being
built. This is in particular useful for letting the compiler catch any
logging format string errors. Introduce a new BT_DBG_ENABLED macro
that c-files need to define before including <bluetooth/log.h> in
order to choose whether BT_DBG() logs are enabled or not.
When no Bluetooth logs are enabled the patch also modifies the log
macros to have the format strings checked with the help of the
__printf_like annotation and empty static inline functions.
Change-Id: Ie6bc8e10727b5b306f3ed0f94089a07a22583d9b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The idle priority was not accounted for.
With this change, the philosophers demo runs in coop-only mode.
Change-Id: I23db33687bcf3b2107d5fc07977143730f62e476
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
In such a case, the system must take the idle coop priority into
account.
Change-Id: Ica5a4a7a659cb165073e9b8042a77ed23a6a662a
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Introduce a new callback to bt_conn_cb that allows the application to
decide whether the accept or reject an incoming connection parameter
request. If the request is accepted the callback allows the
application to also adjust the values to what it thinks are more
appropriate.
The Zephyr Bluetooth API allows multiple registered connection
callbacks, so in principle there may be multiple le_param_req()
callbacks. It's recommended for an app to just use one (for clarity),
but if there are multiple the app is responsible for managing
potentially different requirements. In the case of multiple callbacks
each callback will receive the modified parameters in case a previous
callback modified them.
Jira: ZEP-1474
Change-Id: I098db5791aac521f1edfa9fefdf847db0a27e3a5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
BT_BUF_RX_SIZE is used for the RX buffer pool which is used for both
ACL data and HCI events. It should therefore not contain any
ACL-specific details. This patch removes the ACL header size from the
macro and instead makes taking it into account the responsibility to
the Kconfig option. Since buffer sizes are anyway rounded up to the
nearest multiple of 4 the default goes up from 70 to 76.
Change-Id: I41274d9131e7529d41c16bd66de95637fb150a29
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add proper documentations for all of the callbacks that are part of
the bt_conn_cb struct.
Change-Id: Iabce1d08a84c3849307c436a2cc528edffc62242
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Core Specification Supplement v7 defines one new ATT error code.
Change-Id: I4fe5341a6bbc57fd73e5a12fcc4dc72b643eab35
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Properly document the various APIs exposed by hci_driver.h.
Change-Id: Ic8daba4956e4c5d2cc6597556b55ab5221495ad7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are no users of this API and no (currently) envisioned use cases
for it. Remove it for now - it can always be brought back later if
there's a need for it.
Change-Id: I6530e096e3671c844a3f7dea8856147ffc716d71
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This was missing and all kernel objects belong to this group.
Change-Id: I3c31b168ca984b7d44cc5614a2e2bd5cc492cf50
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove the type field from the sensor value structure. All values will
have the type previously defined by SENSOR_VALUE_TYPE_INT_PLUS_MICRO.
This simplifies the interface, as apps will know what value type to
expect. Apps that prefer to use double values can optain them using the
sensor_value_to_double function.
Change-Id: I3588d74258030eb16c3f89d8eead13cca4606b18
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Similar to what was available with nano timers in the original kernel,
allow a user to associate opaque data with a timer.
Fix for ZEP-1558.
Change-Id: Ib8cf998b47988da27eba4ee5cd2658f90366b1e4
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
pulpino soc has custom-extended riscv ISA that is accounted
for if CONFIG_RISCV_GENERIC_TOOLCHAIN is not set.
(ex: bit manipulation asm opcodes)
Change-Id: I4dafc4ebc2fedcc4eb6a3dedd0412816afea6004
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
RISC-V is an open-source instruction set architecture.
Added support for the 32bit version of RISC-V to Zephyr.
1) exceptions/interrupts/faults are handled at the architecture
level via the __irq_wrapper handler. Context saving/restoring
of registers can be handled at both architecture and SOC levels.
If SOC-specific registers need to be saved, SOC level needs to
provide __soc_save_context and __soc_restore_context functions
that shall be accounted by the architecture level, when
corresponding config variable RISCV_SOC_CONTEXT_SAVE is set.
2) As RISC-V architecture does not provide a clear ISA specification
about interrupt handling, each RISC-V SOC handles it in its own
way. Hence, at the architecture level, the __irq_wrapper handler
expects the following functions to be provided by the SOC level:
__soc_is_irq: to check if the exception is the result of an
interrupt or not.
__soc_handle_irq: handle pending IRQ at SOC level (ex: clear
pending IRQ in SOC-specific IRQ register)
3) Thread/task scheduling, as well as IRQ offloading are handled via
the RISC-V system call ("ecall"), which is also handled via the
__irq_wrapper handler. The _Swap asm function just calls "ecall"
to generate an exception.
4) As there is no conventional way of handling CPU power save in
RISC-V, the default nano_cpu_idle and nano_cpu_atomic_idle
functions just unlock interrupts and return to the caller, without
issuing any CPU power saving instruction. Nonetheless, to allow
SOC-level to implement proper CPU power save, nano_cpu_idle and
nano_cpu_atomic_idle functions are defined as __weak
at the architecture level.
Change-Id: I980a161d0009f3f404ad22b226a6229fbb492389
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
This adds NET_REQUEST_BT_DISCONNECT which can be used to disconnect
IPSP in case it is connected.
Change-Id: I8da00b02ee08611bef5f4c0708936b2d31fd2a93
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds NET_REQUEST_BT_SCAN which can be used to scan peripherals
advertising IPSS UUID.
Change-Id: I2463079d182b4da080e6ef94d883c7c1e24a454c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Connect command can be used to initiate a connection, which in IPSP
terminology refer to a router role.
Change-Id: I12b9428924c88a9c68d3adbfe9016a0dd690aade
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
They should return the same value as in NET_MGMT_LAYER and
NET_MGMT_LAYER_CODE.
Change-Id: Ia95adcd3b6b6aaf0ed29f3260bc54784ca532d8f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When CONFIG_NET_MGMT_EVENT is not set, it will still be able to compile
code using net_mgmt_event related functions.
Change-Id: I6824c57093636867ea4228338aa6c02913975510
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
TCP didn't actually have a way to signal synchronous receipt of a FIN
packet. Extend the recv_cb API to allow a NULL buf argument with
status==0 (by analogy to Unix's zero-length read) to signal EOF.
Update docs too, and also echo_server which wasn't prepared to handle
this situation.
Change-Id: I7dc08f9e262a81dcad9c670c6471898889f0b05d
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The state of a net context is checked as a whole value (not individual
bits). Currently, the net_context_set_state function is adding the
passed in flags to the existing value. This is incorrect.
Change-Id: Ieba6b9dfc35537745b14c50a2ccb115c6976c001
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The cortex-m7 is an implementation of armv7-m. Adjust the Kconfig
support for cortex-m7 to reflect this and drop the unnecessary,
explicit, conditional compilation.
Change-Id: I6ec20e69c8c83c5a80b1f714506f7f9e295b15d5
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Precursor patches have arranged that conditional compilation hanging
on CONFIG_CPU_CORTEX_M3_M4 provides support for ARMv7-M, rename the
config variable to reflect this.
Change-Id: Ifa56e3c1c04505d061b2af3aec9d8b9e55b5853d
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Precursor patches have arranged all conditional compilation hanging on
CONFIG_CPU_CORTEX_M0_M0PLUS such that it actually represents support
for ARM ARMv6-M, rename the config variable to reflect this.
Change-Id: I553fcf3e606b350a9e823df31bac96636be1504f
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The ARM code base provides for three mutually exclusive ARM
architecture related conditional compilation choices. M0_M0PLUS,
M3_M4 and M7. Throughout the code base we have conditional
compilation gated around these three choices. Adjust the form of this
conditional compilation to adopt a uniform structure. The uniform
structure always selects code based on the definition of an
appropriate config option rather the the absence of a definition.
Removing the extensive use of #else ensures that when support for
other ARM architecture versions is added we get hard compilation
failures rather than attempting to compile inappropriate code for the
added architecture with unexpected runtime consequences.
Adopting this uniform structure makes it straight forward to replace
the adhoc CPU_CORTEX_M3_M4 and CPU_CORTEX_M0_M0PLUS configuration
variables with ones that directly represent the actual underlying ARM
architectures we provide support for. This change also paves the way
for folding adhoc conditional compilation related to CPU_CORTEX_M7
directly in support for ARMv7-M.
This change is mechanical in nature involving two transforms:
1)
#if !defined(CONFIG_CPU_CORTEX_M0_M0PLUS)
...
is transformed to:
#if defined(CONFIG_CPU_CORTEX_M0_M0PLUS)
#elif defined(CONFIG_CPU_CORTEX_M3_M4) || defined(CONFIG_CPU_CORTEX_M7)
...
2)
#if defined(CONFIG_CPU_CORTEX_M0_M0PLUS)
...
#else
...
#endif
is transformed to:
#if defined(CONFIG_CPU_CORTEX_M0_M0PLUS)
...
#elif defined(CONFIG_CPU_CORTEX_M3_M4) || defined(CONFIG_CPU_CORTEX_M7)
...
#else
#error Unknown ARM architecture
#endif
Change-Id: I7229029b174da3a8b3c6fb2eec63d776f1d11e24
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The cortex-m related memory map definitions in memory-map.h are all
CPU specific. In preparation for replacing
CONFIG_CPU_CORTEX_M0_M0PLUS with CONFIG_ARMV6_M and
CONFIG_CPU_CORTEX_M4_M4 with CONFIG_ARMV7_M, adjust memory_map.h
conditional compilation to hang on CONFIG_* variables for specific
cortex CPUs.
Change-Id: I2af0b75eaa5b16f88836dbdae41446beacaeba71
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
This trick was pioneered in Linux as the config_enabled() macro. The
madness has the effect of taking a macro value that may be defined to
"1" (e.g. CONFIG_MYFEATURE), or may not be defined at all and turning
it into a literal expression that can be used at "runtime". That is,
it works similarly to "defined(CONFIG_MYFEATURE)" does except that it
is an expansion that can exist in a standard expression and be seen by
the compiler and optimizer. Thus much #ifdef usage can be replaced
with cleaner expressions like:
if (IS_ENABLED(CONFIG_MYFEATURE))
myfeature_enable();
Change-Id: I40657d2aa3f802429ac33675a1fe245a5da86615
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The ICCM memory, when present, can be both written and read,
so changing the attributes to be read-write-execute.
Change-Id: I432bd36f4a6ef632b7c4ce3bf8aa138895d52642
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The main, idle, interrupt and workqueue call stack definitions are not available
to applications to call stack_analyze() on, but they often require to be
measured empirically to tune their sizes in particular applications and
use cases.
This exposes a new k_call_stacks_analyze() API call that allows the
application to measure the used call stack space for the 4
kernel-defined call stacks.
Additionally for the ARC architecture the FIRQ stack is also profiled.
Change-id: I0cde149c7366cb6c4bbe8f9b0ab1cc5b56a36ed9
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Remove legacy option and use SYS_CLOCK_EXISTS where appropriate.
Change-Id: I3d524ea2776e638683f0196c0cc342359d5d810f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Various sensor samples are hardwired to expect returned sensor values
are represented as doubles. In each case this assumption is incorrect.
Introduce a generic sensor_value to double helper function and adjust
the samples to use it.
Change-Id: I89c788686576562b84e07a36064640231340c33b
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
It is then possible to set the channel, pan_id and short address through
this API. Such features are mainly useful for testing purposes.
Change-Id: I41aeb397afdb231458a3b13638f3e13d3ac28a6c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fix some documentation issues found at the dns_client.h file.
Change-Id: I3c1138f55b182ad2507b2cc3a4a50dc874a0d730
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Changes applied by this patch:
- Add the mqtt_publisher_parser routine
- Add the MQTT_PACKET_TYPE macro to get the MQTT msg packet type
(required by mqtt_publisher_parser)
- Add the mqtt_linearize_buffer (required by mqtt_publisher_parser)
- Add the mqtt_recv callback for reception
- Modify the mqtt_init routine to install the reception callback
The mqtt_publisher_parser routine is a callback used internally
to execute the appropriate mqtt_rx routine. Only the following
messages are handled by this routine:
MQTT_CONNACK, MQTT_PUBACK, MQTT_PUBREC, MQTT_PUBCOMP and MQTT_PINGRESP.
On error, it executes the ctx->malformed cb, if defined.
This commit also introduces the mqtt_linearize_buffer routine that
will be used to linearize an IP stack fragmented buffer. This patch
makes use of the net_nbuf_linear_copy routine to linearize the
incoming buffer. mqtt_rx_xxxx routines are also updated to handle
linear buffers (no fragmentation).
Currently, all the network protocol routines assume that the input
buffer is not fragmented. Future versions will remove that assumption
and the mqtt_linearize_buffer routine will be removed as well.
Public MQTT API is not affected by this patch.
Change-Id: I02fece67052ffbc7cb393d5ca545c503da463c4b
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The reception cb: internal use only cb that will be set according to
the application profile: PUBLISHER, SUBSCRIBER, PUBLISHER & SUBSCRIBER
or SERVER.
Change-Id: Ib36b0686deb9220e507f9e468aae1b1191c35d31
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The mqtt_rx_publish is used to process incoming MQTT PUBLISH
messages. This routine performes the following steps:
- take ownership of the rx buffer containing the MQTT PUBLISH msg,
- call the MQTT parser routine, and
- determine, based on the incoming message's MQTT QoS,
the next action.
Change-Id: I3cc011cf0c280205161d0484f12a2cfa79fdf44a
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Some public function prototypes are missing, so this commit adds
them to the mqtt.h header.
Change-Id: I57a50ce346f086f55e499bfc8c815fd161a52f7b
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Use the appropriate data type for some variables:
- const input arguments
- int32_t instead of uint32_t for timeout
- uint8_t instead of int for variables that take just a few
possitive values.
Change-Id: Id7d762b400fa17e6751829ac401cd7c13aabb7b2
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit adds one routine previously found at the DNS resolver
library. The net_nbuf_linear_copy routine allows to "linearize"
an IP stack network buffer. This routine is required by functions
that must jump between big chunks of data that in this case may
lie between many fragments. Tracking fragments may be a tedious
task, so getting a linear copy of the buffer will reduce code
complexity altough it increases memory consumption.
The DNS client library is updated to reflect these changes.
Change-Id: Iae321f99fa9b05fae7e722b6d41baac427d82d7e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
If associated, this will request to disassociate from the PAN. That's
only client side, PAN coordinator can also disassociate a client, which
case is not handled here.
Change-Id: If308f51b62c5006b4a2db53d0c891e8192f3c198
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Active scan differs from passive scan by sending a Beacon request (thus
the "active" part) and wait for beacons in reply to it.
Taking the opportunity to add debugging output to scanning logic.
Change-Id: I85001b1ea17f4ec4cd315dc39524c4d8f053cee2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Such management request will enable association the 15.4 device to an
existing PAN.
Change-Id: I61ffd5e4d8192716e067c5225b3327f08944063b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Currently, as only CC2520 device is supported: it will loop over the 16
channels present in 2.4Ghz spectrum. However, this will need refinement
as soon as other spectrums will be in use: L2 layer could request
capabilites from the device in order to know which range to use.
Scan result is done one at a time for now. It's unlikely going to fit
all production use case, so it's going to change in the future.
Change-Id: I2fafec49eb5cbfca1a4f04107ba3b6511d7d956d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It can be thus used to track the status of network interfaces in order
to act accordingly (no need to try sending things on network if the
interface is down for instance).
Change-Id: Ie160ef0dfdad6679d531d05a7abada96ad1de7db
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This adds enable callback which can be used to notify the L2 driver about
changes of interface state, the L2 driver can then check if the new state
is allowed and reject otherwise.
Change-Id: I4bb6b1e32be2633f24694c0246585f803f8c645d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds NET_IF_UP flag support indicating the interface is up,
currently this shall only be used internally by the driver, later on it
shall be possible to make it public by using dedicated functions.
Change-Id: I38090da4030395b2341733b846004789416d61c1
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This basically implements timer for connection and disconnection.
Conn timer will be started when dlc is initialized and stopped
when it is connected. Authentication if any, will be also included
in this timer.
Disc timer will be started during disconnect initiation.
Change-Id: Ia4b74e478fefa42db21aef528e623a24c72ddf7f
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
User may want to know when getting called user UUID callback handler
on what UUID the result data was retrieved from server.
Jira: ZEP-1112
Change-Id: Iabb2dbdf0f3cfdb24244e052f094c7549164b199
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Since callers of bt_recv() have so far anyway been required to know in
which context to call it (based on e.g. bt_hci_evt_is_prio) it's
cleaner to have two separate APIs: bt_recv and bt_recv_prio.
Change-Id: Icd0d9aed9c51ffd2def31432c4ffcc16a9f13ccd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The separate ACL & event pools will soon be removed, and it's already
now convenient to have a generic API when the exact type of the
incoming packet is not yet known.
Change-Id: I84cb65d17ea69ebeaeb21532fbf76689e4fb59a0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The controller doesn't support this feature and the only driver that
was needing it (h4.c) will be converted not to rely on it in the next
patch.
Change-Id: Ia514b79b6d05aa128768c2355353b7797e8b8977
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add support for using the context bt_recv() is called in as the RX
thread, rather than having a separate host-side RX thread.
Change-Id: I256bfe5dece5272c816f2292e58747553189963d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If the controller doesn't need ACL host flow control it may want to
optimize and use a single pool for incoming data.
Change-Id: Iec2a69bd2d7a127c7329d0423ab5ce6b73cb9904
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This option has not been used so far and will only contribute
unnecessary complexity in subsequent patches that introduce a concept
of combined RX buffers.
Change-Id: I53e0ce5155eebc352b84ba41b30ecb9d9958699f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This analyzes the dlc stack using stack_analyze() which is coming
as 188 with BLUETOOTH_DEBUG_LOG off.
dlc stack (real size 320): unused 68 usage 188 / 256 (73 %)
So increase the stack size to 256.
Change-Id: Ie5d5f267f4f618747551f0bfd0e05ffb47e0bb91
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
The Cortex-M0(+) and in general processors that support only the ARMv6-M
instruction set have a reduced set of registers and fields compared to
the ARMv7-M compliant processors.
This change goes through all core registers and disables or removes
everything that is not part of the ARMv6-M architecture when compiling
for Cortex-M0.
Jira: ZEP-1497
Change-id: I13e2637bb730e69d02f2a5ee687038dc69ad28a8
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The Cortex-M0(+) and in general processors that support only the ARMv6-M
instruction set can only access the NVIC_IPRn registers with word
accesses, and not with byte ones like the Cortex-M3 and onwards. This
patch addresses the issue by modifying the way that _NvicIrqPrioSet()
writes to the IPRn register, using a word access for Cortex-M0(+).
A similar issue is addressed for internal exceptions, this time for the
SHPR registers that are accessed differently on ARMv6-M.
Reference code taken from CMSIS.
Jira: ZEP-1497
Change-id: I08e1bf60b3b70579b42f4ab926ee835c18bb65bb
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since the value is treated as uint8_t internally anyway, just use
uint8_t for the input and output parameter types.
Jira: ZEP-1497
Change-Id: I61d68eb39cba5d82dad6ab7593b267c26e003d2b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Let's make net stack having its own level of debugging through sys_log.
It replaces NET_DEBUG by NET_LOG_ENABLED, which is then semantically
better: someone wanting to log the errors might want that not only for
debugging.
Along with it, CONFIG_NET_LOG_GLOBAL option is added, in order to enable
all available logging in network stack. It is disabled by default but
might be found useful when warning/errors need to be logged, so it is
then unnecessary to selectively enable by hand all CONFIG_NET_DEBUG_*
options.
It is possible, locally, to override CONFIG_SYS_LOG_NET_LEVEL by setting
the level one want to NET_SYS_LOG_LEVEL. This can be useful on samples
or tests.
Change-Id: I56a8f052340bc3a932229963cc69b39912093b88
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's possible to know from which pool the nbuf comes from so
let's reduce nbuf size by removing its internal type attribute which
becomes then useless.
When a data buffer is not coming from nbuf data buffer pool, let's call
it "EXTERNAL", just to make debugging handling a little simple in the
code.
Change-Id: I6931394c8c4f594137f6380be0a0ba5cea371040
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
User application can request the information it wants via the generic
net_mgmt() call, following the NET_REQUEST_STATS_* codes.
Change-Id: Ia9e7d318cf11b7bf8bfaf1ad63c8c985be846cc1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will be useful for net mgmt based API to grab statistics.
Change-Id: Id3904c48cfdd6c6fb01b6919948eb13af826ca1e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will help to track only what's wanted (ipv6, tpc, udp, else...) if
needed to.
Change-Id: I5c2e5e582db629b5d0e1cd98004f693c50f532a4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's change from macros to inlined function to make things nicer.
Change-Id: Ie98e0667613961b03c84ca60bc551d0f473765f6
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It will be thus possible to enable only the error logging, or the other
sys_log levels.
Change-Id: I0c0ed789f7cfbb4811320e8f8249151288274873
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This moves the shell component into its own subsys and groups all
related files and options into a single place.
Additionally, one Kconfig option will now be required to enable the
shell:
CONFIG_CONSOLE_SHELL=y
The header files was also moved to include/shell/shell.h and can be now
referenced with
#include <shell/shell.h>
instead of
#include <misc/shell.h>
Updated documentation as well.
Change-Id: Iffbba4acfa05408055e9fd28dffa213451351f94
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introduce random device API analgous to other device driver classes in
Zephyr. Modify the the KSDK random driver to implement the API.
We retain the sys_rand32_get() interface for now on the assumption it
will eventually relocate to or be otherwise replaced by an entropy
management system.
The existing TEST_RANDOM_GENERATOR related drivers that do not
generate entropy are not modified to expose this driver API since they
cannot generate entropy.
Change-Id: I60b2d5afddf242e802a1d9014c99579870fb7472
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
A very common pattern in code goes something like the following:
memcpy(net_buf_add(buf, len), data, len);
To avoid having to create this kind of complex constructions every
time, this patch adds a new API which simplifies the call:
net_buf_add_mem(buf, data, len);
Change-Id: Ic1aeae4baf88b2295d139f672d5d265db2ddbe7b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
One missing ARG_UNUSED is added by this commit.
Change-Id: I4d9275cd7de4675a960adc67018633dcf8bdc034
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Makes possible to append user UUID to context to be able later iterate
it on subsequent resolving process.
Jira: ZEP-1112
Change-Id: I193ff1cee199045c9686dc4ca200adf19db377e4
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
The buf.h header file is a more natural place for these than the
hci_driver.h file.
Change-Id: I1eedcf03ae6ffa374403b382ec665ae554d6847b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Not all users are in an ISR context where we can't block, so give the
callers the freedom to choose if they want to block or not.
Jira: ZEP-1481
Change-Id: I19bd7e2df94c4eeb60886a17a78f872bd7bea887
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If more inquiry results were received during discovery than fits in
storage results with lowest RSSI will be skipped. This is to improve
API usefulness in busy environments where results with low RSSI (likely
more far away than high RSSI) could consume provided result space,
Change-Id: I1e9ca901b693f608d58575916809e8bd8bfe710f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If an attribute has no special access permissions (e.g. it's
notify-only) it would set the permissions to 0. Having a dedicated
enum value for this makes the code a bit more readable.
Change-Id: I0d3d8716a2544379353148735ba29b1a137f7173
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some tick frequencies lend themselves to optimized conversions from ms
to ticks and vice-versa.
- 1000Hz which does not need any conversion
- 500Hz, 250Hz, 125Hz where the division/multiplication are a straight
shift since they are power-of-two factors of 1000.
In addition, some more generally used values are made to use optimized
conversion equations rather than the generic one that uses 64-bit math,
and often results in calling compiler intrinsics.
These values are: 100Hz, 50Hz, 25Hz, 20Hz, 10Hz, 1Hz (the last one used
in some testing).
Avoiding the 64-bit math intrisics has the additional benefit, in
addition to increased performance, of using a significant lower amount
of stack space: 52 bytes on ARM Cortex-M and 80 bytes on x86.
Change-Id: I080eb338a2637d6b1c6838c119af1a9fa37fe869
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Like ceil() for real numbers, but for fractions.
Change-Id: I8387732a2b2fd8b5c2bed57a78726eab7cea2c5b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Introduce tap and double tap triggers to the sensor interface.
Change-Id: Ic91d73e4393d643abc4119850d5b02164b1b6843
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Document that when passing NULL to k_free, nothing happens.
Jira: ZEP-1475
Change-Id: I0efab2c8c670b0cebfd3e72aa8cd64857798abea
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This patch adds the ARG_UNUSED macros to some function arguments
to avoid compiler warnings.
Change-Id: Iae2cd3018c9442ffa9268fdfd33eb9a21f55087c
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit adds the ARG_UNUSED macro to some function arguments
to avoid compiler warnings when some sections are compiled out.
Change-Id: Ic003c5a6b2757112cbcf9111fceb14c0f8ea352a
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Use size_t instead of int to avoid the following compiler warning:
warning: comparison between signed and unsigned integer expressions
Change-Id: I1dcd275e685f5c35793bdbf5ba0acc28ae4b181c
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Use a short name for this option CONFIG_OBJECT_TRACING.
Change-Id: Id27de7ef9ca299492b6b7d2324d9f5bcf8059a31
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move logging out of misc/ to its own subsystem. Anything related to
logging and any new logging features or backends could be added here
instead of the generic location in misc/ which is overcrowded with
options that are not related to eachother.
Jira: ZEP-1467
Change-Id: If6a3ea625c3a3562a7a61a0ba5fd7e6ca75518ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
That module is not used anymore: it was introduced pre-Zephyr to add
some kind of awareness when debugging ARM Cortex-M3 code with GDB but
was never really used by anyone. It has bitrotted, and with the recent
move of the tTCS and tNANO data structures to common _kernel and
k_thread, it does not even compile anymore.
Jira: ZEP-1284, ZEP-951
Change-Id: Ic9afed00f4229324fe5d2aa97dc6f1c935953244
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Minimal frame size is 60 bytes, but IP frame might be smaller than this
size minus the ethernet header. In that case, Ethernet frames are padded
so it does reach this minimal size. In this case, ethernet L2 should
update the buffer list so it remove the padding length from the whole.
Change-Id: Id370cad09ad82bb54febeb60b05f7e430cc8f963
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This patch introduces a k_sem that will block until:
- data is received, or
- the user-provided timeout expires
This change allows us to simplify our previous DNS client
implementation.
This change is related to ZEP-1357 because we are refactoring the
DNS client API removing the continuous update of the net_context_recv
routine that seems to be causing issues after the kernel's update.
Jira: ZEP-1357
Change-Id: If01c9274ac8f096f0095a2872f86be2e007212ee
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit introduces the dns_context structure.
This new structure will reduce stack overhead due to
the simplication of the dns_resolve routine signature.
Furthermore, the timeout parameter is now int32_t
instead of uint32_t.
The dns sample application is also updated.
Change-Id: I5d789656bacbd23c4654edce5d116a88dc42c354
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
TinyDTLS is gone, so in this patch we are removing the tinydtls.h
header.
Change-Id: I7deddc554ac5c2fc952565a2df2e4c46e7cd2f6e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
RFCOMM channel range is 1 - 30, 0 and 31 shall not be used since
the corresponding DLCIs are reserved in GSM.
Change-Id: I63ff188e06007208b629a3e3bc22681c0bad239b
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
For very constrained systems, like bootloaders.
Only the main thread is available, so a main() function must be
provided. Kernel objects where pending is in play will not behave as
expected, since the main thread cannot pend, it being the only thread in
the system. Usage of objects should be limited to using K_NO_WAIT as the
timeout parameter, effectively polling on the object.
Change-Id: Iae0261daa98bff388dc482797cde69f94e2e95cc
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
nano_cpu_idle/nano_cpu_atomic_idle were not ported to the unified
kernel, and only the old APIs were available. There was no real impact
since, in the unified kernel, only the idle thread should really be
doing power management. However, with a single-threaded kernel, these
functions can be useful again.
The kernel internals now make use of these APIs instead of the legacy
ones.
Change-Id: Ie8a6396ba378d3ddda27b8dd32fa4711bf53eb36
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Not a functional bug per-se since they resolve to the same thing, but a
conceptual error nonetheless.
Change-Id: Ia11f6bd272cabe8da21d59e3378b8348f034e814
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Use _INACTIVE instead of hardcoding -1.
_EXPIRED is defined as -2 and will be used for an improvement so that
interrupts are not locked for a non-deterministic amount of time while
handling expired timeouts.
_abort_timeout/_abort_thread_timeout return _INACTIVE instead of -1 if
the timeout has already been disabled.
Change-Id: If99226ff316a62c27b2a2e4e874388c3c44a8aeb
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The Cortex-M3/4 kernel was reserving priorities 0 and 1 for itself, but
was not registering any exception on priority 0. Only reserve priority 0
and use it for SVC and fault exceptions instead of priority 1.
Change-Id: Iff2405e27fd4bed4e49ab90ec2ae984f2c0a83a6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
There are now three flags that decide how many priorities are reserved
by the kernel, each one requiring one priority level: Zero Latency
Interrupts, BASEPRI locking (for SVC usage) and faults that are not at
priority -1, so that taking them in an ISR actually triggers the fault
synchronously.
Change-Id: I7f4d760c9110051aeb82dcfd8cd68026a9b74b54
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This allows using it in _EXC_PRIO() instead of hardcoding 2 and 3.
Change-Id: I3549be54602643e06823ba63beb6a6992f39f776
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This is a left-over that should have been renamed to the new
net_buf_alloc_debug function name.
Change-Id: Iefcbd2eefab5614b1b80214cb0927f3db77d592e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When going into DEEP_SLEEP state, the ARC timer
needs to be restored.
This implements the function to restore the timer
after sleep.
As the time spent during sleep is not currently known,
the timer is expired to reschedule the application task.
Jira: ZEP-1224
Change-Id: I22a30d0fd79f177cf166b9a29dc78d68f7d7fbad
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Move interrupt initialization for the ARC to its own
device. The init function for the arc will be only
doing platform specific operations
Jira: ZEP-1288
Change-Id: Icb04c3622890021c65cd24cecf6cafee6c37caf9
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Following commit fc21a76db6
Some more fixes are needed.
Change-Id: I19c2c979d44be5edfd76041d3cf4507860795c78
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Using a LIFO instead of a FIFO has the potential benefit that more
recently in-use buffers may be "cache-hot" and therefore accessed
faster than least recently used (which is what we get with a FIFO).
Change-Id: I59bb083ca2e00d0d404406540f7db216742a27cf
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since the user data size is now stored in the pool there's very little
value in storing it as well per-buffer.
Change-Id: I17a99123b232423c52a2179b4eccd813728d51b1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In order to keep the initialization process light-weight, remove
net_buf_pool_init() and instead perform the initialization of the pool
and buffers in a "lazy" manner. This means storing more information
in the pool, and removing any 'const' members from net_buf. Since
there are no more const members in net_buf the buffer array can be
declared with __noinit, which further reduces initialization overhead.
Change-Id: Ia126af101c2727c130651b697dcba99d159a1c76
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is only for use with custom destroy callbacks, so that the
application gets isolated away from the details of how exactly the
buffers are managed. This opens up the possibility of switching away
from k_fifo to potentially better solutions, such as k_lifo.
Change-Id: I0d8322fdec3500d8ae060ae471b9448aeaa4572a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove SENSOR_VALUE_TYPE_INT as it is the same as
SENSOR_VALUE_TYPE_INT_PLUS_MICRO with val2 set to 0.
Change-Id: If5a9c579b7267701c27f40fd887acae47d64edc5
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Remove SENSOR_VALUE_TYPE_Q16_16 as it is not used by any driver. Future
drivers can use any of the remaining value types.
Change-Id: I984143cc65d6a6fd0477f310ac17c62498cc05b8
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Until now it has been necessary to separately define a k_fifo and
an array of buffers when creating net_buf pools. This has been a bit
of an inconvenience as well as blurred the line of what exactly
constitutes the "pool".
This patch removes the NET_BUF_POOL() macro and replaces it with a
NET_BUF_POOL_DEFINE() macro that internally expands into the buffer
array and new net_buf_pool struct with a given name:
NET_BUF_POOL_DEFINE(pool_name, ...);
Having a dedicated context struct for the pool has the added benefit
that we can start moving there net_buf members that have the same
value for all buffers from the same pool. The first such member that
gets moved is the destroy callback, thus shrinking net_buf by four
bytes. Another potential candidate is the user_data_size, however
right not that's left out since it would just leave 2 bytes of padding
in net_buf (i.e. not influence its size). Another common value is
buf->size, however that one is also used by net_buf_simple and can
therefore not be moved.
This patch also splits getting buffers from a FIFO and allocating a
new buffer from a pool into two separate APIs: net_buf_get and
net_buf_alloc, thus simplifying the APIs and their usage. There is no
separate 'reserve_head' parameter anymore when allocating, rather the
user is expected to call net_buf_reserve() afterwards if something
else than 0 headroom is desired.
Change-Id: Id91b1e5c2be2deb1274dde47f5edebfe29af383a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Last argument for k_stack_init is of time int resulting in UINT_MAX
being converted to negative value. Instead of UINT_MAX use maximum
possible number of entires that won't result in stack->base and
stack->top overflow.
Change-Id: I8470f6dd18abcccc72590e07e0d0efd4ce2208cc
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Hamming Weight or "popcount" consists in counting the number of bits set
to 1 in a particular word. This commit adds a macro to be able to use
the existing builtin for this purpose with the GCC compiler.
Change-Id: Iec64c19e897de2bc02e981071465bbe230ee9add
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The ARG_UNUSED macro is added to avoid compiler warnings.
Change-Id: If14c3928a30c8f3156cdcd0fe11e22407a78c088
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Applications may want to know how much time is left until a delayed
work gets scheduled. To prevent applications from having to track this
themselves simply use the information that's already embedded as part
of the timer that's part of the delayed work struct.
Change-Id: I189df2f3be8b207e68b554a0cbb4f97f1a99de22
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Factor out the code for evaluating the remaining time for _timeout
structs so that it can also be used for other objects besides k_timer
structs (like k_delayed_work, coming in a subsequent patch).
Change-Id: I243a7b29fb2831f06e95086a31f0d3a6c37dad67
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Device_sync_call related APIs and typedef are actually wrappers
for kernel semaphores. These APIs and typedef will be
deprecated. Let's add deprecated attribute to give deprecation
warning.
Jira: ZEP-1411
Change-Id: Ia07557cc81bd9ee8e41f2e17be4607c4bd6d23bd
Signed-off-by: baohong Liu <baohong.liu@intel.com>
Use the SYS_INIT() mechanism to invoke the sys_rand32_init() function
in random drivers that require an initializer. Remove all empty
sys_rand32_init() instances.
The existing explicit sys_rand32_init() function runs immediately after
PRE_KERNEL_2 before stack canaries are initialized. In order to get
equivalent behaviour with sys_rand32_init() we set SYS_INIT() to
initialize the random drivers at the lowest priority of PRE_KERNEL_2.
Change-Id: I4521e44daac806bc4eef01ce7fdf2ba5367e0587
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
There are some corner cases where direct access to the formatter
function is needed. Export _vprintk() so code can use it in a similar
way that _prf() can be directly used.
Change-Id: I9dfb68f87f310e900c662dc8beb320bb4ff7d8b2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
After some more careful measurements, the worst measured overhead is
288 bytes. Adjust BT_STACK_DEBUG_EXTRA correspondingly to 300 (to give
a bit of playroom still on top of this).
Change-Id: Icdf477b05b40917027314b180c2b69c8c6c759b3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
BT_STACK_DEBUG_EXTRA was adjusted by commit 047c6eacf7,
however it failed to cover this #ifdef section in log.h.
Change-Id: I1a9cd81dc25e9465daba62f0116b2661ac047362
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This will be used by the user to disconnect or cancel connect dlc.
This also defines an internal close function which will take
appropriate action based on the dlc state.
In case of user initiated disconnection if some pending packets are
there in queue then it has to be sent before sending DISC packet.
< ACL Data TX: Handle 256 flags 0x00 dlen 8
Channel: 64 len 4 [PSM 3 mode 0] {chan 0}
RFCOMM: Disconnect (DISC) (0x43)
Address: 0x2b cr 1 dlci 0x0a
Control: 0x53 poll/final 1
Length: 0
FCS: 0x6d
> ACL Data RX: Handle 256 flags 0x02 dlen 8
Channel: 64 len 4 [PSM 3 mode 0] {chan 0}
RFCOMM: Unnumbered Ack (UA) (0x63)
Address: 0x29 cr 0 dlci 0x0a
Control: 0x73 poll/final 1
Length: 0
FCS: 0x26
Change-Id: Ie4fa3bd8f6b279fee6fb56ddce198d82c5047849
Signed-off-by: Jaganath Kanakkassery <jaganathx.kanakkassery@intel.com>
Now that printk is the default backend for logging the overhead is not
as bad as with printf. 160 seems to be roughly the worst case amount
of overhead that debug logs now cause.
Change-Id: Ia5937b7318e00cc31c72fa1702c73a57bca0603a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of %2.2x we should use %02x since printk doesn't (currently)
support the former.
Change-Id: I773972e63071b81c95c65de292f12ab14d7c310b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's now snprintk available that's more light-weight on the stack
than snprintf.
Change-Id: I6b3e4409703ca92fe6b8f4146ff47c490ab826cb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Applications may want finer control of the NRPA used for
non-connectable beacons, and provide it up-front rather than letting
the stack generate one.
Change-Id: I84d459372cc85ed09a8f9cde16dbb9b98dec2a43
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Expose helpers in hci.h for setting and getting the LE random address
type.
Change-Id: I7c6437051f0b2d1f5f79e19b2616bb643ae6300b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Having the logging macros arbitrarily mapping to printk or printf
based on selected Kconfig options that the app isn't necessarily aware
of can have unexpeced (bad) side effects. In particular, printf
consumes *a lot* more stack (closer to 512 bytes) than printk, so
enabling a seemingly innocent CONFIG_STDOUT_CONSOLE option could lead
to stack overflows that are hard to debug.
Jira: ZEP-1419
Change-Id: I5fd77a7ed402e9ca67af23857e0f886f96d243bc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds the clock_control implementation for the ARM LTD
Beetle platform.
The main features enabled are:
* Clock on and off in ACTIVE, SLEEP and DEEPSLEEP mode.
* PLL support (freq: 12, 36, 48 Mhz).
The integration with the existing drivers will be done in future
patches.
Jira: ZEP-1300
Change-Id: I07cb2325275bd86a036e8e24aeb7bbf2c6176a93
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Add the clock driver for the STM32L4 series.
Change-Id: Icdf79061f163d8d00187b382d1564422fb875c5b
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
These correspond to the libc snprintf and vsnprintf APIs.
Change-Id: If3944972ed95934a4967756593bb2932c3359b72
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Pass a parsing context around, allowing counting the number of
characters written, which is then returned in the return value of
printk(). This makes printk more similar to printf and prepares the
way to extend the implementation to support printing to strings.
Change-Id: Ib28a18a4f36fc58b98b228fd5763b2c05f5af7bc
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Drop the unnecessary trailing whitespace formatting in inline asm.
Change-Id: I351df91b7175fe21d268d325865838b4840def8d
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Replace the use of a hardwired temporary register in the irq_lock()
implementation with a local variable. This will allow the compiler
more flexibility in register allocation.
Change-Id: Ifbdb52fca1d40404d55934343ac2a8153df7e1a8
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The cortex-m4 irq_lock() implementation uses a movs instruction, thus
clobbering the condition code, but does not include the clobber in the
asm clobber list. This is a bug in the situation where the compiler
schedules a live condition code over the inline lock instructions.
Since the irq_lock() implementation does not need to kill the CC we
simply switch to mov from movs.
Take the opportunity to drop the unnecessay .n and let the assembler
choose an appropriate encoding.
This fixes a bug found by inspection, it has not actually been
observed in real code.
Change-Id: Id60fa3362df9d4bf05c3d5e23066410ede92d73c
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Memory accesses could be reordered before an irq_lock() or
after an irq_unlock() without the memory barriers.
See commit 15bc537712 for the
ARM fix for a complete description of the issue and fix.
Change-Id: I1d96fe0088d90150f0888c2893d017155fc0a0a7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Memory accesses could be reordered before an irq_lock() or after an
irq_unlock() without the memory barriers.
See commit 15bc537712 for the ARM fix for
a complete description of the issue and fix.
Change-Id: I056afb0406cabe0e1ce2612904e727ccce5f6308
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Memory accesses could be reordered before an irq_lock() or after an
irq_unlock() without the memory barriers.
See commit 15bc537712 for the ARM fix for
a complete description of the issue and fix.
Change-Id: Ic92a6b33f62a938d2252d68eccc55a5fb07c9114
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Add the missing memory clobber to irq_unlock() in order to prevent the
compiler reordering memory operations over the unlock.
Change-Id: If1d664079796618ed247ff5b33b8b3f85fb7e680
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The inline asm definition of irq_lock() on the ARM architecture marks
the ASM as volatile which prevents the compiler from removing the
isntruction but does provide any information to the compiler to
prevent the inline ASM instruction being re-ordered relative to other
instructions. The instruction used in irq_lock() do not touch memory,
however in order to acheive their intended purpose they must be
ordered relative to other memory access instruction. This is acheived
by adding the "memory" clobber.
Instances of the compiler inappropriately re-ordering irq_lock() calls
relative to other instructions without this patch can be observed in
the code generated for k_sleep() on NRF51 target boards.
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Change-Id: I9d42d54cd9a50e8150c10ce6715af7ca2f5cfe51
Currently it's only possible to configure those GPIOs through
boards.<h/c> files and thus it's not relevant for board that do not
embed cc2520 but might get one wired to it, unlike
quark_se_c1000_devboard which directly embeds one cc2520.
Change-Id: I819bc1d2de707ea12eb70dc60a40b28f92666e51
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This commit adds HTTP message handling support for Zephyr.
So, no network routines are involved at this level.
To add HTTP message handling support for Zephyr, we explored the
following options:
1. Importing an external project and perhaps adapting it to fit our
requirements.
The criteria to pick one codebase among all the available projects
are: licensing, correctness and performance.
2. Writing our own implementation from scratch.
We decided to import an external project instead of implementing our
own parser, mainly due to code maturity and correctness. It could take
more time to obtain a production-ready parser from scratch than adapting
a state-of-art library.
The following is a list of some projects offering similar functionality.
lighttpd (many files)
* License: revised BSD license
* Supported: active
* Comments: this parser can't be integrated to Zephyr due to
dependencies that currently are not satisficed by our SDK.
nginx (src/http/ngx_http_parse.c)
* License: 2-clause BSD-like
* Supported: very active
* Comments: this parser can't be integrated to Zephyr due to
dependencies that currently are not satisficed by our SDK.
wget (src/http-parse.c)
* License: GPL 3.0
* Supported: very active
* Comments: this code can't be included in Zephyr due to
licensing issues
curl (lib/http.c)
* License: MIT/X derivate, see:
https://curl.haxx.se/docs/copyright.html
* Supported: very active
* Comment: it must be forked and adapted to run in Zephyr.
It is not optimized for low-power devices.
nodejs http-parser (http_parser.c)
* License: nginx license (2-clause BSD-like) and MIT license
* Supported: very active
* Comments: optimized with performance in mind.
From https://github.com/nodejs/http-parser: "It does
not make any syscalls nor allocations, it does not buffer data,
it can be interrupted at anytime. It only requires about 40
bytes of data per message stream."
So, nodejs/http-parser looks a very good choice for Zephyr. In this
commit, we integrate nodejs' parser to Zephyr.
Origin: https://github.com/nodejs/http-parser/releases/tag/v2.7.1https://github.com/nodejs/http-parser/archive/v2.7.1.tar.gz
NOTE:
This patch reformats the http_parser files to reduce checkpatch
warnings. Changes made in this refactoring are available at:
Repo: https://gitlab.com/santes/http_parser/commits/refactoring1
Commit: 9ccfaa23f1c8438855211fa902ec8e7236b702b1
Jira: ZEP-346
Jira: ZEP-776
Change-Id: I29b1d47f323a5841cd4d0a2afbc2cc83a0f576f0
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Create a variable in nbuf metadata area for storing TCP
buf_sent information.
Change-Id: I21a85c58183f1e4997d03d4a93546ddd9b32e977
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Hook up TCP transmission through the net_context_send() API. Queues
packets via a list in the net_buf header, but as of right now simply
transmits the queue synchronously, ignoring the need for retransmit
and the limits of the receive window on the other side.
Requires that the ACK transmission be moved ahead of the net_context
callback invokation. This to work around a glitch in the way ACKs
work with queueing (they depend on current state, but packets are
assembled just once) that will be fixed in a coming patch.
Change-Id: I7490333e4b314e7734fcc03f2a63d76ae89d698a
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The cc2520 driver RX thread did not like the stack information
collection macros defined in net_core.h. Both the cc2520 TX and
RX got the same variable name which did not compile.
This is now changed so that the first parameter is added to
the variable name to create a unique variable.
Change-Id: Ia41d01a71afd73af2ef31aa5f7a890a3cf0385aa
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the native IP stack is now the default, there is no need
for corresponding Kconfig option.
Change-Id: I08e4992f540f928a2b7378e8803e634e38725348
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit removes the legacy Contiki based uIP stack.
The new native IP stack must be used after this commit.
The commit also removes following things:
- legacy cc2520 driver
- legacy ethernet drivers
- legacy IP stack samples
and changes these things:
- disabled tests that only work for legacy IP stack
- select new IP stack by default
- enable random number generator by default as it is needed
by the new IP stack
Change-Id: I1229f9960a4c6654e9ccc6dac14a7efb9394e45d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is to be used in net-shell to view currently
available network connections.
Change-Id: Iadb6555ed6db4e8fb0639e6d0dcf1eccd970acca
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If IP stack offloading is enabled, then call corresponding
L2 driver when corresponding net_context API function is
called. The L2 driver can then do its magic to send/recv
IP packet or do what ever with it.
Change-Id: I26695cee6feb80a41923db0165f22d94477333be
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This code is inspired by a similar feature found in ccan[1],
that enforces that the parameter passed to ARRAY_SIZE() is
always an array and not a generic pointer. This is a slightly modified
version that will work if the macro is expanded outside of a function
body.
The check is performed by comparing if typeof(array) and
typeof(&array[0]) are of a different type. Due to the way arrays
decays to pointers in C, if one passes a pointer, the types won't be
compatible and a compile time assertion will fail.
No bugs have been found with this change, but since there's no runtime
or size overheads, there's no reason to not enable it.
[1] https://github.com/rustyrussell/ccan/blob/master/ccan/array_size/\
array_size.h
Change-Id: I6c321714d0024298e593176be43b2d0b5362cc0d
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
This macro does two things: first, it validates that the pointer is not
NULL. Second, it validates if it's between the first and the last
element in the array.
This is useful for cases where a pool of structures are used, such as
in the network subsystem.
Change-Id: I9d815936e31d87a3b3ff80466eea97bc4ad954b5
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The macro defines the stack as usual, but if user has
enabled net shell (CONFIG_NET_SHELL), then additional
information about the stack is stored in net_shell
linker section. The information in the net_shell linker
section is then used to print information about the
stacks in the networking sub-system.
Change-Id: Ic6e9f16a73a192b9a59d32a6d0070322382f98bd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The original version can fail in ARM like this
***** USAGE FAULT *****
Executing thread ID (thread): 0x200027a8
Faulting instruction address: 0x00008080
Unaligned memory access
Fatal fault in thread 0x200027a8! Aborting.
so use UNALIGNED_PUT() and UNALIGNED_GET() instead.
This failure was seen when IPv6 address was
copied to neighbor cache in ipv6.c:nbr_new().
Change-Id: I638424b9a95c451e13314ca9182c39ab8aa71830
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If CONFIG_INIT_STACKS is not enabled but CONFIG_NET_SHELL is,
then net_analyze_stack_get_values() was not properly compiled
out which caused unknown function call.
Change-Id: I18de5ec0b5d6ab7876e801c83b82c9dd5bf22093
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds the MQTT high-level API with Quality-of-Service
support. The following MQTT messages are covered by this commit:
CONNECT (tx), DISCONNECT (tx), PUBACK (tx, rx), PUBCOMP (tx, rx),
PUBREC (tx, rx), PUBREL (tx, rx), PUBLISH (tx), PINGREQ (tx),
SUBSCRIBE (tx), UNSUBSCRIBE (tx), CONNACK (rx), PINGRESP (rx),
SUBACK (rx) and UNSUBACK (rx).
Where 'tx' stands for transmission: routines that create and send
messages. 'rx' stands for reception: routines that receive an RX
buffer from the IP stack and parse the MQTT mesage contained in
that buffer.
Jira: ZEP-365
Jira: ZEP-591
Jira: ZEP-856
Change-Id: Ibee701a298127eb713aa3fde5aaf7d089ecd1b9d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Updating the API documentation to use K_NO_WAIT instead of 0.
Change-Id: I10ba31fe116210443f383b343993c3cca830a7c2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Dropping legacy API. This commit also contains updated
unit tests in order to pass the test.
Change-Id: Ibc7426837e2f4f23bb5f3ed3719635c5c3d0ed0f
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
