It has been observed that some network drivers, f.ex. the SAM E70 GMAC,
call net_pkt_unref from inside the interrupt that signals the successful
transmission of a packet. This conflicts with the net_pkt_unref call
made by ethernet_send after the packet has been given to the driver.
We fix this by using an atomic_t to hold the reference count as there
might be other, difficult to find cases of net_pkt_(un)ref being used
across threads and interrupts.
The name of the element has been changed from "ref" to "atomic_ref" to
cause a compile error when code still has not been converted to use the
atomic_* functions.
Fixes#12708
Signed-off-by: Daniel Glöckner <dg@emlix.com>
This commit introduces a concept of mesh-local IPv6 addresses. Such
addresses should only be used for mesh-local communication, therefore
should not be used to communicate with different subnets (i. e.
destinations outside the mesh).
As `addr_type` field already holds different kind of information
(whether address was created automatically/manually) it was not used in
this case.
Instead a mesh_local flag was added, so that we do not lose information
on how address was created. Address with such flag set will only be
selected as a source address automatically if the destination address
is within the same subnet it belongs to.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
A recent change in how the fixup mechanism works caused several
regressions. See
https://github.com/zephyrproject-rtos/zephyr/pull/12680 for more
details about the regressions.
The core of the matter is that using defines to pass on include paths
causes interopability issues when integrating with external build
systems.
To resolve this we re-write the fixup mechanism to instead generate an
aggregated fixup file that is ready to be included at build time. Then
no paths are passed through defines and we resolve the regressions
reported.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This is the same as net_buf_pull(), except that instead of returning
the new buf->data it returns the old buf->data. This was recently
discussed in github issue #12562.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In some cases the Friendship & Low Power Node features aren't
available or feasible, however power saving is nevertheless required.
This patch introduces two new APIs to suspend and resume the Mesh
network. Currently, what this impacts is the LE scanning, the
ability to allocate new outgoing buffers, as well as the model
publishing, beacon and heartbeat timers.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add missing linker section to avoid warning about orphans when building
with host compiler.
Fixes#12719
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Several places in the code have constructions like this:
if (bool_variable) {
atomic_set_bit(flags, FLAG);
} else {
atomic_clear_bit(flags, FLAG);
}
To reduce the amount of code for such situations, introduce a new
atomic_set_bit_to() helper which lets you condense the above five
lines to a single one:
atomic_set_bit_to(flags, FLAG, bool_variable);
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a level 2 interrupt controller for the RV32M1 SoC. This uses the
INTMUX peripheral.
As a first customer, convert the timer driver over to using this,
adding nodes for the LPTMR peripherals. This lets users select the
timer instance they want to use, and what intmux channel they want to
route its interrupt to, using DT overlays.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Signed-off-by: Mike Scott <mike@foundries.io>
It's not an error if a driver does not implement callback related
function. Let's return -ENOTSUP relevantly.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The old legacy APIs use net-app library and as that is being
removed, then the dependencies need to be removed also.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we include this headers files in cpp source code,
the compiler say"error: template with C linkage".
Includes must be moved outside the 'extern "C"' section.
Signed-off-by: Benoit Leforestier <benoit.leforestier@sekurity.fr>
extract_dts_includes.py has been generating DT output and then
concatenating it with fixup header files to create
'generated_dts_board.h'.
In this patch we instead introduce a source file named
'generated_dts_board.h' and have it \#include the appropriate DT
output and fixup files.
This results in a simpler system because users can now read
'generated_dts_board.h' as C source code to see how fixup files and
generated DT output relate to each other. Whereas before they would
have to either read documentation or python code to gain the same
understanding.
Also, it reduces the scope and complexity of one of our most bloated
python scripts, extract_dts_includes.py.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
struct timeval is per POSIX defined in sys/time.h, but that also
allowed to pull sys/select.h (and indeed, it does with native_posix),
which then starts to conflict with out select implementation (if
NET_SOCKETS_POSIX_NAMES is defined, and many samples/tests have it).
So, for now follow the existing route of duplicating all definitions
needed by our code in namespaced manner. Things like struct timeval
usage will need to be revisited later, when we'll want socket
subsystem to work with POSIX subsystem, but that's a separate deep
matter.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
It's implemented on top of poll() anyway, and the current
implementation of fd_set uses array of fd's underlyingly, which
leads to O(n) complexity for FD_SET() and friends.
The purpose of select() implementation is to allow to perform
proof-of-concept port of 3rd-party code to Zephyr quickly. For
efficiency, poll() should be used instead.
Fixes: #11333
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Added cpu_idle APIs to a doxygen group, otherwise there were missing
from the project documentation.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some of macros initially created in the logger has been moved
to util.h. This commit replaces custom macros with the one
from util.h
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added macros for conditional code generation based on a flag.
Additionally, added macros for getting first and second argument
from variable list of arguments and getting all arguments except
the first one.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Building tests/kernel/common/kernel.common with the new crosstools
SDK-ng resulted in an orphan short read-only data section. Fix this by
adding the .srodata section to the RISC-V linker script.
Signed-off-by: Nathaniel Graff <nathaniel.graff@sifive.com>
Whether a timeout is linked into the timeout queue can be determined
from the corresponding sys_dnode_t linked state. This removes the need
to use a special flag value in dticks to determine that the timeout is
inactive.
Update _abort_timeout to return an error code, rather than the flag
value, when the timeout to be aborted was not active.
Remove the _INACTIVE flag value, and replace its external uses with an
internal API function that checks whether a timeout is inactive.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The original implementation allows a list to be corrupted by list
operations on the removed node. Existing code attempts to avoid this by
using external state to determine whether a node is in a list, but this
is fragile and fails when the state that holds the flag value is changed
after the node is removed, e.g. in preparation for re-using the node.
Follow Linux in invalidating the link pointers in a removed node. Add
API so that detection of particpation in a list is available at the node
abstraction.
This solution relies on the following steady-state invariants:
* A node (as opposed to a list) will never be adjacent to itself in a
list;
* The next and prev pointers of a node are always either both null or
both non-null.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Although sys_dnode_t and sys_dlist_t are aliases, their roles are
different and they appear in different positions in dlist API calls.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Preliminary work done towards Mesh extensions on the old LL
architecture implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added new UART API, that allows for longer transmissions, leaves
IRQ handling on driver side and allows for DMA usage.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
printk is supposed to be very lean, but should at least not
print garbage values. Now when a 64-bit integral value is
passed in to be printed, 'ERR' will be reported if it doesn't
fit in 32-bits instead of truncating it.
The printk documentation was slightly out of date, this has been
updated.
Fixes: #7179
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
15.4 MHR is no longer set in net_buf pointed by net_pkt, but in a
separate net_buf, hence we need to check that net_buf now to
determine if we need to wait for ACK or not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This adds bt_gatt_write_response_cb works similarly to
bt_gatt_notify_cb which can take a callback to be called when the PDU
is considered transmitted over the air.
Note: This can also be used to disable the ATT flow control which would
blocks sending multiple commands without wainting their transmissions.
Fixes#11558
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Legacy shell removed in order to avoid maintaining two shells
systems.
All examples and tests have been migrated to the new shell.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
This patch adds all the required hooks needed in the kernel to
get the coverage reports from x86 SoCs.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch adds all the required hooks needed in the kernel to
get the coverage reports from ARM SoCs.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch provides support for generating Code coverage reports.
The prj.conf needs to enable CONFIG_COVERAGE. Once enabled, the
code coverage data dump now comes via UART.
This data dump on the UART is triggered once the main
thread exits.
Next step is to save this data dump on file. Then run
scripts/gen_gcov_files.py with the serial console log as argument.
The last step would be be to run the gcovr. Use the following cmd
gcovr -r . --html -o gcov_report/coverage.html --html-details
Currently supported architectures are ARM and x86.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This is a custom Gcov implementation. Taking excerpts from gcc
gcc libgcc/libgcov.h and gcc/gcov-io.h.
Ported to zephyr by Ramakrishna Pallala <ramakrishna.pallala@intel.com>
and Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Modified drivers to use DEVICE_AND_API_INIT() instead of DEVICE_INIT()
This will make sure driver_api,is populated at build time and is exposed
to user space
Signed-off-by: Varun Sharma <varun.sharma@intel.com>
This commit renames the nrf5_clock_control.h and
nrf5_clock_control.c files to nrf_clock_control.h and
nrf_clock_control.c, respectively, as they are used
in nRF9160 builds, as well.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit renames the CLOCK_CONTROL_NRF5 Kconfig symbol to
CLOCK_CONTROL_NRF. The change is required to aleviates confusion
when selecting the symbol in nRF9160 SOC definition.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
When offloading is enabled, a call to inet_pton() results in a call to
zsock_inet_pton() based on its implementation in include/net/socket.h.
This eventually leads to a call to _impl_zsock_inet_pton(), which is
not defined when offloading is enabled.
In this commit, we have chosen to directly call net_addr_pton() in
inet_pton() in the offload case to be efficient, and keep the
implementation as it is when offload is not enabled.
Fixes#12441
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Add missing sections being reported as orphan with latest compiler
version for x86 and discard them. Do the same on ARM.
Those sections are used for dynamic linking which we do not support in
Zephyr.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
