In SMP, the system timer is used for timeslicing on auxiliary CPUs,
but the base system timekeeping via _nano_sys_clock_tick_announce() is
still done on CPU0 only (because the framework isn't prepared for
asynchronous notification yet). Skip processing on CPU1+.
Also, due to a hardware interaction* that is difficult to work around,
timer initialization on the auxiliary CPUs is done at the very end of
the CPU bringup, just before the swap into the scheduler. A
smp_timer_init() API has been added for this purpose.
* On ESP-32, enabling the timer seems to result in a near-synchronous
interrupt being delivered despite my best attempts to keep it
masked, then blowing things up because the CPU record isn't set up
to handle it yet.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This change proposes to handle the case where the handle_timeouts
function is called after a number of ticks greater than the first
timeout delta of the _timeout_q list. In the current implementation if
the case occurs, after subtracting the number of ticks the
delta_ticks_from_prev field becomes negative and the first timeout is
never processed. It is therefore necessary to treat this case and to
prevent delta_ticks_from_prev from becoming negative. Moreover, the lag
produced by the initial delay must also be applied to following timeouts
by browsing the list until it was entirely consumed.
Fixes#5401
Signed-off-by: Holman Greenhand <greenhandholman@gmail.com>
Use some preprocessor trickery to automatically deduce the amount of
arguments for the various _SYSCALL_HANDLERn() macros. Makes the grunt
work of converting a bunch of kernel APIs to system calls slightly
easier.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
We now have macros which should significantly reduce the amount of
boilerplate involved with defining system call handlers.
- Macros which define the proper prototype based on number of arguments
- "SIMPLE" variants which create handlers that don't need anything
other than object verification
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The kernel tracks time slice usage with the _time_slice_elapsed global.
Every time the timer interrupt goes off and the timer driver calls
_nano_sys_clock_tick_announce() with the elapsed time, this is added to
_time_slice_elapsed. If it exceeds the total time slice, the thread is
moved to the back of the queue for that priority level and
_time_slice_elapsed is reset to zero.
In a non-tickless kernel, this is the only time _time_slice_elapsed is
reset. If a thread uses up a partial time slice, and then cooperatively
switches to another thread, the next thread will inherit the remaining
time slice, causing it not to be able to run as long as it ought to.
There does exist code to properly reset the elapsed count, but it was
only compiled in a tickless kernel. Now it is built any time
CONFIG_TIMESLICING is enabled.
Issue: ZEP-2107
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Adds event based scheduling logic to the kernel. Updates
management of timeouts, timers, idling etc. based on
time tracked at events rather than periodic ticks. Provides
interfaces for timers to announce and get next timer expiry
based on kernel scheduling decisions involving time slicing
of threads, timeouts and idling. Uses wall time units instead
of ticks in all scheduling activities.
The implementation involves changes in the following areas
1. Management of time in wall units like ms/us instead of ticks
The existing implementation already had an option to configure
number of ticks in a second. The new implementation builds on
top of that feature and provides option to set the size of the
scheduling granurality to mili seconds or micro seconds. This
allows most of the current implementation to be reused. Due to
this re-use and co-existence with tick based kernel, the names
of variables may contain the word "tick". However, in the
tickless kernel implementation, it represents the currently
configured time unit, which would be be mili seconds or
micro seconds. The APIs that take time as a parameter are not
impacted and they continue to pass time in mili seconds.
2. Timers would not be programmed in periodic mode
generating ticks. Instead they would be programmed in one
shot mode to generate events at the time the kernel scheduler
needs to gain control for its scheduling activities like
timers, timeouts, time slicing, idling etc.
3. The scheduler provides interfaces that the timer drivers
use to announce elapsed time and get the next time the scheduler
needs a timer event. It is possible that the scheduler may not
need another timer event, in which case the system would wait
for a non-timer event to wake it up if it is idling.
4. New APIs are defined to be implemented by timer drivers. Also
they need to handler timer events differently. These changes
have been done in the HPET timer driver. In future other timers
that support tickles kernel should implement these APIs as well.
These APIs are to re-program the timer, update and announce
elapsed time.
5. Philosopher and timer_api applications have been enabled to
test tickless kernel. Separate configuration files are created
which define the necessary CONFIG flags. Run these apps using
following command
make pristine && make BOARD=qemu_x86 CONF_FILE=prj_tickless.conf qemu
Jira: ZEP-339 ZEP-1946 ZEP-948
Change-Id: I7d950c31bf1ff929a9066fad42c2f0559a2e5983
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types. This handles the remaining includes and kernel, plus
touching up various points that we skipped because of include
dependancies. We also convert the PRI printf formatters in the arch
code over to normal formatters.
Jira: ZEP-2051
Change-Id: Iecbb12601a3ee4ea936fd7ddea37788a645b08b0
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This reverts commit 7b9dc107a8.
We revert this as we intent to move away from {u}int{8,16,32,64}_t types
to our own internal types for sized variables so we shouldn't need the
PRI macros anymore.
Change-Id: I1d9d797fee47ca266867ae65656c150f8fe2adb2
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To allow for various libc implementations (like newlib) in which the way
various {u}int{8,16,32}_t types are defined vary between both libc
implementations and across architectures we need to utilize the PRI
defines.
Change-Id: Ie884fb67015502288152ecbd64c37961a4f538e4
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Queuing in the timeout_q of timeouts expiring on the same tick queue
them in reverse order: as soon as the new timeout finds a timeout
expiring on the same tick or later, it get prepended to that timeout:
this allows exiting the traversal of the timeout as soon as possible,
which is done with interrupts locked, thus reducing interrupt latency.
However, this has the side-effect of handling the timeouts expiring on
the same tick in the reverse order that they are queued.
For example:
thread_c, prio 4:
uint32_t uptime = k_uptime_get_32();
while(uptime == k_uptime_get_32()); /* align on tick */
k_timer_start(&timer_a, 5, 0);
k_timer_start(&timer_b, 5, 0);
thread_a, prio 5:
k_timer_status_sync(&timer_a);
printk("thread_a got timer_a\n");
thread_b, prio 5:
k_timer_status_sync(&timer_b);
printk("thread_b got timer_b\n");
One could "reasonably" expect thread_a to run first, since both threads
have the same prio, and timer_a was started before timer_b, thus
inserted first in the timeout_q first (time-wise). However, thread_b
will run before thread_a, since timer_b's timeout is prepended to
timer_a's.
This patch keeps the reversing of the order when adding timeouts in the
timeout_q, thus preserving the same interrupt latency; however, when
dequeuing them and adding them to the expired queue, we now reverse that
order _again_, causing the timeouts to be handled in the expected order.
Change-Id: Id83045f63e2be88809d6089b8ae62034e4e3facb
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some tick frequencies lend themselves to optimized conversions from ms
to ticks and vice-versa.
- 1000Hz which does not need any conversion
- 500Hz, 250Hz, 125Hz where the division/multiplication are a straight
shift since they are power-of-two factors of 1000.
In addition, some more generally used values are made to use optimized
conversion equations rather than the generic one that uses 64-bit math,
and often results in calling compiler intrinsics.
These values are: 100Hz, 50Hz, 25Hz, 20Hz, 10Hz, 1Hz (the last one used
in some testing).
Avoiding the 64-bit math intrisics has the additional benefit, in
addition to increased performance, of using a significant lower amount
of stack space: 52 bytes on ARM Cortex-M and 80 bytes on x86.
Change-Id: I080eb338a2637d6b1c6838c119af1a9fa37fe869
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This limits the execution contexts that will go over the loop in
_unpend_first_thread() to only ISRs of very high priority that are
preempting the system clock timer ISR, and only during the time it is
handling timeouts.
Change-Id: Iaf0500d28a2de5e077c9cf9861a5a70244127d58
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Also remove mentions of unified kernel in various places in the kernel,
samples and documentation.
Change-Id: Ice43bc73badbe7e14bae40fd6f2a302f6528a77d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2016-12-19 14:59:35 -05:00
Renamed from kernel/unified/sys_clock.c (Browse further)
