Replace function parameter 'retries' with pointer to structure
holding coap transmission parameters. This allows setting the
retransmission parameters individually for each pending request.
Add coap transmission parameters to coap_pending structure.
Update migration guide and release notes.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Use correct format specifier for LOG_ERR in lwm2m_obj_device.c. The
previously used format specifier of %u was correct for 32 bit systems
but would produce a build warning for 64 bit systems.
Fixes#66441
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
As the common.h is only meant to be used by the network
shell files, rename it to be more descriptive in order to
avoid possible conflicts with any other common.h file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add new functions to the public CoAP API to configure CoAP packet
retransmission settings. Application may need to re-configure the
settings for example when cellular modem changes connection from
LTE-M to NB-IoT or vice versa.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
When a TCP connection is established, if there is no data exchange
between the two parties within the set time, the side that enables
TCP Keep-alive will send a TCP probe packet with the same sequence
number as the previous TCP packet. This TCP probe packet is an empty
ACK packet (the specification recommends that it should not contain
any data, but can also contain 1 nonsense byte, such as 0x00.). If
there is no response from the other side after several consecutive
probe packets are sent, it is determined that the tcp connection has
failed, and the connection is closed.
The keep-alive default parameters are aligned with Linux defaults.
Signed-off-by: Horse Ma <mawei@coltsmart.com>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If observed resource was written during the pMin period, it did
not schedule any wake-up event into the future. Notify message would
then only be generated as a result of any other (like Update) event.
Refactor check_notifications() to follow same pattern as retransmit_req().
Return the next event timestamp, which could be now.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
SNTP response is not analyzed for uncertainty, and no uncertainty is given
to the `struct sntp_time` returned. Fix it with a Kconfig option that adds
optional SNTP uncertainty and timestamp fields in SNTP time struct, and
calculates these when parsing the response.
Adds two helper functions to convert Q16.16/Q32.32 in seconds to `int64_t`
in microseconds to facilitate this.
Also changes combined `lvm` field in `struct sntp_pkt` to bit-fields
`li`, `vn`, and `mode`.
Signed-off-by: Jasper Smit <git@jrhrsmit.nl>
This reverts commit 5227f24815.
The coap observer events will be replaced with net_mgmt events.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
A device can be reset before the error code list is communicated
to a LwM2M server so optionally store error list in settings so it
can restored after reset.
Signed-off-by: Nick Ward <nix.ward@gmail.com>
If server registration fails, allow fallback to secondary server,
or fallback to bootstrap.
Also allow fallback to different bootstrap server.
Add API to tell RD client when server have been disabled by
executable command.
Changes to RD state machine:
* All retry logic should be handled in NETWORK_ERROR state.
* New state SERVER_DISABLED.
* Internally disable servers that reject registration
* Temporary disable server on network error.
* Clean up all "disable timers" on start.
* Select server first, then find security object for it.
* State functions return void, error handling is done using states.
* DISCONNECT event will only come when client is requested to stop.
* NETWORK_ERROR will stop engine. This is generic error for all kinds
of registration or network failures.
* BOOTSTRAP_REG_FAILURE also stops engine. This is fatal, and we cannot
recover.
Refactoring:
* Server selection logic is inside server object.
* sm_handle_timeout_state() does not require msg parameter. Unused.
* When bootstrap fail, we should NOT back off to registration.
This is a fatal error, and it stops the engine and informs application.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
React to disable executable, as well as add callback that allows
disabling server for a period of time.
Also add API that would find a next server candidate based on the
priority and server being not-disabled.
Move all server related functions into its own header.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Zephyr has its own multicast join/leave API but for
interoperability, it is possible to use the multicast
socket API and IPV6_ADD_MEMBERSHIP and IPV6_DROP_MEMBERSHIP
socket options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Zephyr has its own multicast join/leave API but for
interoperability, it is possible to use the multicast
socket API and IP_ADD_MEMBERSHIP and IP_DROP_MEMBERSHIP
socket options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We are creating a multicast address in mDNS or LLMNR
responder so set the TTL or hoplimit using the multicast
variant API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
We specifically set TTL/hoplimit to 1 for LLMNR,
but only want to set it if in that specific case.
We must not pass TTL/hoplimit value 0 as that would
cause the packet to be dropped.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The IPv4 TTL could only manipulated via net_context interface.
It makes sense to allow the same from socket interface via
the setsockopt/getsockopt calls.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This was somehow missed, but since ICMP rework, message handlers should
not dereference the packet, as it's done by the ICMP lib.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Set the static initialiser socket file descriptor to -1 to make sure
it is invalid before using coap_service_send.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add extra checks that make sure that msg_iov is set
as we cannot receive anything if receive buffers are
not set.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The CoAP request handler returns errno codes in the following cases:
* ENOENT if no handler found; respond with 4.04
* ENOTSUP if an unknown request code received; respond with 4.00
* EPERM no handler found for the method; respond with 4.05
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Protected credential storage makes use of the PSA API, therefore it must
be present in the library include path. This was missed during the
recent CMakeLists.txt rework of this library.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If we for some reason are supplied unsupported socket type in
recvfrom(), then return ENOTSUP error to the caller instead of
silently accept it by returning 0.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If user has set either IP_PKTINFO (for IPv4) or
IPV6_RECVPKTINFO (for IPv6) socket options, then the system
will return relevant information in recvmsg() ancillary data.
Fixes#36415
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add IP_PKTINFO or IPV6_RECVPKTINFO BSD socket options that
can be used to get extra information of received data in
the ancillary data in recvmsg() call.
For IPV6_RECVPKTINFO see RFC 3542 for details.
For IP_PKTINFO see Linux ip(7) manual page for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When a client uses wildcard subscription and a new message is
published to the matching topic for the first time, the gateway
sends REGISTER message to the client, containing the exact
topic name and a new topic ID.
This change fixes adding these topic ID and name to the internal
topics list.
Signed-off-by: Alexander Vasiliev <alexander.vasiliev@siemens.com>
Add a function to MQTT-SN library API to get topic name by ID
from the internal topics list.
Signed-off-by: Alexander Vasiliev <alexander.vasiliev@siemens.com>
Added igmpv3 support based on the already existing structure for igmpv2.
The already existing api is not modified to prevent breaking exisiting
applications.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@basalte.be>
Fix the CMakeLists of the tls_credentials and sockets folders
to link/interface to the net library instead of the zephyr library.
This fixes issues where some files are not found in the link interface
when compiling the sources in this folder.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Make sure we send the entire packet buffer before bumping the packet
counter, send() does not guarantee that all of the requested data will
be sent at once with STREAM socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case underlying socket reported error while waiting for TX, the
errno value was not set accordingly. This commit fixes this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
RSRQ is the ratio between send and received signal strength and usually
understood/expected to be represented as a ratio in dB and as such always
has a negative range. So to allow RSRQ to be represented correctly the
resource must allow negative values, but currently it's limited to unsigned
8bit integers.
Signed-off-by: Henning Fleddermann <henning.fleddermann@grandcentrix.net>
Network interface numbering starts from 1, therefore when accessing
help/index array, the interface index should not be used directly, but
rather decremented by 1, to avoid out-of-bound access on those arrays.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make sure that the error message does not overflow the transmit buffer
when copying the error message string.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There's not really much to do when the transmission of the error reply
fails, but we can at least log the failure.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The result of string to float conversion in LwM2M shell write command
was not verified, which could result in incorrect data being written to
the resource.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
