This was missed in earlier that tried to fix all string comparisons to
use case insensitive comparison.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The help text was incorrect, we return -ETIMEDOUT instead
of -ECONNRESET when retransmission timeout occurs.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
In AP mode maintain the database of connected stations based on the
Wi-Fi management events and dump the list.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
These are helpful to track clients being added and deleted.
Applications can actions based on these events.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
These events communicate the status of AP mode operations (enable or
disable) with few pre-defined enumerations.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Update the example of scan -c argument.
Default value for max channels is set to 3,
So, update the example according to that.
Add closing bracket in -s.
Signed-off-by: Kapil Bhatt <kapil.bhatt@nordicsemi.no>
Adding a callback for handling lwm2m messages with prefixed paths defined
by the gateway object. If CONFIG_LWM2M_GATEWAY_OBJ_SUPPORT is set,
each path is checked for the prefix stored in the object instances of the
gateway object 25. If prefixes match the msg is passed to the gw_msg_cb.
Signed-off-by: Simon Walz <simon.walz@autosen.com>
__bswap_ in zephyr/sys/byteorder.h conflicts with __bswap_ in host's
byteswap.h. byteswap.h from host compiler used in posix_native_64 boards
causes a compilation issue.
This commit renames __bswap_ to BSWAP_ to prevent collision.
Before this commit a compilation error can be created by adding #include
<byteswap.h> to samples/net/sockets/echo/src/socket_echo.c
This does not change external API to byteorder.h, but does change
internal implementation which some other source files depend on.
Replaced manual byteswap operations in devmem_service.c with APIs from
byteorder.h which automatically converts to CPU endianess when necessary.
Fixes#44324
Signed-off-by: Jonathan Hamberg <jonathanhamberg@gmail.com>
Add a function callback that is called when the TCP connection
is closed. This is only available if doing network tests.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The FIN timer was not set when we entered the FIN_WAIT_1 state.
This could cause issues if we did not receive proper packets
from peer. With this fix, the connection is always terminated
even if peer does not respond.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If we are in a passive close state, then it is possible that
the ack we are waiting is lost or we do not accept the one peer
sent to us because of some earlier out of memory issue.
So install a timer (using by default the FIN timer value) to
close the connection if the last ack is not received on time.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The help text uses the capital case as its an acronym, but passing
capital case fails. Also extend that to others as well.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
For better readability, below rules will help:
* Each command should be separated by a newline
* Each command should end with a full stop (intermediate statements
shouldn't have full stops)
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
We are using standard notation to differentiate optional and mandatory,
so, no need for a heading.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
lwm2m_engine_pause() caused deadlock if it was called within
engine thread.
Remove while loop from lwm2m_engine_resume().
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Add short delay before triggering registration update. This allows
postponing the update from application side if needed.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
DTLS socket is not really connection-less as UDP, as it required the
DTLS handshake to take place before the socket is usable. Therefore,
align the DTLS connect() behavior with regular TLS.
The change is backward compatible. connect() call is still optional for
DTLS socket (the handshake can still take place from send()/recv()) and
a socket option was provided to disable DTLS handshake on connect().
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When using DTLS socket, the application may choose to monitor socket
with poll() before handshake has been complete. This could lead to
potential crash (as the TLS context may have been left uninitialized)
and unexpected POLLIN reports (while handshake was still not complete).
This commit fixes the above - POLLIN will only be reported once
handshake is complete and data is available
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case a socket error was caused by TLS layer, it was not reported with
POLLERR. This commit fixes this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case TLS session is closed at the TLS level (and thus recv() reports
0 to the application) a certain race occurs between consecutive recv()
call, and TCP session teardown. As mbedtls_ssl_read() only reports
session close upon receiving CLOSE alert, consecutive non-blocking
recv() calls would report EAGAIN instead of connection closed, if called
before underlying TCP connection was closed.
Fix this, by storing the information that TLS session has ended at TLS
socket level. The new flag will be checked before attempting further
mbed TLS actions, so that connection status is reported correctly.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If we receive a IPv4 packet to v4 mapped address, the relevant
net_context is bound to IPv6. This causes issues if we try
to get the family from the context struct in sendto.
Fix this by checking if the destination address is IPv4 but
the socket is bound to IPv6 and v4 mapping is enabled.
If all these criterias are set, then set the family of the
packet separately and do not get it from net_context.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Make sure iovec is initialized to a value so that there
is no possibility that it is accessed uninitialized.
Fixes: #66838
Coverity-CID: 334911
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The original idea was to check that we have enough network
interfaces in the system. The check needs to verify max IPv4
and IPv6 supported interfaces instead of always checking
IPv6 one.
Fixes: #66843
Coverity-CID: 334899
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Refactored the socket state indication into its own function
that checks the state of TX queues as well as number of
pending CoAP responses.
Check the state after receiving a packet, as it might
have been a last Ack packet we have been waiting.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Deprecate lwm2m_set_u64() and lwm2m_get_u64 as only
LWM2M_RES_TYPE_S64 exist. Unsigned variant is not defined.
Technically these might have worked OK, but it is undefined
what happens to large unsigned values when those are
converted to various payload formats (like CBOR) that might
decode numbers differently depending of their signedness.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Any received address is no longer valid once the interface goes down.
Leaving the address assigned results in the L4 interface transitioning
through the following on reconnection:
UP: Interface is connected
DOWN: Old address is removed by DHCP
UP: New address is re-added by DHCP
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Networking events are masks of bits, which are almost impossible to read
as decimal, and trivial to read as hex. Also unifies the format string
across multiple outputs for some flash savings.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
If we receive a packet where the source address is our own
address, then we should drop it.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If we receive a packet from non localhost interface, then
drop it if either source or destination address is a localhost
address.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow engine to give hints about ongoing CoAP transmissions.
This information can be used to control various power saving
modes for network interfaces. For example cellular networks might
support release assist indicator.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
In slow networks, like Nb-IOT, when using queue mode,
there might be significant delay between the time we
put the packet into a transmission queue and the time
we actually start transmitting.
This might cause QUEUE_RX_OFF state to be triggered earlier
than expected. Remedy the issue by updating the timestamp on the
moment where packet is accepted by zsock_send().
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
In case a waiting TLS socket reports an error in the underlying poll
call, try to read the actual error from the socket, instead of blindly
returning -EIO in all cases.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There are several subsystems and boards which require a relatively large
system heap (used by k_malloc()) to function properly. This became even
more notable with the recent introduction of the ACPICA library, which
causes ACPI-using boards to require a system heap of up to several
megabytes in size.
Until now, subsystems and boards have tried to solve this by having
Kconfig overlays which modify the default value of HEAP_MEM_POOL_SIZE.
This works ok, except when applications start explicitly setting values
in their prj.conf files:
$ git grep CONFIG_HEAP_MEM_POOL_SIZE= tests samples|wc -l
157
The vast majority of values set by current sample or test applications
is much too small for subsystems like ACPI, which results in the
application not being able to run on such boards.
To solve this situation, we introduce support for subsystems to specify
their own custom system heap size requirement. Subsystems do
this by defining Kconfig options with the prefix HEAP_MEM_POOL_ADD_SIZE_.
The final value of the system heap is the sum of the custom
minimum requirements, or the value existing HEAP_MEM_POOL_SIZE option,
whichever is greater.
We also introduce a new HEAP_MEM_POOL_IGNORE_MIN Kconfig option which
applications can use to force a lower value than what subsystems have
specficied, however this behavior is disabled by default.
Whenever the minimum is greater than the requested value a CMake warning
will be issued in the build output.
This patch ends up modifying several places outside of kernel code,
since the presence of the system heap is no longer detected using a
non-zero CONFIG_HEAP_MEM_POOL_SIZE value, rather it's now detected using
a new K_HEAP_MEM_POOL_SIZE value that's evaluated at build.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This reverts commit 6b644dff67.
Reason: breaks Peer-to-Peer gPTP connection. A better solution should be
found to handle the optional TLV on the announce message (chapter 10.5.1
IEEE 802.1AS-2011)
Signed-off-by: Mario Paja <mario.paja@zal.aero>
Zephyr does not support MLDv1 (which has a shorter header than MLDv2),
and this resulted in log errors being printed on header access if MLDv1
queries were received. Since receiving such packet is not really an
error, just drop it silently.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
