Change function parameter name in function usbd_device_set_code_triple
from `class` to `base_class` as `class` is a keyword in C++.
Signed-off-by: Shane Snover <ssnover95@gmail.com>
Let's always enable the native_posix backend even
if the serial is used.
Both can be used at the same time, and:
a) users expect the logger output in the invoking shell even if they
enable the UART
b) Since printk is routed to the logger twister actually needs it
for tests to pass as for native platforms it looks into the stdout
of the process.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Previously, if an SD I/O operation was attempted while another thread
held the mutex for the SD card, the I/O operation would simply fail. Add
a timeout to k_mutex_lock calls within the SD subsystem, so that
multithreaded access to the SD card instead blocks until the SD card is
available for I/O
Fixes#66211
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add a function callback that is called when the TCP connection
is closed. This is only available if doing network tests.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The FIN timer was not set when we entered the FIN_WAIT_1 state.
This could cause issues if we did not receive proper packets
from peer. With this fix, the connection is always terminated
even if peer does not respond.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If we are in a passive close state, then it is possible that
the ack we are waiting is lost or we do not accept the one peer
sent to us because of some earlier out of memory issue.
So install a timer (using by default the FIN timer value) to
close the connection if the last ack is not received on time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
PBP API allows sources to create a Public Broadcast Announcement.
PBP API to parse a Public Broadcast Announcement.
public_broadcast_source application starts extended advertising and
includes a Public Broadcast Announcement. The advertised broadcast
audio stream quality will cycle between high and standard quality.
public_broadcast_sink application scans for broadcast sources and
synchronizes to the first found source which defines a Public Broadcast
Announcement including a High Quality Public Broadcast Audio Stream
configuration.
Add bsim tests for Public Broadcast Profile APIs.
Add shell implementation for Public Broadcast Profile APIs.
Signed-off-by: Daniela Andreea Dumitrache <danielaandreea.dumitrache@nxp.com>
- Support for listing both testcases and testsuites
- Support for running single suites or single test cases
- Support shuffling tests and repeating execution based on command line
arguments.
For example, build with
west build -p -b qemu_cortex_m3 tests/kernel/sleep -t run -- \
-DCONFIG_ZTEST_SHUFFLE=y -DCONFIG_ZTEST_SHELL=y
Following commands are available:
uart:~$ ztest
ztest - Ztest commands
Subcommands:
run-all :Run all tests
shuffle :Shuffle tests
list-testsuites :List all test suites
list-testcases :List all test cases
run-testsuite :Run test suite
run-testcase :Run testcase
shuffle accepts two arguments --suite_iter and --case_iter which allows
repeated exercution of testcases or suites.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Disables pb gatt- and gatt proxy advs when suspending Mesh, and
enables them again when resuming Mesh.
Adds `bt_mesh_adv_gatt_send` to `bt_mesh_resume` to make sure that
GATT advs start after resumption.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Previously, `bt_mesh_proxy_gatt_enable` returned the return value from
`k_work_schedule`, which could be a positive (non-error) message.
Now, it only returns negative error codes (else 0).
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
It is useful for an application to be informed when there is
a subscriber waiting for HRS service notification.
Extend HRS service API and add required code to service implementation.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The help text uses the capital case as its an acronym, but passing
capital case fails. Also extend that to others as well.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
For better readability, below rules will help:
* Each command should be separated by a newline
* Each command should end with a full stop (intermediate statements
shouldn't have full stops)
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
We are using standard notation to differentiate optional and mandatory,
so, no need for a heading.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
DLCI receive buffer may overrun if data is not processed fast
enough. This error was not reported before this patch, resulting
in unexplained missing bytes.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Makes it clearer what that bit means:
If set, the channel has capacity to send at least one PDU.
If unset, the channel ran out of credits and won't be able to send
anything until the peer sends credits back.
Also add debug logs.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Prevents confusion, as the similarly-named `l2cap_send()` also unrefs the
buffer if it fails to send.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This adds user configurable CONFIG_LOG_MIPI_SYST_DISABLE_TIMESTAMP
Kconfig option to use it for macro MIPI_SYST_PCFG_ENABLE_TIMESTAMP.
Moving macro definition of MIPI_SYST_PCFG_ENABLE_TIMESTAMP from
mipi-sys-t library to platform.h which defaulted to undef.
CONFIG_LOG_MIPI_SYST_DISABLE_TIMESTAMP gives flexibility to users
when needn't use mipi-sys-t protocol timestamp.
Signed-off-by: Fang Huang <fang.huang@intel.com>
Add functions to do XOR on arrays of memory, with one that
takes arbitrary sizes and one for 32 bits and 128 bits as
those are common sizes for this functionality.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
lwm2m_engine_pause() caused deadlock if it was called within
engine thread.
Remove while loop from lwm2m_engine_resume().
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Add short delay before triggering registration update. This allows
postponing the update from application side if needed.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
If an instant based remote procedure 'overtakes' a local ditto
the local procedure will be 'completed' by remote rejection
but collision flag would not get set ensuring that a new local
conflicting procedure cannot be started before the remote is completed.
This can thus lead to invalid local initiation.
Added unittest to cover case
Fix by ensuring collision flag is set also in the above mentioned
scenario.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Replace mutexes with semaphores to protect the channels in conjunction with
a priority boost algorithm based on the observers' priority.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
DTLS socket is not really connection-less as UDP, as it required the
DTLS handshake to take place before the socket is usable. Therefore,
align the DTLS connect() behavior with regular TLS.
The change is backward compatible. connect() call is still optional for
DTLS socket (the handshake can still take place from send()/recv()) and
a socket option was provided to disable DTLS handshake on connect().
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When using DTLS socket, the application may choose to monitor socket
with poll() before handshake has been complete. This could lead to
potential crash (as the TLS context may have been left uninitialized)
and unexpected POLLIN reports (while handshake was still not complete).
This commit fixes the above - POLLIN will only be reported once
handshake is complete and data is available
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case a socket error was caused by TLS layer, it was not reported with
POLLERR. This commit fixes this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case TLS session is closed at the TLS level (and thus recv() reports
0 to the application) a certain race occurs between consecutive recv()
call, and TCP session teardown. As mbedtls_ssl_read() only reports
session close upon receiving CLOSE alert, consecutive non-blocking
recv() calls would report EAGAIN instead of connection closed, if called
before underlying TCP connection was closed.
Fix this, by storing the information that TLS session has ended at TLS
socket level. The new flag will be checked before attempting further
mbed TLS actions, so that connection status is reported correctly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The CMUX resync mechanism can get stuck between states
MODEM_CMUX_RECEIVE_STATE_RESYNC_0 and
MODEM_CMUX_RECEIVE_STATE_RESYNC_1 if the resync flags, which are
sent only once in state MODEM_CMUX_RECEIVE_STATE_SOF, are not
responded to, or the response is lost.
This patch ensures resync flags are sent from states
MODEM_CMUX_RECEIVE_STATE_SOF, MODEM_CMUX_RECEIVE_STATE_RESYNC_1
and MODEM_CMUX_RECEIVE_STATE_RESYNC_2 if its determined that the
resync flags are not being responded to.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The chat module contains an array of three lists of matches,
one of which are static, two of which are contained within the
currently running script. The current match, which is an
object stored in one of the three lists, is stored in its own
pointer in the chat module context.
A memory error occurs when the script is stopped, while the
chat module is using one of the matches stored withing the
script. This commit clears the match pointer when the script
is stopped if the match is stored within the script.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
If we receive a IPv4 packet to v4 mapped address, the relevant
net_context is bound to IPv6. This causes issues if we try
to get the family from the context struct in sendto.
Fix this by checking if the destination address is IPv4 but
the socket is bound to IPv6 and v4 mapping is enabled.
If all these criterias are set, then set the family of the
packet separately and do not get it from net_context.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make sure iovec is initialized to a value so that there
is no possibility that it is accessed uninitialized.
Fixes: #66838
Coverity-CID: 334911
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The original idea was to check that we have enough network
interfaces in the system. The check needs to verify max IPv4
and IPv6 supported interfaces instead of always checking
IPv6 one.
Fixes: #66843
Coverity-CID: 334899
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
In cases where the data is bigger than 127 bytes,
the first bit of the second byte of the data length field
used to always be set.
This is wrong as according to the 3GPP 27.010 spec
only the first bit of the first byte is the EA bit;
all the others denote the data length.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
When these fails the compiler just prints "Option must be enabled" with
no reference to what option, so one has to look at the code to find out.
Mention the actual option in the error to make these unambiguous.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
This moves bt_has_client instance structure to has_internal.h header
file to be able to access to the instance members in tests.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The dictionary logging passed the full log_output structure
to the backend instead of the user context void pointer.
Signed-off-by: Kai Meinhard <meinhard@gessler.de>
Without this, the hardware watchdog would expire if no task watchdogs were
registered within one hardware watchdog period after init. Start the
background channel immediately after init to avoid this.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Refactored the socket state indication into its own function
that checks the state of TX queues as well as number of
pending CoAP responses.
Check the state after receiving a packet, as it might
have been a last Ack packet we have been waiting.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
The SPI STM32 Host Command backend doesn't use general SPI driver, so it
has to implement Power Management on its own.
The suspend procedure includes: setting pins to the sleep state,
disabling device clock and disabling CS pin interrupt.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
