Modifies the audio configuration (ac) commands for CAP
and GMAP to use the default presets instead of supplying
the preset as arguments. This will allow the user to
use the `bap preset` command to configure everything in the
codec configuration before the AC commands are issued.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add notes on how the LE Audio stack is designed and why data is
sometimes placed and controlled by the stack or the application.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The following changes:
- Generally reword all the paragraphs to hopefully by clearer and
easier to read by using more straighforward and direct wording,
and avoiding run on sentences and ambiguous/wrong grammar, etc.
- Move Examples to the bottom of the page.
- Fix a typo in the code expression where there was an extra
parentheses.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Mention the new can_get_bitrate_min() and can_get_bitrate_max() CAN
controller API functions along with the deprecating of the existing
can_get_min_bitrate() and can_get_max_bitrate().
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The directory name in boards has been changed with the addition of
support for Arduino UNO R4 WiFi, so add a redirect from
boards/arduino/uno_r4_minima to boards/arduino/uno_r4.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Remove IPSP support from the tree.
It has no maintainers, and is regularly broken. The fact that it's
nontrivial to set-up in linux makes it hard to fix reported issues.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Update the Zephyr `gdbstub` documentation with its 'how to use'
example to align with former sample application replaced by the test.
Fixes: zephyrproject-rtos#70966
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
This test is intended to teach the conventions and best practices to a
potential contributor that wants to add a test, for say a new feature.
It is liberally commented on purpose, so new contributors don't have to
spend two weeks understanding the intricacies of the simulator, the bsim
test framework, the native builds, backchannels, etc..
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
The cap_initiator unicast_stop command will now stop
all streams by default, without supplying the "all" argument.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit adds a small overview over resources
related to LE Audio, both Zephyr specific and
general information from the Bluetooth SIG.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some of the services have some unique points worth knowing
as both a contributor and an application developer.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The bap_broadcast_assistant mod_src command can now take "unknown"
as a value to supply BT_BAP_PA_INTERVAL_UNKNOWN to the scan
delegator.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The documentation for the command
bap_broadcast_assistant broadcast_code
was incorrect and has been fixed.
Additionally, and example of the command has been added
in the shell documentation.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The SparkFun Pro Micro header pins are numbered D1, D0, GND, ... from top
left whereas the SparkFun Pro Micro RP2040 and the Adafruit KB2040 boards
are using gpio 0, 1, GND, ... , so the pro_micro: connector gpio-map of
these boards should reflect that.
Graphical Datasheet for SparkFun Pro Micro RP2040:
https://cdn.sparkfun.com/assets/e/2/7/6/b/ProMicroRP2040_Graphical_Datasheet.pdf
Graphical Datasheet for SparkFun Pro Micro:
https://cdn.sparkfun.com/assets/f/d/8/0/d/ProMicro16MHzv2.pdf
Pinout of the Adafruit KB2040:
https://learn.adafruit.com/assets/106984
Please note that the KB2040 uses CircuitPython pin labels D0, D1 which does
not seemt correspond to the Arduino labels D0 and D1 used by the Pro Micro.
Signed-off-by: Daniel Irekvist <ulmanyar@gmail.com>
Update system pm diagram to reflect recent changes in the subysystem.
Use graphviz to create this new diagram.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Since GTBS and GMCS in both spec definitions and
in the Zephyr implemenation are notably different,
it is worthwhile pointing these out in the documentation
for content control.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
s/System Power Management/System Managed Device Power Management/g
System Power Management is confusing and does not tell
anything about device. Change it for something more explicit.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Deprecate CONFIG_NET_TCP_ACK_TIMEOUT as it is redundant with the
combination of CONFIG_NET_TCP_INIT_RETRANSMISSION_TIMEOUT and
CONFIG_NET_TCP_RETRY_COUNT. The total retransmission timeout (i. e.
waiting for ACK) should depend on the individual retransmission timeout
and retry count, having separate config is simply ambiguous and
confusing for users.
Moreover, the config was currently only used during TCP handshake, and
for that purpose we could use the very same timeout that is used for the
FIN timeout. Therefore, repurpose the fin_timeout_ms to be a generic,
maximum timeout at the TCP stack.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Added clarification on AES-CMAC usage in DFU metadata, emphasizing its
sole role as a hashing function for the incoming composition data hash.
Notably, it utilizes a fixed key and is not employed for encryption
purposes.
Signed-off-by: Stine Åkredalen <stine.akredalen@nordicsemi.no>
Generate a sitemap.xml for the documentation.
This aims at helping search engines react faster to the addition/removal
of new pages.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
- Remove OS specific instructions, instructions depend on the shell and
are the same across OS;
- Add fish shell to the documentation.
Signed-off-by: Théo Battrel <theo.util@protonmail.ch>
`pthread_attr_getinheritsched()` and
`pthread_attr_setinheritsched()` are now implemented,
mark it so.
signed-off-by: Gaetan Perrot <gaetanperrotpro@gmail.com>
Instead of having a single config specifying the memory pool size for
variable-sized net buffers, have a separate one for TX and RX for better
configuration granularity when optimizing memory usage of the
application.
Deprecate the old configuration but use its value as a default (for now)
for the new configs. This will need to change when the config is
deleted.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The currently used PyYaml version has some vulnerabilies as
described on the pull request description. It updates to
version 6.0, removing these supply chain vulnerabily.
The OSSF Scorecard was the tool used for discovering
these vulnerabilties.
Signed-off-by: Javan lacerda <javanlacerda@google.com>
Since I have integrated some samples into samples/drivers/led_strip,
seting up redirection from the deleted apa102, lpd8806, and ws2812.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
The Virtual LAN is changed to use the virtual network interfaces.
Add information what changes might be needed because of this.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
On the request of the maintainer.
Background:
We have recently had issues with tests timing out because of the
difference of speed between CI runners and a standard developer machine.
In that case, the logs are printed, and some tests (by yours truly) are
a bit on the chatty side. Github's UI chokes (for a good minute or more
lol) on more than a few hundred lines, so it's a bad experience for
contributors.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Mark the POSIX_NETWORKING Option Group as supported. The
POSIX_NETWORKING Option Group is required for PSE53 Conformance.
Signed-off-by: Chris Friedt <chrisfriedt@gmail.com>
Update the presentation of the hardware hierarchy description so that it
does not appear to have missing words at the end of the bullet points,
by using a paragraph instead. And tweak the wording slightly.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
