This update fixes a mistake in the pinctrl where pa21 was mapped to
afe1_ad1 instead of afe0_1 as it ought to be.
Signed-off-by: Marius Scholtz <mariuss@ricelectronics.com>
Point to the latest nordic hal module
which includes UART driver fixes needed for simulation.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* Update the HW models module to
d17c9d749c817d2522468fa3c0eee3705feb8951
Including the following:
* d17c9d7 UART: Bugfix: Support STARTRX while Rx is stopping
* d982e76 UART: Minor bugfix: Fix 2 warning messages
* eda7af9 UART: Bugfix: Handle task STOPTX while stopping
* b8ea63b UART: BugFix: Support STARTTx even if Tx is not Off
* c0d28cc nrf_common: Add replacement for nrf_dma_accessible_check()
* feb91bb nrfx_common replacement: nrfx_get_irq_number() Add missing peri
* c95d9af Makefile: By default lets build both 52833 and 5340 targets
* cf41110 UART: FIFO backend: Check for failure of fcntl
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
* Update the HW models module to
6b6ae3652c92c95edd945dce6ad9ef9892aab89b
Including the following:
* 6b6ae36 UART: Minor optimization
* afe84c1 fake timer: Minor speed optimization for nrf52
* a5a4dfd RTC: Fix counter value when CLEAR after STOP
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Update TF-M to version 2.0.0 including
MbedTLS to v3.5.0
TF-M-Tests to v2.0.0
PSA-Arch_Tests to v23.06_API1.5_ADAC_EAC
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
Updated the files present in gecko/se_manager folder in Silabs HAL
as per latest version of gecko_sdk.
Signed-off-by: Sateesh Kotapati <sateesh.kotapati@silabs.com>
SOC_ESP32_NET is now SOC_ESP32_APPCPU, following espressif's
naming convention in the same manner as ESP32S3 app cpu.
SOC_ESP32_APPCU is now a subset of SOC_SERIES_ESP32.
This commit also changes the necessary files, samples and tests
for bisect purposes.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
* Update the HW models module to
a08acc7d3a853f890df2bf82167c02ab2153ffe7
Including the following:
* a08acc7 UART(E): Duty cycle warnings due to Rx while Rx Off
* aa1f38d UART(E): FIFO backend Minor bugfix
* 8b0819f UART(E): Add Loopback backend
* bc648f2 UART(E): Update RTS pin level as soon as the conf is changed
* b39e448 UART(E): Detect receiver opening mid frame
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In order to avoid build failures as described in issue #67242,
make all ST drivers using HAL_ST module dependent to HAL_STMEMSC
and HAS_STLIB libs, which need to be configured in all samples
referring to them.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
this revision contains an usb fix that allows
tests/subsys/usb/device/usb.device to pass on lpcxpresso55s69_cpu0.
see https://github.com/zephyrproject-rtos/hal_nxp/pull/315 for more
information.
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
This commit updates revision of hal_nordic to bring the latest changes
in the nRF IEEE 802.15.4 driver.
Signed-off-by: Andrzej Kuroś <andrzej.kuros@nordicsemi.no>
* Update the HW models module to
c744f2c762aad79e59bd7e99002f2fcab0a2f288
Including the following:
* docs: UART: several minor fixes
* UART(E): Add peripherals and connect to (D)PPI
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Added the sl_assert, sl_common, em_core_generic, em_system_generic files
and updated related files in gecko/common and gecko/emlib to include
the mentioned files.
Signed-off-by: Sateesh Kotapati <sateesh.kotapati@silabs.com>
S32K1xx devices have a maximum of 3 FlexCAN peripherals. Each part may
define a different maximum number of instances and message buffers,
hence the interrupt lines are defined in the part specific dts.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Make sure some ROM libc calls are weak to allow
Zephyr's libc implementation instead.
Fixes#66351
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
New hal_nordic revision contains nrfx 3.3.0 which adds support
for nRF54H20 EngA and nRF54L15 EngA devices.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
This commit updates revision of hal_nordic to bring the latest changes
in the nRF IEEE 802.15.4 driver.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Flash coexistence facility is provided by a dedicated BLE controller
driver added in hal_stm32 WBA lib.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
ESP32 family pinctrl files are currently placed in hal_espressif.
Move to main branch as part of pinctrl dt-bindings.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
This is needed so that module uses K_HEAP_MEM_POOL_SIZE for determining
the availablility of the k_malloc family of functions.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is needed so that module uses K_HEAP_MEM_POOL_SIZE for determining
the availablility of the k_malloc family of functions.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Update to the last relase of open-amp library
The libmetal is updated to a more recent commit to integrate
2 zephyr commits on top of the v2023.10 release.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Update west manifest to point to hal_stm32 PR containing changes
which allow to build a zephyr bluetooth application on STM32WBA.
Prior building such application, user should run 'west blobs fetch stm32'
to install binary blobs providing the BLE controller support.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Imported the original Cooper (Apollo4x BLE controller) device files
from AmbiqSuite SDK 4.4.0 and adapts them to support the new
implemented HCI driver for Apollo4 Blue Plus.
Signed-off-by: Aaron Ye <aye@ambiq.com>
Update the EFR32BG22 device files inside gecko/Device/SiliconLabs/EFR32BG22
from gecko_sdk to align the codebase of hal_silabs with gecko_sdk 4.3.2
Signed-off-by: Sateesh Kotapati <sateesh.kotapati@silabs.com>
Currently on zephyr, RAIL library is used only by Bluetooth applications,
with this update, it will be able to be used for sample applications
for custom radio phys.
All files were copied from Silicon Labs GSDK v4.2.4.
Signed-off-by: Zoltan Havas <zoltan.havas@silabs.com>
Update hal_nxp to remove S32K3X4-0P55A-1P55A-ERRATA
by disabling FSL_FEATURE_LPSPI_HAS_ERRATA_050456.
This allows for lpspi to work correctly on mr_canhubk3.
Signed-off-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
At present, many of the NXP S32 shim drivers do not make use of
devicetree instance-based macros because the NXP S32 HAL relies on an
index-based approach, requiring knowledge of the peripheral instance
index during both compilation and runtime, and this index might not
align with the devicetree instance index.
The proposed solution in this patch eliminates this limitation by
determining the peripheral instance index during compilation
through macrobatics and defining the handler of SI Rx event within
the shim driver itself.
Signed-off-by: Cong Nguyen Huu <cong.nguyenhuu@nxp.com>
Pulls update in nrfx_qspi driver with fixed order of applying workaround
for anomaly 215 on nRF52840 and anomaly 43 on nRF5340.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
This commit bumps openthread commit to `4ed44bc`
and implements `CONFIG_OPENTHREAD_MULTIPAN_RCP` option.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
