The function inteval_timeout() was missing "r", the function
should be called interval_timeout()
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Zperf upload multicast always use default interface.
Zperf download multicast cannot receive packets from other than
224.0.0.1 which is default multicast group.
Add zperf upload/download option -I <interface name> for multicast.
So that user can select interface for multicast.
Add join multicast group for zperf download.
Use the "device list" command to get the interface name as
follows:
"- ua (READY)" #uAP interface name
"- ml (READY)" #STA interface name
Multicast traffic commands:
zperf udp upload -a -I ua 224.0.0.2 5001 10 1470 1M
zperf udp download -I ua 5001 224.0.0.3
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
In order to reduce dns resolve requests when using the dns
resolver an optional cache was introduced. This cache
retains query requests for the TTL duration and therefore
prevents premature refetching of DNS RRs.
Signed-off-by: Carlo Kirchmeier <carlo.kirchmeier@zuehlke.com>
Implement the ALPN Support for Mqtt Library allow mqtt to have
ability to utilize ALPN for connect to server that support ALPN, such
as AWS IoT Core
Signed-off-by: sukrit buddeewong <sukrit.omu@gmail.com>
For command zperf udp download 5001 192.168.10.1,
zperf will bind both ipv4 and ipv6 sockets on ipv4 address.
But bind ipv6 socket will fail, thus command return fail.
Fix it by check ip address when zperf download.
For ipv4 address only bind ipv4 socket.
For ipv6 address only bind ipv6 socket.
For unspecific address bind both ipv4 and ipv6 sockets.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
On some content-types, it might be impossible to
send strings with size of zero.
Therefore empty URI should also allow cases
where strlen() is zero.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
With recently introduced DNS retransmission mechanism, a certain bug
could occur when calculating query timeout.
If the time until the final DNS timeout (as indicated by
CONFIG_NET_SOCKETS_DNS_TIMEOUT) was less than 1 millisecond, the actual
millisecond timeout value was rounded down, resulting in 0 ms timeout.
This in order was interpreted as invalid argument by dns_get_addr_info()
function, so in result, instead of reporting query timeout, the function
reported invalid argument error.
Fix this by rounding the millisecond timeout up, instead of down, so
that in any case, if the final timeout is not due, we always provide
non-zero timeout to dns_get_addr_info().
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Rework TELNET shell backend to use socket API for communication and
socket service library for socket monitoring.
Additionally, rework the TX part so that non-blocking TX is used when
sending from the system work queue. In case transfer is not possible at
the moment, the TX work is rescheduled instead of blocking the system
work queue.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Socket service pollfd count should not exceed the configured
NET_SOCKETS_POLL_MAX limit, as poll() will not be able to monitor
sockets beyond that limit anyway. Adding +1 there prevented the library
from catching the configuration error.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When we receive the subnet mask option from the server, we
cannot yet set the netmask to the network interface as the
mask is tied to the IP address we received from the server.
We need to delay the setting of netmask until we have added
the requested IP address to the interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
In case the LL address is not set on a packet for any reason, don't try
to access address structure to determine packet type.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In iperf2, for multicast data, if it is a client, it will not wait for
the server's AckFIN packet. Because the iperf2 server will not send an
AckFIN packet.
So in zperf_upload_fin(), an error will occur when the zperf client
waits for the server's AckFIN packet.
Multicast only send the negative sequence number packet and doesn't
wait for a server ack can fix this issue.
Signed-off-by: Gang Li <gang.li_1@nxp.com>
The count stack variable is also used when CONFIG_NET_L2_ETHERNET_MGMT is
enabled. Make sure it is available.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
If getaddrinfo() is called with a long DNS timeout, then split
the timeout to smaller pieces with exponential backoff. Reason
for this is that if a DNS query is lost, then we do not need
to wait for a long time to find it out.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
DTLS socket should be able to combine more than one message into a
single datagram when calling sendmsg().
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In certain scenarios, it may be necessary to get values of additional
options from the application layer. With this patch, this can be
accomplished by registering a callback with the DHCP client.
This change has been tested using the posix build in qemu.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Nearly all other code places for k_thread_entry_t also keep
unused params in place to stay compatible with k_thread_entry_t.
Signed-off-by: Florian La Roche <Florian.LaRoche@gmail.com>
Fixes two bugs:
* When a notify is executed before any observers are added, the age is
incremented from 0 to 1. When an observer is registered, the age is not 0
as expected, causing the age to be 1 instead of the expected 2
* The check if a message is newer than the last received one is described
in RFC7641, section 3.4. Simply incrementing age will not comply to what
the RFC describes once the value wraps around. This is now fixed
Signed-off-by: Sibert Declercq <sibert.declercq@basalte.be>
Convert various networking subsystem files to use ARRAY_FOR_EACH
macro to make the looping more robust.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The netmask should be tied to the IPv4 address instead of being
global for the network interface.
If there is only one IPv4 address specified to the network interface,
nothing changes from user point of view. But if there are more than
one IPv4 address / network interface, the netmask must be specified
to each address separately.
This means that net_if_ipv4_get_netmask() and net_if_ipv4_set_netmask()
functions should not be used as they only work reliably if there is
only one IPv4 address in the network interface.
The new net_if_ipv4_get_netmask_by_addr() and
net_if_ipv4_set_netmask_by_addr() functions should be used as they make
sure that the netmask is tied to correct IPv4 address in the network
interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Net MGMT mask should be fully configured first, prior to be used to
initialize and add the callback.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As for adding an ipv6 address, removing one should return the same error
code when the network interface is not found.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's an optional support, and it should not select it by default.
Improving information message in case such support is disabled.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The zperf received or sent bytes length and duration are in 32bits,
if running long-duration zperf test more than 20min, the value will
overflow, and the test result is wrong. Change it to 64bits can fix
this issue.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
When the zperf command is called with '-S' option which means IP_TOS
for IPv4 and IPV6_TCLASS for IPv6, an error is printed and the
setting does not work. The socket option handling was changed by
commit 77e522a5a243('net: context: Refactor option setters'), but the
callers of option setters were not changed. This causes the IP_TOS
or IPV6_TCLASS option failed to set. The fix is to use uint8_t to
store the value of the -S option.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Allow the use of the NTP server address, set by
dhcpv4 option, by the net_init_clock_via_sntp function.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
It was an overlook to return 0 on TLS send() call, after detecting that
TLS session has been closed by peer, such a behavior is only valid for
recv(). Instead, an error should be returned.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Return error to the caller if no data was received or there
was some other error. Earlier we did not check the error
condition properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We select sockets service API in Kconfig but should select also
sockets API so that user does not need to set the sockets API separately.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The "net sockets" command did not print network management
socket information properly but claimed that the socket
was IPv4 one which it is not.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The net_mgmt socket does not support poll() or fcntl(), so
return EOPNOTSUPP error if user tries to use those functions
for AF_NET_MGMT type socket.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Check the value of net_dhcpv4_add_option_callback()
and net_dhcpv4_remove_option_callback() explicitly.
Signed-off-by: Fin Maaß <f.maass@vogl-electronic.com>
Apply ranges to DHCPv4 server timeout Kconfig options, so that it cannot
be set to a negative value by mistake.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case conflict is detected (either due to receiving Decline message or
due to ICMP probe getting reply), the conflicting address becomes
blocked for further use.
Although the RFC is not specific about how long should the address be
blocked, it make sense to implement some fallback mechanisms to reuse
blocked addresses in the server, otherwise, after longer period of
operation, it may run out of usable address.
This commit adds a timeout for declined addresses, so that by default
the address is marked back as "free" after 24 hrs (default lease time).
It also implements a mechanism, which allows to re-use the oldest
declined entry in case the server runs out of fresh addresses to assign.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
It is possible that the `sh` was not set before use.
This change adds a NULL check for `sh` in the following macros:
PR, PR_SHELL, PR_ERROR, PR_INFO, and PR_WARNING.
In case `sh` is NULL, the above macros will call `printk` instead.
Fixes#68793
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add a command `net ipv4 gateway` that allows
setting IPv4 gateway for an interface from net shell.
Signed-off-by: Mateusz Karlic <mkarlic@antmicro.com>
Add CONFIG_NET_SOCKETS_DTLS_MAX_FRAGMENT_LENGTH for limiting
the Maximum Fragment Length (MFL) for DTLS with Mbed TLS.
This is needed when MBEDTLS_SSL_OUT_CONTENT_LEN and
MBEDTLS_SSL_IN_CONTENT_LEN are set to larger values than the MTU
of the network and IP fragmentation is not supported.
Signed-off-by: Markus Lassila <markus.lassila@nordicsemi.no>
Make sure that socket service is started earlier than
config library. This is enforced in config libs init.c
but set the default value here too.
The reason for this is that the config library might need
to start dhcpv4 server which needs socket service to work,
so the ordering is important here.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If the CONFIG_NET_SOCKETS_POLL_MAX is smaller than what is needed
for the socket service API to work properly, then we should not
start the service thread as the service API cannot work and might
cause memory overwrite in ctx.events[] array.
Fixes#69233
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
