Set total priorities to 71.
This setting already exceeds original limit(32) and exceeds 64 to test
secondary bitmap.
Signed-off-by: TaiJu Wu <tjwu1217@gmail.com>
The commit disables QSPI in SoC configurations, as QSPI got enabled
by default and test never really run on SoC.
In QSPI configuration erase page size is set to 4096
There is not TC_PRINT showing name of device that the test will
run on, in test setup.
The nrf52840dk configuration files have been renamed to reflect
dk name and SoC.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Allow all tests which run in the real nrf52840 to also
run in the simulated nrf52_bsim.
That way we will have runtime tests in CI.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add a DT overlay so this test can also be run in the nrf52_bsim
simulated board.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Enable i2c1 on nucleo_h563zi (arduino_i2c).
Additionally provide a test configuration for i2c_target_api.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
One of these tests has been seen failing in older slower
computers due to timeouts, let's increase the timeout so
we don't break in those cases.
Note this timeout is just a safety to eventually kill
hung simulations even if nobody presses Ctrl+C.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This test has been seen failing in older slower computers
due to timeouts, let's increase the timeout so we don't
break in those cases.
Note this timeout is just a safety to eventually kill
hung simulations even if nobody presses Ctrl+C.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This test has been seen failing in older slower computers
due to timeouts, let's increase the timeout so we don't
break in those cases.
Note this timeout is just a safety to eventually kill
hung simulations even if nobody presses Ctrl+C.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
On nRF54H20, we need to configure RAM with execution permissions in
order to execute code from it. This patch adds overlays for the nRF54H20
PDK cpuapp cores so that RAM0X region is given execution permissions and
so the test runs successfully.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Enable testing of all bitrates for all drivers and report which bitrates
are not supported by the CAN controller under test.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
It turns out the deadline scheduling and the scalable scheduling
backend didn't work right together (for almost six years!) because we
never had coverage of that combination. Add it explicitly given the
known issue in #69935.
We might want to consider adding a whole CI target with SCALABLE=y,
which we've done for other common tunables to get coverage.
Signed-off-by: Andy Ross <andyross@google.com>
Adds i2c3 on the dts of nucleo_f401re.
Adds necessary overlay and nucleo_f401re in i2c_target_api test case
to enable the board.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
Fix for test that was failing due to incorrectly testing of
stream_flash_erase_page.
The stream_flash_erase_page would never be able to erase a page
it has been requested to erase.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The fix is to check if any of the adv set's rpa expired
callback returns false, then all adv sets continues with
the old RPA.
Note: Fix is applicable only to adv sets which shares the
same id.
Signed-off-by: Nithin Ramesh Myliattil <niym@demant.com>
Skip the "test_can_dtiming" test case if CONFIG_CAN_FD_MODE is not enabled,
not the "test_can_timing_missing_value" test case.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Commit adds const qualifier to models metadata.
Specification claims: Composition Metadata Page 0
shall not change during a term of a node on the network.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The simple test is there to test the API and simple extensions in
unison. Hello world was intended to be the first not the only extension
being tested.
Also refactors the entry thread to allow for usermode potentially by
passing the pointer to the function symbol rather than having it look it
up directly.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Add build_only for the st,stm32-ethernet driver to the build_all
ethernet tests and add an entry for ethernet support to make sure
ethernet driver is built.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Use the native_sim board to build ethernet drivers for spi devices and
add an entry for the default testcase.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This will help to detect any issues with duplicate handlers, currently,
it causes an infinite loop in the handler that processes the single
linked list.
Also, increase the stack size to pass the synchronous test case.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Set the minimal RAM requirement for the test variant, so that it does
not get built for platforms it won't fit anyway.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Enabled the PIT and Multi channel support
for some of the rtXXXX devices.
- rt1010
- rt1060
- rt1160
- rt1170
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Updating the nxp,pit driver to support mutliple
channels. Updating the dts and board overlays
to account for the changes.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Replaces the use of z_pend_curr_irqlock() with z_pend_curr()
as the former is not used anywhere else anymore.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Update all usages of the MBOX API to the latest API changes (to be
squashed for bisectability).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Some pieces of code were missing proper guards for Kconfig
values, which could cause compile issues
The massive amount of #if in bap.c clearly indicates that the
file should be split, as it contains many things that are specific
for various roles.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add support for vendor specific Set Scan Request Reports command and
Scan Request Received Event, available for legacy advertising.
Signed-off-by: Giancarlo Stasi <giancarlo.stasi.co@gmail.com>
