The old project, liblc3codec, is not used anymore. Rename the Zephyr
module name, folders, and Kconfig options based on the new name, liblc3.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Many device pointers are initialized at compile and never changed. This
means that the device pointer can be constified (immutable).
Automated using:
```
perl -i -pe 's/const struct device \*(?!const)(.*)= DEVICE/const struct
device *const $1= DEVICE/g' **/*.c
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
It is frequent to find variable definitions like this:
```c
static const struct device *dev = DEVICE_DT_GET(...)
```
That is, module level variables that are statically initialized with a
device reference. Such value is, in most cases, never changed meaning
the variable can also be declared as const (immutable). This patch
constifies all such cases.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Rename the can_state enumerations to contain the word STATE to make their
meaning more clear:
- CAN_ERROR_ACTIVE => CAN_STATE_ERROR_ACTIVE
- CAN_ERROR_WARNING => CAN_STATE_ERROR_WARNING
- CAN_ERROR_PASSIVE => CAN_STATE_ERROR_PASSIVE
- CAN_BUS_OFF => CAN_STATE_BUS_OFF
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Change sourcing of generated Kconfig.module to be optional.
It should be possible to run parse the Zephyr Kconfig tree even if the
Kconfig.modules file has not been generated.
This can be useful in testing where you may wish to run without Zephyr
modules present, and thus not load the Zephyr module CMake module.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Remove the "z" prefix from the public CAN controller API types as this
makes them appear as internal APIs.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Debug log messages generated by mbedTLS library contain newline at the end
of log string. Remove this newline, if it exists, so that log output is
much more user friendly.
Add a dedicated Kconfig option for that, so it can be disabled on request.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
So far LOG_DBG() was used inside debug hook for mbedTLS library. This meant
that it was hard to distinct log messages by simply looking at the log
level number, even though Zephyr logging subsystem supports colorful logs
depending on log level.
Choose an appropriate Zephyr LOG_*() macro based on log level coming from
mbedTLS library. Remove log level number from formatted log messages, as it
is now redundant.
One controversial thing about this change is that mbedTLS' "2 State change"
log level is mapped to Zephyr's "warning" log level. Those are not really
warnings in real life, but rather informational messages. However, using
"warning" log level for those allows to clearly distinguish between "2
State change" and "3 Informational" debug messages from mbedTLS.
Additionally, mbedTLS debug message implementation does not seem to be safe
to use in production, so keeping in mind MBEDTLS_DEBUG will be enabled just
during debugging phase, printing "2 State change" logs as warnings should
not be a big deal.
Set default MBEDTLS_DEBUG_LEVEL value depending on selected Zephyr logging
module level, so that only single option needs to be configured in
application project.
Remove prompt for MBEDTLS_DEBUG_LEVEL, so that interactively (e.g. via
menuconfig) adjusting MBEDTLS_LOG_LEVEL will always result in automatically
updating MBEDTLS_DEBUG_LEVEL option. This is to prevent so called "stuck
symbol syndrome".
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
So far there was a runtime basename extraction of filenames passed to
mbedTLS debug hook. This has both runtime penalty as well as code size
penalty.
Introduce a buildtime support of extracting basename of source filenames
logged using logging subsystem, so that there is no need to do it at
runtime.
Provide Kconfig options for both buildtime and runtime basename extraction,
as in some cases the buildtime basename extraction might not work,
depending on toolchain used for building Zephyr. Default to buildtime when
using Zephyr SDK, as that is proven to work. Use runtime basename
extraction in other cases (other toolchains used).
This saves approximately 204 bytes of code footprint for sample
application with native TLS sockets built for nRF52840.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
mbedTLS library threshold initialization was done in native TLS socket
implementation (which tends to use mbedTLS now) and inside mbedTLS
benchmark test. Move that to mbedTLS module initialization, as this is a
global setting.
Update description of CONFIG_MBEDTLS_DEBUG_LEVEL to clarify when
mbedtls_debug_set_threshold() is called.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
So far there was a debug log hook installed in TLS socket implementation.
However, mbedTLS (with debug enabled) might be used outside from TLS socket
and even outside from networking context.
Add new module, which implements debug log hook and makes it available
whenever CONFIG_MBEDTLS_DEBUG is enabled.
Note that debug hook needs to be installed for each mbedTLS context
separately, which means that this requires action from mbedTLS users, such
as TLS sockets implementation.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Remove modules/hal_nordic/Kconfig.dt as we now autogenerate the
contents of this file based on the dts bindings in tree.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add module specific compiler flags to suppress reporting unused
variables and unused functions in mbedtls building.
Signed-off-by: Eugene Cohen <quic_egmc@quicinc.com>
Signed-off-by: Dave Aldridge <quic_daldridg@quicinc.com>
Update lvgl for devicetree updates to use zephyr,keyboard-scan.
Remove Kconfig symbol (LV_Z_POINTER_KSCAN_DEV_NAME) that don't exist
anymore since these values are coming from devicetree.
Signed-off-by: Kumar Gala <galak@kernel.org>
Introduce uoscore-uedhoc repository, providing OSCORE and EDHOC
libraries as a new Zephyr module.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Instead of relying on selected ciphesuite to enable mbed TLS EC configs,
add separate config entries to enable them. This allows to use EC
functionality w/o TLS/DTLS enabled.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
psa_crypto_cipher.c includes an internal header with <>, causing
complication errors in Zephyr (header not found).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The CMP, TMU and SHRTIMER modules were not compiled. Add them now that
GD32E50X series support is being added (this SoC has such units).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Add some compile definitions necessary for the gd32e50x HAL and select
default crystal clock.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Add `OPENTHREAD_CONFIG_MESSAGE_BUFFER_SIZE` to Kconfig.
Also set the number of children to minumum possible for MTD builds
in order to save some resources (~512B of RAM).
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Use chosen ieee802154 device from DT since
CONFIG_NET_CONFIG_IEEE802154_DEV_NAME is being phased out.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Exclude the non-secure TF-M application from being built by TF-M.
This also stops the building of the tfm_ns_api library that we were
linking against.
This library is defined by the tf-m regression tests.
Add the installed interface source files exported by the TF-M build
system compile them in the zephyr build system.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The OpenThread module should not explicitly link with libc in case of
minimal libc or picolibc.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
LV_Z_DISPLAY_DEV_NAME, LV_Z_HOR_RES_MAX, & LV_Z_VER_RES_MAX
Kconfig symbols don't exist anymore. They got removed in
recent devicetree update of lvgl module. So remove them from
modules/Kconfig.lvgl.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add missing `LV_Z_HOR_RES_MAX`, `LV_Z_VER_RES_MAX`
and `LV_Z_DISPLAY_DEV_NAME`
Kconfig symbols to fix the following Kconfig warnings:
warning: LV_Z_DISPLAY_DEV_NAME defined without a type
warning: LV_Z_HOR_RES_MAX defined without a type
warning: LV_Z_VER_RES_MAX defined without a type
Fixes
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Zephyr kernel is dependent on trace.
Trace is dependent on segger rtt.
Segger rtt MUST NOT be dependent on zephyr kernel.
Move lock functions from header into c file to avoid circular
dependency. This fix needs an update of the segger repository.
Fixes#43887.
Signed-off-by: Christoph Coenen <ccoenen@baumer.com>
Move the RX (MISO) delaying capability information to Devicetree. It is
done using 2 properties:
- rx-delay-supported: enabled on SPI nodes that support delaying RX.
This property can be used by the driver to determine if this
capability is supported or not on a given instance.
- rx-delay: the actual RX delay value
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
With support for deprecating Kconfig symbols within the Kconfig tree
itself, there is no reason to have a secondary location to maintain
for information that is based on a Kconfig setting in first place.
Better to directly do `select DEPRECATED` on the symbol itself, than to
maintain a secondary list with messages in CMake.
Hence removing this feature in CMake.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Move scripts needed by the build system and not designed to be run
individually or standalone into the build subfolder.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move OpenThread's glue code along with the Kconfig files that configure
OpenThread stack itself into module directory.
Update the maintainers file to reflect this change.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Move to use DEVICE_DT_GET_ONE instead of device_get_binding as
we work on phasing out use of DTS 'label' property.
Signed-off-by: Kumar Gala <galak@kernel.org>
According to mbedTLS' Changelog "Mbed TLS 3.0.0 branch released
2021-07-07" -> "Removals":
MBEDTLS_ECP_MAX_BITS is no longer a configuration option because it
is now determined automatically based on supported curves.
Hence remove MBEDTLS_ECP_MAX_BITS from configuration files to fix build
issues with Zephyr when there is unfortunate order of include
statements.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Zephyr adds a custom handler that overrides the weak function
sys_arch_reset when TF-M platform partition is enabled.
This takes away the option for the application to override the weak
definition for their platform or use-case.
Add an option that control whether this default reset handling is added
to the build.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Allow the application to enable the FPU when TF-M has been enabled.
Pass the correct compilation flags according to the TF-M integration
guide.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
There is a compiler bug in the current Zephyr SDK (GCC 10.3.0) that
prevents using LVGL on ARM Cortex M0/M0+. Disable LVGL on such CPU until
the next SDK is deployed (GCC 12.1), as the issues does not appear
anymore.
Ref. https://github.com/lvgl/lvgl/issues/3425
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
A recent change to hal_rpi_pico's cmake, intended to fix the
compilation via Unix Makefiles, ended up not linking the BL
to the final ELF. This commit fixes both problems.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
This code has gone unmaintained and bugs continue to be reported
against it. We do not have the resources as a project to maintain this
in "odd fixes" mode, and nobody has stepped up to maintain it [1], so
sadly this must be removed for now.
If anyone would like to see civetweb supported in upstream Zephyr
again, they are welcome to add it back, as long as they promise to
maintain it going forward.
Many thanks to everyone who has contributed to civetweb support in
Zephyr while it was here. So long and thanks for all the fish.
Fixes: #45807Fixes: #43910Fixes: #34226Fixes: #46743
[1] https://lists.zephyrproject.org/g/devel/message/8466
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
