Applications need to run a scan to identify the security
mode before attempting the connection which adds to the time
taken for connection to be established.
To avoid the initial scan, support auto security mode which will
enable STA to choose between WPA, WPA2 and WPA3, based on the
network configuration.
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
In situations, where the address, the port and the auth token of the
hawkbit server are not known during build, it should be possible to set
it during runtime.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
This commit fixes removing indirect blocks (marking them as 0)
in the inode structure. Previous version of the code was removing
the top-level blocks only when the first removed block was
one of the first 12 direct blocks. However, when the first removed
block is the first block in the referenced block list, its parent
(indirect block) should also be removed.
Signed-off-by: Franciszek Pindel <fpindel@antmicro.com>
Since `NONE` is a valid option for key management in `connect`
command, we should remove the part in help text which says:
"valid only for secure SSIDs".
Signed-off-by: Ravi Dondaputi <ravi.dondaputi@nordicsemi.no>
UBSan was showing the following error:
```
runtime error: left shift of 137 by 24 places cannot be represented in
type 'int'
```
Cast the value to `uint32_t` to make UBSan happy.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The comment states the reason for this requirement is to detect
violations by a remote peer. The ATT version of this was removed in
ea04fd95f9. TLDR: It's neither possible
for, nor the job of the host to police the remote device.
We remove this requirement to be more flexible about the number of
priority levels in the system, and to avoid the temptation of using
priorities as a synchronization mechanism.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
The remote domain may send unsolicited Z_LOG_MULTIDOMAIN_ID_DROPPED IPC
messages, which are not handled in log_multidomain_link_on_recv_cb().
With CONFIG_ASSERT=y, this will cause an assertion failure. With asserts
disabled, this message would be treated as a reply to any in progress
request and cause getter_msg_process() to return early. In turn, this
can cause various kinds of memory corruption when the real reply arrives
and the callback reads/writes stack variables that are no longer valid.
Fix this by explicitly ignoring Z_LOG_MULTIDOMAIN_ID_DROPPED, and also
don't treat unrecognized message types as replies.
Signed-off-by: Ben Wolsieffer <benwolsieffer@gmail.com>
This fixes warnings when building with icbmsg
backend for IPC service by defining
_POSIX_C_SOURCE 200809L in source file.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
In hawkbit there are currently a lot of values send to the server, that
are not required or even optional. This commit corrects that.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
This commit change a method of printing multicast routes by showing
all interfaces per entry instead of aggregating them by interface.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
In order to save memory, a single multicast routing entry now
contains configurable number of network interfaces.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
This commit adds a check to determine if the packet wasn't already
forwarded to a given interface.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
This commmit changes the way of iterating over multicast routing
entries from explicit for-loop to ARRAY_FOR_EACH_PTR().
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
The log message header "source" field for messages received from a
remote domain contains the source ID, rather than a pointer to the
source data (which would not be valid in the local domain).
msg_filter_check() did not handle this case and obtained a garbage source
ID for remote log messages. This caused an assertion failure in
filter_get().
Consistently handle this by adding a log_msg_get_source_id() function
that returns the source ID for both local and remote messages. This
function was implemented based on code factored out of
log_output_msg_process().
Signed-off-by: Ben Wolsieffer <benwolsieffer@gmail.com>
Add support for decoding incoming LC3 data. At this point
we only instantiate a single LC3 decoder, so only one frequency
and duration is supported.
To accomodate for the increased RAM usage, the number of unicast
streams support have been decreased.
Further more, the LC3 handling in the shell has overall been
improved, also for encoding.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Returned values are copies, so trying to "const" return values cannot
have any effect.
Fixes the following compiler warning:
```
llext.h:165: warning: type qualifiers ignored on function return type
```
Fixes commit 41e0a4a371 ("llext: Linkable loadable extensions")
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
`ret` is the amount sent from the current buffer. `sent` contains the
total amount that was transferred in the while loop.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Modifies the audio configuration (ac) commands for CAP
and GMAP to use the default presets instead of supplying
the preset as arguments. This will allow the user to
use the `bap preset` command to configure everything in the
codec configuration before the AC commands are issued.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When creating a broadcast sink using the auto scan feature,
the call to bt_le_per_adv_sync_create would use a local
PA sync pointer, instead of one from the per_adv_syncs
array, making it impossible to stop the PA sync afterwards.
This commit modifed the auto_scan so that it properly uses
the per_adv_syncs array, while still assigning the PA sync
in the shell broadcast sink struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The print_codec_cfg_chan_allocation did not take the case where
chan_allocation == BT_AUDIO_LOCATION_MONO_AUDIO into account,
in which case it should print "Mono".
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The commit 8256d02d3a introduced
getopt parsing for the wifi connect command
This needs to be updated for the wifi ap enable since ap
enable also uses the same parsing as connect.
The use of getopt removes the parameter ordering restrictions
Signed-off-by: Brad Kemp <brad@beechwoods.com>
In case FIN packet included data bytes, Zephyr would ignore the
data. It wasn't passed to the application, and it wasn't considered
when bumping the ACK counter. This ended out in connection timing out,
instead of being properly terminated.
Fix this, by refactoring FIN processing in TCP_ESTABLISHED state.
Instead of handling FIN/FIN,ACK/FIN,ACK,PSH cases separately, have a
common handler when FIN flag is present, and when ACK flag is present
along with FIN. When FIN is present, take any potentially incoming data
into account.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
`bt_recv` is invoked from the BT long work queue, which is preemptible.
The host uses cooperative scheduling to ensure thread safety.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Allow changing the CoAP Block-wise transfers block-size
for subsequent GET requests.
It looks like Leshan switches block size back to its
configured value, if it is smaller.
So even when we send block N=0 with size of 512, Leshan
seem to handle that properly but still asks N=2 with
block size 256(if that is configured).
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Implement test version of the LE Create BIG command ll_big_test_create
(BT_HCI_OP_LE_CREATE_BIG_TEST) in the controller.
This enables use of CONFIG_BT_ISO_ADVANCED, which supports use of
the following BIG/QoS configuration parameters (otherwise derived):
- ISO_Interval
- NSE
- Max_PDU
- BN
- IRC
- PTO
Signed-off-by: Morten Priess <mtpr@oticon.com>
Fix regression in BT_RX_STACK_SIZE use due to
commit b91728619c ("Bluetooth: host: remove
`CONFIG_BT_RECV_BLOCKING`").
Profiling of Controller Rx thread has been mentioned in
commit 586ba9fd13 ("Bluetooth: Controller: Increase
BT_RX_STACK_SIZE for BT_HCI_RAW enabled").
Also, move the TX_STACK_SIZE value as default in Kconfig
from the explicit value being set in hci_ipc sample.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Minor improvements to usage of zperf_shell upload.
Added common defaults for the upload commands arguments.
Print defaults in cmd help.
Throw warning when user sets baud rate for TCP upload.
Signed-off-by: Adam Matus <adam.matus@nxp.com>
The network interface parameter for net_eth_get_vlan_tag() should
be the VLAN interface so use the search loop properly.
Earlier the main interface could be checked.
Add also test cases for this so that we can catch that the func
works properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add more error logs in case of (mostly) mbed TLS errors, so it's easier
to get an initial idea of what went wrong based on logs only. Getting
an information on an actual mbed TLS error code is quite helpful in such
cases.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Generic node_rx_hdr struct contains data not used for done event, so this
pdu specific data is moved to node_rx_pdu to minimize memory usage for
MFIFO_done alloc.
This however calls for a considerable write-through replacing the generic
node_rx_hdr with node_rx_pdu when relevant and needed.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Use CONFIG_BT_CTLR_CENTRAL_ISO instead of CONFIG_BT_CENTRAL in
declaring central CIS CREATE procedure context data. In some configs the
size of this data structure is bound by central CIS CREATE, so doing it
correctly will save memory in the procedure context allocation.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
This commit adds support for building relocatable (partially linked)
ELF files as the binary object type for the llext subsystem.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Add a new Kconfig option to select the binary object type for the llext
subsystem. This will allow to fully decouple the architecture type from
the kind of binary object that is expected by the loader.
The defaults have been chosen to match the current behavior of the ARM
and Xtensa architectures, but developers can now more easily experiment
with other object types.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
If central initiates incompatible procedure after having replied (with
_IND), peripheral fails to disconnect as spec'ed.
Fix by correctly setting the INCOMPAT flag to reserved on IND receipt to
enforce the disconnect.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Block size is a 3-bit value mapping values [0, 6] to powers of 2 in the
range [16, 1024]. Value 7 is invalid.
The previous formula was not working in case the client's preferred size
was 4 (or more) times bigger than the server's.
This commit takes into account also the case the client's preferred size
is smaller than the server's.
Signed-off-by: Marco Argiolas <marco.argiolas@ftpsolutions.com.au>
It's needless complexity, and the terminology clashes with
Bluetooth (HCI frags).
It has one user, IPSP, that is going away soon.
Removing frag support will allow a future optimization, removing the
need for HCI and L2CAP fragment buffer pools, saving memory.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Remove IPSP support from the tree.
It has no maintainers, and is regularly broken. The fact that it's
nontrivial to set-up in linux makes it hard to fix reported issues.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
By exposing the underlying iso channel, the application can retrieve
properties of the iso channel.
This can be useful in case the application wants to use the connection
handle for vendor specific HCI commands or to retrieve the particular
parameters used for the given channel.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
