k_poll does not currently allow polling on pipes. This adds support
for doing so on buffered pipes.
Signed-off-by: Jeremy Herbert <jeremy.006@gmail.com>
This new implementation of pipes has a number of advantages over the
previous.
1. The schedule locking is eliminated both making it safer for SMP
and allowing for pipes to be used from ISR context.
2. The code used to be structured to have separate code for copying
to/from a wating thread's buffer and the pipe buffer. This had
unnecessary duplication that has been replaced with a simpler
scatter-gather copy model.
3. The manner in which the "working list" is generated has also been
simplified. It no longer tries to use the thread's queuing node.
Instead, the k_pipe_desc structure (whose instances are on the
part of the k_thread structure) has been extended to contain
additional fields including a node for use with a linked list. As
this impacts the k_thread structure, pipes are now configurable
in the kernel via CONFIG_PIPES.
Fixes#47061
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
In order to bring consistency in-tree, migrate all kernel code to the
new prefix <zephyr/...>. Note that the conversion has been scripted,
refer to zephyrproject-rtos#45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Adds two routines to flush pipe objects:
k_pipe_flush()
- This routine flushes the entire pipe. That includes both
the pipe's buffer and all pended writers. It is equivalent
to reading everything into a giant temporary buffer which
is then discarded.
k_pipe_buffer_flush()
- This routine flushes only the pipe's buffer (if it exists).
It is equivalent to reading a maximum of "buffer size" bytes
into a temporary buffer which is then discarded.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Fixes a race condition in the k_pipe_cleanup() routine by adding
a spinlock. Additionally, internal counters are now reset after
freeing the buffer as the pipe has now become a bufferless pipe.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Resolves void pointer arithmetic build warnings in k_pipe_put() by
casting the pointer to a uint8_t pointer.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Remove this intrusive tracing feature in favor of the new object tracing
using the main tracing feature in zephyr. See #33603 for the new tracing
coverage for all objects.
This will allow for support in more tools and less reliance on GDB for
tracing objects.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a 'U' suffix to values when computing and comparing against
unsigned variables and other related fixes of the same MISRA rule (10.4)
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removed k_pipe_block_put and static functions only related to it.
After all the old usage of k_mem_block has been replaced by k_heap,
k_pipe_block_put still taking a deprecated k_mem_block as argument
becomes dead code. All APIs that hook it from kernel.h have been
confirmed to be removed. Since an asynchronous message descriptor
is only allocated in k_pipe_block_put, static functions for pipe_
async are removed as well.
Signed-off-by: Shihao Shen <shihao.shen@intel.com>
The mailbox and msgq utilities had API variants that could pass old
mem_pool blocks through the data structure. That API is being
deprected (and the features were obscure), so remove the internal
support.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Mark all k_mem_pool APIs deprecated for future code. Remaining
internal usage now uses equivalent "z_mem_pool" symbols instead.
Fixes#24358
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
MISRA-C Rule 5.3 states that identifiers in inner scope should
not hide identifiers in outer scope. There are a few spinlock
keys simply named "key". So rename those in inner scope to avoid
shadowing the outer ones.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
These helper functions may clarify how much data is available to read
from or write to the circular buffer of a k_pipe.
Fixes#25036
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
If timeout != K_NO_WAIT, then return immediately when not all
bytes_to_read or bytes_to_write have been transfered, but >=
min_xfer have been transferred.
Fixes#24485
Signed-off-by: Christopher Friedt <chrisfriedt@gmail.com>
Runtime initialization failed to reset the lock field, causing
problems when the pipe object is located on a stack and passed by
reference to other code. Lacking an API for initializing a spinlock
by itself use the idiom from _K_PIPE_INITIALIZER().
To simplify maintainability the initialization order is changed
slightly to match the structure field declaration order.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add a k_timeout_t type, and use it everywhere that kernel API
functions were accepting a millisecond timeout argument. Instead of
forcing milliseconds everywhere (which are often not integrally
representable as system ticks), do the conversion to ticks at the
point where the timeout is created. This avoids an extra unit
conversion in some application code, and allows us to express the
timeout in units other than milliseconds to achieve greater precision.
The existing K_MSEC() et. al. macros now return initializers for a
k_timeout_t.
The K_NO_WAIT and K_FOREVER constants have now become k_timeout_t
values, which means they cannot be operated on as integers.
Applications which have their own APIs that need to inspect these
vs. user-provided timeouts can now use a K_TIMEOUT_EQ() predicate to
test for equality.
Timer drivers, which receive an integer tick count in ther
z_clock_set_timeout() functions, now use the integer-valued
K_TICKS_FOREVER constant instead of K_FOREVER.
For the initial release, to preserve source compatibility, a
CONFIG_LEGACY_TIMEOUT_API kconfig is provided. When true, the
k_timeout_t will remain a compatible 32 bit value that will work with
any legacy Zephyr application.
Some subsystems present timeout (or timeout-like) values to their own
users as APIs that would re-use the kernel's own constants and
conventions. These will require some minor design work to adapt to
the new scheme (in most cases just using k_timeout_t directly in their
own API), and they have not been changed in this patch, instead
selecting CONFIG_LEGACY_TIMEOUT_API via kconfig. These subsystems
include: CAN Bus, the Microbit display driver, I2S, LoRa modem
drivers, the UART Async API, Video hardware drivers, the console
subsystem, and the network buffer abstraction.
k_sleep() now takes a k_timeout_t argument, with a k_msleep() variant
provided that works identically to the original API.
Most of the changes here are just type/configuration management and
documentation, but there are logic changes in mempool, where a loop
that used a timeout numerically has been reworked using a new
z_timeout_end_calc() predicate. Also in queue.c, a (when POLL was
enabled) a similar loop was needlessly used to try to retry the
k_poll() call after a spurious failure. But k_poll() does not fail
spuriously, so the loop was removed.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add runtime error checking to k_pipe_cleanup and k_pipe_get and remove
asserts.
Adapted test which was expecting a fault to handle errors instead.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Our thread struct gets initialized piecewise in a bunch of locations
(this is sort of a design flaw). The is_idle field, which was
introduced to identify idle threads in SMP (where there can be more
than one), was correctly set for idle threads but was being left
uninitialized elsewhere, and in a tiny handful of cases was turning up
nonzero.
The case in pipes. was particularly vexsome, as that isn't a thread at
all but one of the "dummy" threads used for timeouts (another design
flaw IMHO).
Get this right everywhere.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
System call arguments, at the arch layer, are single words. So
passing wider values requires splitting them into two registers at
call time. This gets even more complicated for values (e.g
k_timeout_t) that may have different sizes depending on configuration.
This patch adds a feature to gen_syscalls.py to detect functions with
wide arguments and automatically generates code to split/unsplit them.
Unfortunately the current scheme of Z_SYSCALL_DECLARE_* macros won't
work with functions like this, because for N arguments (our current
maximum N is 10) there are 2^N possible configurations of argument
widths. So this generates the complete functions for each handler and
wrapper, effectively doing in python what was originally done in the
preprocessor.
Another complexity is that traditional the z_hdlr_*() function for a
system call has taken the raw list of word arguments, which does not
work when some of those arguments must be 64 bit types. So instead of
using a single Z_SYSCALL_HANDLER macro, this splits the job of
z_hdlr_*() into two steps: An automatically-generated unmarshalling
function, z_mrsh_*(), which then calls a user-supplied verification
function z_vrfy_*(). The verification function is typesafe, and is a
simple C function with exactly the same argument and return signature
as the syscall impl function. It is also not responsible for
validating the pointers to the extra parameter array or a wide return
value, that code gets automatically generated.
This commit includes new vrfy/msrh handling for all syscalls invoked
during CI runs. Future commits will port the less testable code.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
move misc/dlist.h to sys/dlist.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/__assert.h to sys/__assert.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The k_stack data type cannot be u32_t on a 64-bit system as it is
often used to store pointers. Let's define a dedicated type for stack
data values, namely stack_data_t, which can be adjusted accordingly.
For now it is defined to uintptr_t which is the integer type large
enough to hold a pointer, meaning it is equivalent to u32_t on 32-bit
systems and u64_t on 64-bit systems.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Given that the section name and boundary simbols can be inferred from
the struct object name, it makes sense to create an iterator that
abstracts away the access details and reduce the possibility for
mistakes.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
One spinlock per pipe object. Also removed some vestigial locking
around _ready_thread(). That call is internally synchronized now.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Just like with _Swap(), we need two variants of these utilities which
can atomically release a lock and context switch. The naming shifts
(for byte count reasons) to _reschedule/_pend_curr, and both have an
_irqlock variant which takes the traditional locking.
Just refactoring. No logic changes.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These files were using z_thread_malloc() without including
kernel_internal.h. On existing architectures that works due to
transitive includes, but x86_64 has a thinner include layer and
doesn't do it for us. Include the files required for the APIs we use.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
According with MISRA-C an object should be defined in a block scope if
it is used in a single function.
MISRA-C rule 8.9
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Under GNU C, sizeof(void) = 1. This commit merely makes it explicit u8.
Pointer arithmetics over void types is:
* A GNU C extension
* Not supported by Clang
* Illegal across all ISO C standards
See also: https://gcc.gnu.org/onlinedocs/gcc/Pointer-Arith.html
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Make while statement using pointers explicitly check whether
the value is NULL or not.
The C standard does not say that the null pointer is the same
as the pointer to memory address 0 and because of this is a good
practice always compare with the macro NULL.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Make if statement using pointers explicitly check whether the value is
NULL or not.
The C standard does not say that the null pointer is the same as the
pointer to memory address 0 and because of this is a good practice
always compare with the macro NULL.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Checking the return of some scattered functions across kernel.
MISRA-C requires that all non-void functions have their return value
checked, though, in some cases there is nothing to do. Just
acknowledging it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
There are some cases that there is nothing to do with
_pend_current_thread() return (that is _Swap return value).
As MISRA-C requires that all non-void functions have their
return value checked, we are explicitly ignoring it when there is
nothing to do.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
If k_pipe_block_put() is called and the pipe does not have enough
space to accomodate all the data in the memory pool, the subsequent
get operation will cause a CPU fault. The CPU fault is caused by
the timeout struct in the dummy thread not being initialized and
thus the scheduler will read bad memory. After fixing this,
another issue came up where the get operation would stall with
k_pipe_block_put() in same situation. This is due to the async
descriptor not being setup correctly. So fix this too.
This was discovered when debugging #9273.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
These assertions snuck through in crossed pull requests. There's a
specific API for _wait_q_t now, you can't hit the list directly
(because it might be a tree).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This replaces the existing scheduler (but not priority handling)
implementation with a somewhat simpler one. Behavior as to thread
selection does not change. New features:
+ Unifies SMP and uniprocessing selection code (with the sole
exception of the "cache" trick not being possible in SMP).
+ The old static multi-queue implementation is gone and has been
replaced with a build-time choice of either a "dumb" list
implementation (faster and significantly smaller for apps with only
a few threads) or a balanced tree queue which scales well to
arbitrary numbers of threads and priority levels. This is
controlled via the CONFIG_SCHED_DUMB kconfig variable.
+ The balanced tree implementation is usable symmetrically for the
wait_q abstraction, fixing a scalability glitch Zephyr had when many
threads were waiting on a single object. This can be selected via
CONFIG_WAITQ_FAST.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There were multiple spots where code was using the _wait_q_t
abstraction as a synonym for a dlist and doing direct list management
on them with the dlist APIs. Refactor _wait_q_t into a proper opaque
struct (not a typedef for sys_dlist_t) and write a simple wrapper API
for the existing usages. Now replacement of wait_q with a different
data structure is much cleaner.
Note that there were some SYS_DLIST_FOR_EACH_SAFE loops in mailbox.c
that got replaced by the normal/non-safe macro. While these loops do
mutate the list in the code body, they always do an early return in
those circumstances instead of returning into the macro'd for() loop,
so the _SAFE usage was needless.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The various macros to do checks in system call handlers all
implictly would generate a kernel oops if a check failed.
This is undesirable for a few reasons:
* System call handlers that acquire resources in the handler
have no good recourse for cleanup if a check fails.
* In some cases we may want to propagate a return value back
to the caller instead of just killing the calling thread,
even though the base API doesn't do these checks.
These macros now all return a value, if nonzero is returned
the check failed. K_OOPS() now wraps these calls to generate
a kernel oops.
At the moment, the policy for all APIs has not changed. They
still all oops upon a failed check/
The macros now use the Z_ notation for private APIs.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
