RT platforms that support TRNG IP (rt10xx and rt6xx) need to set
RNG and CSRNG to Xoroshiro and CTR_DRBG respectively instead of
using TRNG as random source.
Fixes: #37307
Signed-off-by: David Leach <david.leach@nxp.com>
Deprecate the xoroshiro128+ PRNG algorithm in favour of xoshiro128++.
xoshiro128++ is a drop-in replacement which is invisible from the user
perspective.
xoroshiro128+ is unsuitable because it is explicitly a floating-point
PRNG, not a general-purpose PRNG. This means that the lower 4 bits of
the output are actually linear, not random (from the designers,
https://prng.di.unimi.it/). This means 1/8th of the generated data is
not random.
Additionally, xoroshiro128+ is not a 32bit algorithm, it operates on
64bit numbers. For the vast majority of Zephyr devices, this makes the
PRNG slower than it needs to be. The replacement (xoshiro128++) is
32bit, with no loss in state space (still 128 bit).
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Instead of passing target states, use actions for device PM control.
Actions represent better the meaning of the callback argument.
Furthermore, they are more future proof as they can be suitable for
other PM actions that have no direct mapping to a state. If we compare
with Linux, we could have a multi-stage suspend/resume. Such scenario
would not have a good mapping when using target states.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Return -ENOTSUP if the requested state is not supported
- Remove redundant "noop style" functions.
- Use switch everywhere to handle requested state (not necessary in all
drivers, but better take off with consistency in place after current
changes).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The device PM control function will only be called if the requested
state is different from the current one. A significant amount of drivers
were checking for state changes, now unnecessary. This patch removes all
this redundant logic.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since the state is no longer modified by the device PM callback, just
use the state value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The callback is now invoked to set the device PM state in all cases, so
the usage of ctrl_command is redundant.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The device PM subsystem already holds the device state, so there is no
need to keep duplicates inside the device. The pm_device_state_get has
been refactored to just return the device state. Note that this is still
not safe, but the same applied to the previous implementation. This
problem will be addressed later.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
According to the Reference Manual of several series(G0,L5,WL,WB,...)
RNG_DR register value should only be used if it is different from 0:
"Because when it is the case a seed error occurred between RNG_SR
polling and RND_DR output reading (rare event)."
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit introduces an automatic recovery procedure in cases an
entropy source error was detected.
- On Series with soft reset support a soft rest is executed.
- On Series w/o soft reset support the pipeline is cleared by reading
the RNG_DR 12 times.
With this changes the check for seed errors uses SEIS flag instead
of the SECS flag.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds entropy support for stm32wl and stm32g0.
Pll is used as clock source and has to be enabled,
other clock sources are not supported at the moment.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
The callback is not used anymore, so just delete it from the pm_control
callback signature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
the device PM callback is not used anymore by the device PM subsystem,
so remove it from all drivers/tests using it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit selects LL_RCC_RNG_CLKSOURCE_CLK48 as a clock source
to rng peripheral. LL_RCC_RNG_CLKSOURCE_CLK48 is CLK48 divided by 3.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Move all PM_DEVICE_STATE_* definitions to an enum. The
PM_DEVICE_STATE_SET and PM_DEVICE_STATE_GET definitions have been kept
out of the enum since they do not represent any state. However, their
name has not been changed since they will be removed soon.
All drivers and tests have been adjusted accordingly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The context parameter used across device power management is
actually the power state. Just use it and avoid a lot of
unnecessary casts.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Function random_byte_get() returns only the least significant byte of
the 32-bit random datum, as this is the used value, so avoiding that
higher numbers are interpreted as negative error codes and their value
is not discarded.
Signed-off-by: Giancarlo Stasi <giancarlo.stasi.co@gmail.com>
Convert from device_get_binding to DEVICE_DT_GET. In doing this we
no longer need the label in the devicetree node so we remove that.
Removed all __ASSERT_NO_MSG(clk) since we'll get a build error if
DEVICE_DT_GET cant be satisfied, and the clock control api's will
handle reporting if the device_is_ready.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove conditionals (PM_DEEP_SLEEP_STATES and PM_SLEEP_STATES) from
power management code. Now these features are always available when
power management is enabled.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Migrate the whole pm subsystem to use new power states information
from power_state.h and get states and residency properties from
device tree.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Now that we generate a header that extern's all possible devicetree
based device struct we can remove DEVICE_DT_DECLARE and
DEVICE_DT_INST_DECLARE as they aren't needed anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
core-macros.h includes other files not part of the xtensa HAL, make this
esp32 specific
Fixes#31301
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Convert entropy drivers to use new DT variants of the DEVICE APIs.
DEVICE_AND_API_INIT -> DEVICE_DT_DEFINE
DEVICE_GET -> DEVICE_DT_GET
etc..
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For drivers that support CONFIG_DEVICE_POWER_MANAGEMENT there are some
cases that look like:
#ifdef CONFIG_DEVICE_POWER_MANAGEMENT
DEVICE_DEFINE()
#else
DEVICE_AND_API_INIT()
#endif
There is no need to special case this as the pm_control_fn argument to
DEVICE_DEFINE will just be ignored in the
!CONFIG_DEVICE_POWER_MANAGEMENT case. So we can cleanup the code a
little and remove the #else cases for the drivers that do this.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
"unused value" issue reported by Coverity (CID: 214211).
This is actually a true bug as reported error is erased
and not taken into account.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Due to HSEM implementation #24862, USB CLK48 lock implementation
#25850 should be reworked.
And by the way, implement the same in entropy which is using the
same clock.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
RCC_HSI48_SUPPORT is not always defined even if SOC support HSI48.
Ex: STM32H7 family which support HSI48 but doesn't have
switch RCC_HSI48_SUPPORT.
This switch is usefull when in the same STM32 family some soc have
HSI487 and some other soc not.
So instead, use CMSIS register defines (which depends on family)
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
