This commit extends USB hid API callbacks by adding
'const struct device *dev' parameter. If the application
configured more than one HID device then it must specify
separate hid_ops for each device as its unable to determine
for which device the callback was called.
This patch makes it possible to have only one hid_ops within
the application and the application is aware for which device
the callback was called because of explicit device pointer.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
nRF53 application core does not have RNG peripheral.
Software implementation must be used instead.
This patch adds config overlay for hid-cdc nRF5340 sample.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add configuration and overlay files for Adafruit feather nRF52840.
README has also been updated and improved. Documentation related to
littlefs has been moved to an independent section as it could apply to
any sample.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Make the flash-backed USB mass storage sample depend on usb_device and
flash instead of just flash.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
This patch removes unused Kconfig option from console
subsystem. If application wants to wait until the console
port is connected, enabled and ready to receive data
it should use uart_line_ctrl_get() API function and
check for DTR flag.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
usb_enable() must be called once by the application.
The application may want to register usb_dc_status_callback
and trace usb status codes (usb_dc_status_code).
After this patch all pre APPLICATION messages will be dropped
as USB console device is enabled in the application.
Application waits for console device until its ready by checking DTR
flag - uart_line_ctrl_get(). This function could be dropped but then
some log messages that were generated before USB device is ready
could also be dropped.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
USB device shall be able to send only in CONFIGURED state.
Zephyr USB HID device class allows to send the data no matter
of the USB state what is wrong. Attempting to write to endpoint
buffer in state != CONFIGURED may lead to driver error.
This patch introduces state tracing for USB HID class and
allows to send data using hid_int_ep_write() class API
only if the device remains in CONFIGURED state.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Now that the relevant APIs generalize properly for bindings without
flags, we can remove some special case checks from the tree.
I couldn't find any more, but I did this kind of quickly, so it's
possible I missed some.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
It was already using uart_irq_callback_user_data_set below, now it also
uses uart_irq_callback_user_data_t as callback type, so let's normalize
the callbacks.
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Configuration file was left unchanged after development
of USB Audio class. Deleted configs should never be present.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
USB access to the flash device is not synchronized with the
application, so if the application needs to create a new file system
USB may read configuration state that is incorrect. Wait until the
the application is done with the flash before starting USB.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Left unset it becomes the first partition, which is not what's used
for littlefs, and specifically isn't on the external flash for
nrf52840dk_nrf52840.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The flash interface header needs to be available regardless of
selected filesystem implementation.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
This provides a better error message when building with CMake and
forgetting ZEPHYR_BASE or not registering Zephyr in the CMake package
registry. See parent commit for more details (split from parent for
better readability).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Add a note for composite (CDC+DFU) device overlay.
Composite device CDC+DFU may not work with Windows OS host.
Windows OS does not send reset after DFU_DETACH request
(does not re-enumerates) and thus make it unable for
the device to restart in DFU mode.
For more details refer to #23337.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
The USB audio samples when added didn't have any tests: sections in the
sample.yaml so they would never get build on any platform as part of
sanitycheck. Add the tests: section and limit the samples to build on
nrf52840dk_nrf52840 as that was the intended platform these samples
where initially developed for.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert with a combo of scripts and by hand fixups:
git grep -l DT_FLASH_AREA_.*_ID | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_ID/FLASH_AREA_ID(\L\1)/'
git grep -l DT_FLASH_AREA_.*_OFFSET | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_OFFSET/FLASH_AREA_OFFSET(\L\1)/'
git grep -l DT_FLASH_AREA_.*_SIZE | \
xargs sed -i -r 's/DT_FLASH_AREA_(.*)_SIZE/FLASH_AREA_SIZE(\L\1)/'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit adds USB audio sample to the Zephyr project.
The sample configures one I/O device:
- Headset (2 channels, Fs=48kHz, PCM format)
Input data sstream is passed to output data stream.
For more details refer to README.rst.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This commit adds USB audio sample for Zephyr project.
The sample configures two devices:
- Microphone (2 channels, Fs=48kHz, PCM format)
- Headphones (2 channels, Fs=48kHz, PCM format)
Input data stream is passed to output data stream.
For more details refer to README.rst.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This commit introduces dedicated return type for custom_handler.
Relevant code is updated to fulfill the API documentation.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This allows mass storage exposure of a littlefs file system,
specifically one on the SPI NOR flash of the nrf52840dk_nrf52840. In
combination with littlefs-fuse this allows a host system to examine
and change the local storage of a Zephyr application.
Note that it is critical that all parameters of the file system match
between what Zephyr is using and what littlefs-fuse is using.
Inconsistencies can produce confusing results where each system sees
different content. The README has been updated with a detailed
example.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Drop the old redefine-everything-in-a-special-conf approach and put
the customization appropriate for this board into the board directory
where it's handled automatically.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
This adds USB_PID_BLE_HCI_H4_SAMPLE along with it driver which uses H4
over bulk endpoints.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The board name for the nRF52840 Dongle, so far known as
nrf52840_pca10059, is renamed to nrf52840dongle_nrf52840. Its
documentation and all references to its name in the tree are updated
accordingly. Overlay and configuration files specific to this board are
also renamed, to match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Kernel timeouts have always been a 32 bit integer despite the
existence of generation macros, and existing code has been
inconsistent about using them. Upcoming commits are going to make the
timeout arguments opaque, so fix things up to be rigorously correct.
Changes include:
+ Adding a K_TIMEOUT_EQ() macro for code that needs to compare timeout
values for equality (e.g. with K_FOREVER or K_NO_WAIT).
+ Adding a k_msleep() synonym for k_sleep() which can continue to take
integral arguments as k_sleep() moves away to timeout arguments.
+ Pervasively using the K_MSEC(), K_SECONDS(), et. al. macros to
generate timeout arguments.
+ Removing the usage of K_NO_WAIT as the final argument to
K_THREAD_DEFINE(). This is just a count of milliseconds and we need
to use a zero.
This patch include no logic changes and should not affect generated
code at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This is joint work with Kumar Gala (see signed-off-by).
Document the changes to the generated node macros in macros.bnf,
moving the old file to legacy-macros.bnf and putting it in its own
section.
The actual generated macros are now a low-level detail, so rewrite the
foregoing sections as examples in terms of the new <devicetree.h> APIs.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert the sample to use the new GPIO API and additionally:
- add some error messages for unsuccessful GPIO API calls
- correct the index of `def_val` element used in the `right_button`
callback, to match the one used when the callback is installed
- use flags defined in devicetree for the pin that drives the LED
(for consistency, as this does not make much difference for a pin
that is only toggled)
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
By this commit user gets possibility to register USB
device satutus callback. This callback represents device state
and is added so user could know what happend to USB device.
Callback is registered by providing it to usb_enable()
USB api is extended by this callback handler.
Samples using using USB are by default provide no callback
and the usb_enable() is called with NULL parameter.
Status callback registered by hid class is deleted as now
USB device has global callback for all classes within device.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Remote wakeup for Nordic SoCs should always be enabled.
Thus do not depend it for each SoC. Instead depend it on
chosen driver.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Remove leading/trailing blank lines in .c, .h, .py, .rst, .yml, and
.yaml files.
Will avoid failures with the new CI test in
https://github.com/zephyrproject-rtos/ci-tools/pull/112, though it only
checks changed files.
Move the 'target-notes' target in boards/xtensa/odroid_go/doc/index.rst
to get rid of the trailing blank line there. It was probably misplaced.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The seasonal overhaul of test identifiers aligning the terms being used
and creating a structure. This is hopefully the last time we do this,
plan is to document the identifiers and enforce syntax.
The end-goal is to be able to generate a testsuite description from the
existing tests and sync it frequently with the testsuite in Testrail.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some of defines are present in several header files.
Those defines are the same with value but with different naming.
Common defines are brought to usb_common.h
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
By adding new SoC to Zephyr drivers has to be updated.
Commit affects:
- USB driver
- support for nRF52833 added.
- support for USB_DEVICE_REMOTE_WAKEUP in hid-mouse added.
- SPI
- IEEE 802.15.4
- CLOCK CONTROL
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
Several macros were documented as deprecated but lacked the
infrastructure to produce deprecation warnings. Add the deprecation
marker, and fix the in-tree references to the deprecated spellings.
Note that one non-deprecated macro should have been deprecated, and
is, referring to a newly added line control bit.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
