These have been removed from the tree. Warn out of tree users about
support for them eventually being removed entirely.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Added support for creating an assembly listing containing all sections
like rodata, data and debug sections, not just those expected to
contain instructions.
Signed-off-by: Rohit Gujarathi <gujju.rohit@gmail.com>
To allow samples to obtain `ZEPHYR_<MODULE_NAME>_MODULE_DIR` it is
necessary to also ensure the module variable is available in parent
scope.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add a CONFIG_TIMEOUT_64BIT kconfig that, when selected, makes the
k_ticks_t used in timeout computations pervasively 64 bit. This will
allow much longer timeouts and much faster (i.e. more precise) tick
rates. It also enables the use of absolute (not delta) timeouts in an
upcoming commit.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Custom commands must depend on both the input files and the wrapper
targets for the input files.
See Sam Thursfield's blog post about "CMake: dependencies between
targets and files and custom commands" for why.
This fixes#23562
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
OBJ_LIST depends on ZEPHYR_PREBUILT_EXECUTABLE which again
transitively depends on PARSE_SYSCALLS_TARGET, so adding this
dependency is unnecessary.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
With the introduction of ZephyrConfig.cmake all parts of CMake code
should rely on the CMake ZEPHYR_BASE variable instead of the environment
setting.
This ensures that after the first CMake invocation, then all subsequent
invocation in same build folder will use same zephyr base.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
To complete the removal of the ext/ folder, move the ctf_map.h file to
where it really belongs, which is subsys/tracing/ctf.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This never needed to be put in a separate gperf table.
Privilege mode stacks can be generated by the main
gen_kobject_list.py logic, which we do here.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Private type, internal to the kernel, not directly associated
with any k_object_* APIs. Is the return value of z_object_find().
Rename to struct z_object.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Actual files make terrible dependency targets in CMake.
Wrap the generation of subsystems.json into a custom
target to get around this. Fixes a problem where
parse_syscalls.py was being called multiple times.
Fixes: #23504
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This change extends the parse_syscalls.py script to scan for a
__subsystem sentinal added to driver api declarations. It thens
generates a list that is passed into gen_kobject_list.py to extend
the subsystems list. This allows subsystems to be declared in the
code instead of a separate python list and provides a mechanism for
defining out-of-tree subsystems.
Signed-off-by: Corey Wharton <coreyw7@fb.com>
gperf is only used when CONFIG_USERSPACE is enabled. Users that use
arch's that don't support CONFIG_USERSPACE, or happen to not never
enable CONFIG_USERSPACE should not be artificially required to install
gperf.
This change makes gperf optional by moving it's presence-check to it's
usage.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
All SoCs must now 'select' one of the CONFIG_<arch> symbols. Add an
ARCH_IS_SET helper symbol that's selected by the arch symbols and
checked in CMake, printing a warning otherwise.
Might save people some time until they're used to the new scheme.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Before C sources can be compiled any generated header that they
include must be generated. Currently, the target 'offsets_h' happens
to depend directly or indirectly on all generated headers.
This means that to compile safely, one can simply depend on
'offsets_h'. But this is coincidental and might not be true in the
future.
To be able to safely depend on a target that represents all generated
headers being ready we introduce the target
'zephyr_generated_headers'.
Any third-party build scripts can now safely depend on
'zephyr_generated_headers' and be protected from any internal changes
to the build system, like the removal of offsets_h.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Files that need something from this directory should be using the
prefix, e.g. <drivers/sensor.h> instead of just <sensor.h>.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add an opt-in feature that will generate a Makefile with build
variables like CC, and KBUILD_CFLAGS for consumption by third-party
Make-based build systems.
This emulates the 'outputexports' target that KBuild supported and is
supported for the same reasons that KBuild supported it. Easier
integration with third-party build systems.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Introduce the CMake variable SYSCALL_INCLUDE_DIRS to support
out-of-tree syscall declarations.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
generated_dts_board.h is pretty redundant and confusing as a name. Call
it devicetree.h instead.
dts.h would be another option, but DTS stands for "devicetree source"
and is the source code format, so it's a bit confusing too.
The replacement was done by grepping for 'generated_dts_board' and
'GENERATED_DTS_BOARD'.
Two build diagram and input-output SVG files were updated as well, along
with misc. documentation.
hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml
update.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Adding a Kconfig parameter so that we can indicate an SoC is to be
deprecated, similar to what is being done for BOARD_DEPRECATED_RELEASE.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
This commit restores the old behaviour of locating Zephyr modules under
CMAKE_BINARY_DIR instead of CMAKE_CURRENT_BINARY_DIR during building of
Zephyr modules.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Prior to this all hex files included in a merge would
be printed on every invokation of cmake.
Allow the user to explicitly require this information
by moving the print to a VERBOSE-only cmake message.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
The check introduced in #18777 uses incorrect CMake syntax.
IN_LIST requires the list variable name, not its content.
Signed-off-by: Jack Dähn <jack@jkdhn.me>
The warning about CONFIG_ASSERT being enabled is too loud. This patch
reduces it's verbosity and omits the explanation about performance as
this is believed to be obvious.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This commit removes the hard coded mbed TLS library name
`lib..__modules__crypto__mbedtls.a` in top-level CMakeLists.txt file
and instead uses zephyr_library_app_memory function.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit introduces the variable:
ZEPHYR_${MODULE}_MODULE_DIR that can be used for modules to obtain
locations of other modules.
As example: a module which requires the knowledge of mcuboot con now
fetch this information using ZEPHYR_MCUBOOT_MODULE_DIR.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The start/stop functions do a whole pile of supervisor-
only stuff; resolve this by making them ztest-specific
system calls.
Fixes: #20927
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
gen_syscall_header.py is not longer necessary, it was just creating a
file including syscall.h. This header is now included directly by
gen_syscalls.py.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
When building with NEWLIB_LIBC_NANO we need to copy
the globals from libc_nano.a into application memory
partition z_libc_partition, exactly as we do for
libc.a globals. This is required so that these globals
are accessible by nPRIV code, when building with
user mode support.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
In CMake projects, 'CMAKE_BUILD_TYPE' usually determines the
optimization flag, but in Zephyr it is determined through Kconfig.
To avoid confusing users we now give a warning if there is a mismatch
between the CMAKE_BUILD_TYPE and the optimization flag.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Commit 28a5657f1f and f67dcdbdf8 stopped ZEPHYR_BASE and
CMAKE_SOURCE_DIR from leaking into __FILE__ and other macros.
WEST_TOPDIR was still missing. Add it now that the new 'west topdir'
command has been implemented in
https://github.com/zephyrproject-rtos/west/pull/311
If the west version is too old then do nothing; same as before.
Any ASSERT in a zephyr module outside ZEPHYR_BASE is enough to test
this. One example:
$ZEPHYR_BASE/sanitycheck -T $ZEPHYR_BASE/tests/posix/fs/ -p qemu_x86 -v
readelf --string-dump=.rodata.disk_status.str1.1 {} \
$(find sanity-out -name zfs_diskio.c.obj | head -n 1)
String dump of section '.rodata.disk_status.str1.1':
[ 0] WEST_TOPDIR/modules/fs/fatfs/zfs_diskio.c
[ 2a] pdrv < ((long) (((int) sizeof(char[1 - 2 * !(!__built....
[ de] ASSERTION FAIL [%s] @ %s:%d^J
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
None of the splitting logic is needed if 64-bit return
values or parameters fit inside a register.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This commit allows a more dynamic approach for specifying that a zephyr
library must be placed in a dedicated app memomory partition.
This is still done by defining the partition in code using
K_APPMEM_PARTITION_DEFINE, but now the zephyr library can be added to
the generation of partition table using zephyr_library_app_memory
instead of modifying the overall zephyr/CMakeLists.txt file.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit introduces the cmake extension zephyr_library_amend.
This function allows for adding files in an out-of-tree Zephyr module
to a zephyr library created in zephyr repo CMake files.
As example:
drivers/entropy/CMakeLists.txt creates an zephyr library as:
zephyr_library()
only available to zephyr itself.
The amend function allows to amend to such a lib, by creating a
CMakeLists.txt file following identical folder structure in a Zephyr
Module:
<zephyr_module_oot>/drivers/entropy/CMakeLists.txt
zephyr_library_amend()
zephyr_library_sources() # Sources are amended to the original library
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The CMake documentation for 'project' states "Call the project()
command near the top of the top-level CMakeLists.txt". Meaning, it
should be run as early as possible.
An obscure internal error was observed when 'project' was located in
zephyr/CMakeLists.txt and was observed to be fixed after moving
'project' earlier, hence this patch that moves it earlier.
Invoking project depends on knowing information about the toolchain so
it is placed after target_toolchain.cmake.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
All compiler flag checks are cached for build-time performance reasons
except for the test that tests the toolchain itself.
It is believed that this test was left uncached because at the time,
there was not enough trust in the caching mechanism. But time has
shown that the caching mechanism is safe. So cache this test as well.
This improves build-time performance and also reduces noise in the
logs.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The log from CMake invocation's are now dominated by west
modules. This noise can hide important warnings.
To fix this we drop the logging.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The openocd flash runner now expects a hex file, so always build a HEX
image if the runner is set to openocd.
Fixes#18181
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The command for generating offsets.h has only been depending on the
target for offsets.c.obj, and not the file offsets.c.obj itself. Both
are needed, as explained in "CMake: dependencies between targets and
files and custom commands"[0].
This patch adds the dependency and fixes#18301
[0] https://tinyurl.com/y2hgzjhx
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
To let any other zephyr_system_include_directories() directives
act first and get these paths in an order allowing Zephyr's stuff
override compiler headers.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This abstracts the interface for generation of the strip command
line, by naming the desired actions instead of directly setting the
command parameters, which then opens up for other binary tool sets
which may require different arguments to achieve the desired result.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
This abstracts the interface for generation of the readelf command
line, by naming the desired actions instead of directly setting the
command parameters, which then opens up for other binary tool sets
which may require different arguments to achieve the desired result.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
This abstracts the interface for generation of the objdump command
line, by naming the desired actions instead of directly setting the
command parameters, which then opens up for other binary tool sets
which may require different arguments to achieve the desired result.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
This abstracts the interface for generation of the objcopy command
line, by naming the desired actions instead of directly setting the
command parameters, which then opens up for other binary tool sets
which may require different arguments to achieve the desired result.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
The method for getting a memory usage report printed during build, is
based on a GNU linker (ld) option flag, and thus is not necessarily
supported by other toolchain binary tools.
The introduced cmake macro allows for a given toolchain to specify how
the memory usage report is to be generated, and whether the command for
generation, if any, is to be added to the post_build_commands and the
post_build_byproducts lists of the top level CMakeLists.txt
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
The macro, toolchain_cc_produce_debug_info, adds the compiler specific
flag for enabling the production of debugging information in the
toolchain native format.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
In order to make sure that the build works in folders that require a UTF
encoding, make sure that both CMake and the various Python scripts that
interact with each other on files use the same encoding, in this case
UTF-8.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This script is looking for a hyperspecific error (mismatched padding
when linking into two simultaneous output sections) that bit us once,
in an era where the linker scripts were less unified. We haven't seen
it crop up since, and multiple platforms have changed the way they do
this anyway.
It's needless complexity. Junk it.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The zephyr_stdint.h file enforces Zephyr specific policies on the
compilation environment. Let's give compilers a chance to provide
definitions of their own via TOOLCHAIN_C_FLAGS prior the inclusion
of zephyr_stdint.h.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Compilers (at least gcc and clang) already provide definitions to
create standard types and their range. For example, __INT16_TYPE__ is
normally defined as a short to be used with the int16_t typedef, and
__INT16_MAX__ is defined as 32767. So it makes sense to rely on them
rather than hardcoding our own, especially for the fast types where
the compiler itself knows what basic type is best.
Using compiler provided definitions makes even more sense when dealing
with 64-bit targets where some types such as intptr_t and size_t must
have a different size and range. Those definitions are then adjusted
by the compiler directly.
However there are two cases for which we should override those
definitions:
* The __INT32_TYPE__ definition on 32-bit targets vary between an int
and a long int depending on the architecture and configuration.
Notably, all compilers shipped with the Zephyr SDK, except for the
i586-zephyr-elfiamcu variant, define __INT32_TYPE__ to a long int.
Whereas, all Linux configurations for gcc, both 32-bit and 64-bit,
always define __INT32_TYPE__ as an int. Having variability here is
not welcome as pointers to a long int and to an int are not deemed
compatible by the compiler, and printing an int32_t defined with a
long using %d makes the compiler to complain, even if they're the
same size on 32-bit targets. Given that an int is always 32 bits
on all targets we might care about, and given that Zephyr hardcoded
int32_t to an int before, then we just redefine __INT32_TYPE__ and
derrivatives to an int to keep the peace in the code.
* The confusion also exists with __INTPTR_TYPE__. Looking again at the
Zephyr SDK, it is defined as an int, even even when __INT32_TYPE__ is
initially a long int. One notable exception is i586-zephyr-elf where
__INTPTR_TYPE__ is a long int even when using -m32. On 64-bit targets
this is always a long int. So let's redefine __INTPTR_TYPE__ to always
be a long int on Zephyr which simplifies the code, works for both
32-bit and 64-bit targets, and mimics what the Linux kernel does.
Only a few print format strings needed adjustment.
In those two cases, there is a safeguard to ensure the type we're
enforcing has the right size and fail the build otherwise.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Found a few annoying typos and figured I better run script and
fix anything it can find, here are the results...
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
TEST configurations don't need to be warned that they're using test
techniques with some side-effects.
On a typical sanitycheck invocation, this warning is one of the only two
that appears in most test runs. In other words this commit gets rid of
half of the entire grep -ri '[[:blank:]]warn' noise that obscures any
work-in-progress warnings or platform specific warnings in the
logs (typically: device tree warnings).
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
In commit 28a5657f1f we stopped ZEPHYR_BASE from leaking into
__FILE__ and other macros. This works great for apps inside ZEPHYR_BASE
but does nothing for apps outside ZEPHYR_BASE.
-fmacro-prefix-map=${CMAKE_SOURCE_DIR}=CMAKE_SOURCE_DIR does it.
To avoid collisions and for consistency change:
-fmacro-prefix-map=${ZEPHYR_BASE}=.
to:
-fmacro-prefix-map=${ZEPHYR_BASE}=ZEPHYR_BASE
Quickest test/demo:
- Copy samples/hello_word/ to ~/home_world/
- Add "%s", __FILE__ to printf in ~/home_world/src/main.c
cmake -B build -S ~/home_world/ -DBOARD=qemu_x86
make -C build run
Before:
~/home_world/src/main.c says Hello World! qemu_x86
After:
CMAKE_SOURCE_DIR/src/main.c says Hello World! qemu_x86
objdump -h $(find build -name *.c.obj) | grep noinit
9 .noinit."ZEPHYR_BASE/kernel/system_work_q.c".0 0000
17 .noinit."ZEPHYR_BASE/kernel/init.c".2 00000100 000
18 .noinit."ZEPHYR_BASE/kernel/init.c".1 00000400 000
19 .noinit."ZEPHYR_BASE/kernel/init.c".3 00000800 000
16 .noinit."ZEPHYR_BASE/kernel/mailbox.c".2 00000348
18 .noinit."ZEPHYR_BASE/kernel/mailbox.c".1 00000028
20 .noinit."ZEPHYR_BASE/kernel/pipes.c".2 00000280 00
22 .noinit."ZEPHYR_BASE/kernel/pipes.c".1 00000028 00
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
The different linker steps are all hardcoded to the output filename
"zephyr.map" and only the last one survives.
Un-harcode.
This removes some confusion when trying to follow who builds
what/when/how and it stops destroying intermediate linking information
useful when tracing/debugging new features or issues in the build.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
The macro obtains the toolchain specific flag and value for
setting of the requested c standard.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
Final step of linker abstraction:
* Abstract zephyr_lnk by including it in toolchain_ld_link_elf.
* Abstract relevant uses of target_link_libraries.
* Introduce toolchain_ld_force_undefined_symbols.
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
The macro is intended to abstract the -fno-common compiler option
which controls the placement of uninitialized global variables. The
macro leaves it up to the toolchain to define the option.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
The macro is intended to abstract the -imacros compiler option for
inclusion of the autoconf.h header file. The abstraction allows for a
given toolchain to decide how the inclusion of the header file is to
be done.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
The macro is intended to abstract the -ffreestanding compiler option
which tells the compiler that this is a bare metal env. The option is
compiler and thus toolchain specific, but this macro leaves it up to
the toolchain to decide the value of the option.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
cmake has a number of issues dealing with symbolic links:
https://gitlab.kitware.com/cmake/cmake/issues/16228
One of them can cause cmake to rewrite the -S input from the user and
CMAKE_SOURCE_DIR to unexpectedly include symbolic links:
https://cmake.org/pipermail/cmake/2019-May/thread.html#69496
Catch this corner case and warn about subtle issues like breaking
-fmacro-prefix-map=${ZEPHYR_BASE}=
Sample warning message:
CMake Warning at ../../CMakeLists.txt:30 (message):
ZEPHYR_BASE doesn't match CMAKE_CURRENT_SOURCE_DIR
ZEPHYR_BASE = ~/zephyrproject/zephyr
PWD = ~/westsymlink/zephyr/samples/hello_world
CMAKE_CURRENT_SOURCE_DIR = ~/westsymlink/zephyr
You may be using a mix of symbolic links and real paths which causes
subtle and hard to debug CMake issues.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
As we start adding more modules, all of them end up in
${CMAKE_BINARY_DIR}/ and this is getting too busy. We have a module
directory created for each module and the interesting build data is
getting lost in the crowd.
Move all module into ${CMAKE_BINARY_DIR}/modules to and keep them under
one directory.
Future enhancement: maintain the same structure of the modules as
checked out by west.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Introducing the macro toolchain_cc_warning_error_implicit_int which,
abstracts the implicit_int error flag thus leaving it to the toolchain
to decide whether this flag is needed or not.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
The macros are named toolchain_cc_warning_error_misra_sane and
toolchain_cc_cpp_warning_error_misra_sane
These macros provide toolchain specific flag(s) relating to the MISRA
SANE configuration option.
The macros will place the flag(s) in a variable provided by caller,
which can then add to zephyr compile options.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
- Make the 'C++ Standard' choice depend on CPLUSPLUS, so that it only
shows up when C++ support is enabled.
Also check that CPLUSPLUS is enabled before checking the standard in
the top-level CMakeLists.txt, to avoid triggering an assert.
- The 'C++ Options' menu now contains just CPLUSPLUS and its indented
children. Remove one menu level by removing the menu and turning
CPLUSPLUS into a 'menuconfig' symbol. Also change the prompt from
"Enable C++ support for the application" to just "C++ support for the
application", to make it consistent with e.g. "Logging".
- Factor out the common CPLUSPLUS dependency with an 'if CPLUSPLUS'.
- Order symbol properties more consistently with other Kconfig files,
with the prompt at the top, etc.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This is placeholder for extended warning flags, likely to change between
toolchains.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
This is placeholder for base warning flags, common to most toolchains.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
The introduced macros are placeholders for the cmake parameter warning
level.
The intent here is to abstract Zephyr's dependence on toolchains,
thus allowing for easier porting to other, perhaps commercial,
toolchains and/or usecases.
No functional change expected.
Signed-off-by: Danny Oerndrup <daor@demant.com>
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
* KERNEL_ELF was easily confused with KERNEL_ELF_NAME and KERNEL_NAME.
* kernel_elf as the name of the binary indicates it somehow only
contains the kernel, which is not correct.
Rename to zephyr_final as this is the reality: Zephyr elf has been
linked again (a number of times) due to generated kernel files.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Move PROPERTY_LINKER_SCRIPT_DEFINES to toolchain_ld_base.
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
While configure_linker_script() may be useful for other linkers, it
currently only aimed at GNU ld. To really be useful among different
linkers, we would need to abstract its usage of the C preprocessor.
We can do this later, if needed.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Rather than associating defines within the function, let the call sites
themselves pick the appropriate define. Add new argument for this.
This also permits us to remove regex matching.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Reduce the amount of {pre,post}fixing magic: I.e. let it be clearer at
call sites that "linker.cmd" is a file, rather than having to know that
"linker" will be postfixed with ".cmd" internally.
Change argument name to linker_script_gen, to better indicate that we
are producing a generated file.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Now that we avoid the two-step procedure, we can simplify the name of
the construct_add_custom_command_for_linker_pass macro.
Move description comment up to head of definition, making the purpose
clearer.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Change construct_add_custom_command_for_linker_pass from function into
macro. The purpose of the function was to set the output variable to a
string that would be fed to add_custom_command. This meant all use
required a two-step procedure and an intermediate
variable (custom_command).
The environmental leakage from a macro in this case is small, so let's
just simplify to a macro and avoid the two-step.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Full grep reveal ALIGN_SIZING_DEP is only mentioned in cmake, where
it is never assigned a value.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Move GNU ld linker specific flags related to orphan handling into
toolchain_ld_baremetal().
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Move --gc-sections flag to toolchain_ld_base()
Move --build-id=none flag to toolchain_ld_base()
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
The intent of toolchain_ld_baremetal() is to collect the flags belonging
to non-hosted (i.e. POSIX-based) targets.
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
* LINKERFLAGPREFIX's value is GNU ld specific, and
* LINKERFLAGPREFIX is not a convention always honored by all linkers.
Thus we shall not set it from the common root CMakeList.txt.
So we move to linker/ld/target.cmake.
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
When linking, clang doesn't pick -T for some reason and complains,
while -Wl,-T works for both, gcc and clang.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
toolchain_ld_base() represents flags that are fundamental to linking or
otherwise does not belong in any further specified linker flag category.
No functional change expected.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting non-intrusive porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
toolchain_cc_nostdinc does not only obtain flags (to be placed in a
variable), it obtains and applies them.
No functional change expected.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
- The script can but does not always generate five files, in fact the
current build invokes it at least three times requesting different
outputs every time.
- --kobj-types-output produces a code fragment; not a standalone/usable
header file. It outputs enum constants for a single enum type and not
several enum types.
- Some outputs include driver instances and others not: clarify which.
- There's an entire and great section in the documentation that took
me ages to find because it's not referenced anywhere in the --help
or code. Fixed.
- Highlight the massive duplication in the CMakeLists.txt to save
déjà vu confusion and minimize future divergence.
- Other minor tweaks.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
We have users that have problems in their linker scripts where the
order of input sections matters.
To allow users to use the latest Zephyr while working on a fix to
their linker scripts we add an option to allow leaving the sections
unsorted.
See discussion here for more details
https://github.com/zephyrproject-rtos/zephyr/pull/14183
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The comment for:
set_target_properties(${logical_target_for_zephyr_elf} PROPERTIES
OUTPUT_NAME ${KERNEL_NAME})
was completely off-topic and making something relatively simple
incredibly puzzling and time-consuming to understand.
Re-order the if(GKSF OR GKOF) clauses so the two initializations of
logical_target_for_zephyr_elf are close to each other and so the very
short clause is not buried at the bottom of the long one.
Other minor logical_target_for_zephyr_elf comment fixes.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
If the compiler supports it, strip the ${ZEPHYR_BASE} prefix from the
__FILE__ macro used in __ASSERT* macros, in the
.noinit."/home/joe/zephyr/fu/bar.c" section names and in any application
code. This saves some memory, stops leaking user locations in binaries,
makes failure logs more deterministic and most importantly makes builds
more deterministic.
- .noinit section names now look like this in objdump -h:
17 .noinit."./kernel/init.c".2 00001100 00000000 ...
18 .noinit."./kernel/init.c".1 00001200 00000000 ...
19 .noinit."./kernel/init.c".3 00001800 00000000 ...
- The output of __ASSERT* macros now looks like this:
ASSERTION FAIL [0] @ ./samples/hello_world/src/main.c:13
The world comes crashing down
***** Kernel Panic! *****
Current thread ID = 0x00400040
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Previous commit c31e659165 changed
the ALWAYS_INLINE macros to avoid functions being inlined for
the purpose of code coverage. This has a side effect of causing
the text sections of kobject_hash.c and priv_stacks_hash.c
to ballon more than 10 times in size. This is caused by
attaching the unused attribute, which results in all those
functions being in the text sections though they are never
used. So just keep the "inline" there.
This also removes -fno-inline from NO_COVERAGE_FLAGS so these
two files are not compiled with flags related to code coverage.
Fixes#15009
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Due to the fact that CMake only supports greedy regexes,
the ':' in a Windows path ('C:\...') was being matched leading
to an invalid split of the line. Quote both the name and the path
to avoid this issue.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fixes: #14513
This commit move the functionality of extracting zephyr modules into
generated CMake and Kconfig include files from CMake into python.
This allows other tools, especially CI to re-use the zephyr module
functionality.
Signed-off-by: Torsten Rasmussen <torsten.rasmussen@nordicsemi.no>
To ensure the proper flags are specified to the toolchain, we need to
keep system headers and non-system headers seperate and set the SYSTEM
flag to target_include_directories for system headers.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The gperf hashtables and support functions are created
after the initial zephyr_prebuilt.elf is created, using
data found within it.
A fixed-sized amount of memory is reserved for the
program text of these support functions, as their true
size isn't possible to predict in advance and we don't
want memory addresses after them to shift. To minimize
the amount of space reserved, it seemed reasonable to
hard-code -Os.
However, on ARC, building with -Os can cause various
millicode functions from libgcc to be included in the
binary which would not be present in zephyr_prebuilt.elf
unless zephyr_prebuilt.elf was also built with -Os,
causing anything after them to be shifted, wreaking all
kinds of havoc.
Just build without hardcoding any optimization parameters.
We have checks in the linker scripts to let us know if
we have overflowed the region for the gperf support
functions anyway, so there is no danger of this failing
silently.
Fixes: #14139
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This turns on the linker flag to sort sections by alignment
in decreasing size of symbols. This helps to minimize
padding between symbols.
This also adds the linker options to sort common symbols by
alignment in descending to minimize the need for padding.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
If CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT is enabled,
the app shared memory partition may cause waste of memory
due to the need for padding.
For example, tests/subsys/jwt and board mps2_an385:
z_test_mem_partition: addr 0x20000000, size 52
z_libc_partition : addr 0x20000040, size 4
k_mbedtls_partition : addr 0x20008000, size 32736
ending at 0x2000ffff, taking up 65536 bytes
With power-of-two size and alignment requirement,
k_mbedtls_partition takes up 32KB memory and needs to be
aligned on 32KB boundary. If the above partitions are
ordered as shown, there needs to be a lot of padding
after z_libc_partition before k_mbedtls_partition can
start. In order to minimize padding, these partitions
need to be sort by size in descending order.
After the changes here, the partitions are:
k_mbedtls_partition : addr 0x20000000, size 32736
z_test_mem_partition: addr 0x20008000, size 52
z_libc_partition : addr 0x20008040, size 4
ending at 0x2000805f, taking up 32864 bytes
With the above example, sorting results in a saving
of 32672 bytes of saving.
Fixes#14121
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The app_smem.ld is also being used by architectures other than ARM.
So move the linker script out of include/arch/arm and into
include/linker.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When we build with newlib we don't set -nostdinc. In that case make
sure that we leave it to the toolchain to set the system include paths.
The one exception to leaving to the toolchain to set the system include
paths is the path to the newlib headers. Since we build
with -ffreestanding we need to make sure the newlib header path is the
before the toolchain headers. Otherwise the toolchain's 'freestanding'
headers get picked up and that causes issues (for example getting PRI*64
defined properly from inttypes.h due to __STDC_HOSTED__ being '0').
For newlib we accomplish this by having the only system header specified
by zephyr_system_include_directories() being just the newlib headers.
Note: for minlibc we leave things alone as things just happen to work as
the -I include of the libc headers takes precedence over -isystem so we
get the libc headers over the toolchain ones. For the newlib case it
appears that setting both -I and -isystem for the same dir causes the
-I to be ignored.
Fixes#14310
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The mbedtls library has some globals which results in faults
when user mode tries to access them.
Instantiate a memory partition for mbedtls's globals.
The linker will place all globals found by building this
library into this partition.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The empty-library check was introduced because in earlier versions of
CMake the error message for empty libraries was very cryptic. But in
3.13.2 CMake now reports:
-- Configuring done
CMake Error at ../../cmake/extensions.cmake:357 (add_library):
No SOURCES given to target: drivers__entropy
Call Stack (most recent call first):
../../cmake/extensions.cmake:334 (zephyr_library_named)
../../drivers/entropy/CMakeLists.txt:1 (zephyr_library)
which should be clear enough.
In addition to being redundant, our empty library check is run earlier
than CMake's check, so it will falsely report libraries to be empty,
when in fact, in an out-of-tree driver use-case, they will not
actually be empty at Generation time.
CMake runs it's check at generation time and is not affected by this
problem, so we remove the check.
This is a step, but not a complete solution, to resolving #8379.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Rename the poorly named CMake variable 'CONFIG_COMPILER_OPT_AS_LIST'
to 'COMPILER_OPT_AS_LIST' to take it out of the Kconfig-reserved
namespace 'CONFIG_*'.
This is a small step towards resolving #12144
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Fixes: #13245
Remove the printing of: 'Including module(s)' when no modules are
included into the CMake build.
Signed-off-by: Torsten Rasmussen <torsten.rasmussen@nordicsemi.no>
MISRA rules (see #9892) forbid alloca() and family, even though those
features can be valuable performance and memory size optimizations
useful to Zephyr.
Introduce a MISRA_SANE kconfig, which when true enables a gcc error
condition whenever a variable length array is used.
When enabled, the mempool code will use a theoretical-maximum array
size on the stack instead of one tailored to the current pool
configuration.
The rbtree code will do similarly, but because the theoretical maximum
is quite a bit larger (236 bytes on 32 bit platforms) the array is
placed into struct rbtree instead so it can live in static data (and
also so I don't have to go and retune all the test stack sizes!).
Current code only uses at most two of these (one in the scheduler when
SCHED_SCALABLE is selected, and one for dynamic kernel objects when
USERSPACE and DYNAMIC_OBJECTS are set).
This tunable is false by default, but is selected in a single test (a
subcase of tests/kernel/common) for coverage. Note that the I2C and
SPI subsystems contain uncorrected VLAs, so a few platforms need to be
blacklisted with a filter.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
- newlib needs c standard includes (so no -nostdinc)
- xcc needs toolchain headers (so no -nostdinc)
- with host gcc:
- x86_64 should not build with standard includes (-nostdinc needed)
- native_posix should build with standard include (no -nostdinc)
..
..
To simplify, abstract this and move it to compilers/toolchains and still
depend on what the application wants.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is an integral part of userspace and cannot be used
on its own. Fold into the main userspace configuration.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Introduce toolchain_cc_asm macro to capture toolchain specific flags
related to assembly.
-D_ASMLANGUAGE is kept common for all, assuming -D as define flag is
supported by all compilers (which is almost the case).
No functional change expected.
Clang's flags are compatible with gcc, and are thus inherited.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting easier porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
We need a generic name for the partition containing
essential C library globals. We're going to need to
add the stack canary guard to this area so user mode
can read it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Move test related code and the testsuite away from tests/ and make it a
proper subsystem.
The way tests were integrate in the tree was not obvious and actual
tests were intermixed with the testsuite code.
This will allow us to have trees with the testcode and without the
samples by just remove the folders tests/ and samples, needed for
isolating actual code from test/sample code.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We where defining the variable NOSTDINC_F after we tried to use it.
Move the definition before the first reference fixes things. When
-nostdinc now enabled we need to explicitly add the compiler include
path for x86_64 based builds (x86_64 and ARCH_POSIX).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Introduce toolchain_cc_cpp_*-family of macros.
Move the following into the toolchain_cc_cpp_* macros:
* Common base set of flags
* C++ standard version
* RTTI
* Exceptions
These macros must be implemented by every compiler port.
These macros set the respective flags, but leaves logic and control to
the root CMakeLists.txt file.
No functional change expected.
Clang's C++ flags are compatible with gcc, and are thus
inherited.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting easier porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
The compiler flags -ffunction-sections and -fdata-sections are already
universally set from arch/common/CMakeLists.txt, so we shall not set
them again for C++ only.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Introduce toolchain_cc_optimize_for_* family of macros.
Each macro represents a general optimization class.
Each macro is then responsible for setting an output variable to that
class-of-optimization's flag.
The names of these output variables are decided from the root
CMakeLists.txt.
No functional change expected.
Clang's optimization flags are compatible with gcc, and are thus
inherited.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting easier porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
This commit allows for Zephyr modules to be natively integrated into
the build system with CMakeLists.txt and Kconfig files.
The sourcing of module files are done in following order:
- If <module>/zephyr/module.yml exists, use cmake and kconfig settings
for sourcing of additional file
- Else if <module>/zephyr/CMakeLists.txt exists, source this file into
CMake build tree and add <module>/zephyr/Kconfig as osource
If none of the above files are present, the project is considered to
not be a Zephyr module
Signed-off-by: Torsten Rasmussen <torsten.rasmussen@nordicsemi.no>
The dependencies relating to generating LD scripts are declared
incorrectly. This manifests itself as broken incremental builds as
shown in #13001.
This commit aligns the LD script generation with the Zephyr standard
for declaring custom commands.
For instance, custom commands should generate files that are wrapped
by targets. The custom commands should declare the dependencies, not
the targets.
Also, when using custom commands, the OUTPUT signature should be used,
not the TARGET signature, as app_smem was doing.
For details about how Zephyr uses custom commands see
https://samthursfield.wordpress.com/2015/11/21/cmake-dependencies-between-targets-and-files-and-custom-commands/
This fixes#13001.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
To be able to correctly express that preprocessing a file will depend
on targets and files we enhance the LD script preprocessing function
by adding all trailing arguments to the DEPENDS section of the custom
command.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This commit applies various refactorings and whitespace fixes in
preparation for the patch that fixes#13001.
It includes changing indentation from tabs to spaces and splitting
tokens across more lines to increase readability and minimize patch
sizes.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This was never a long-term solution, more of a gross hack
to get test cases working until we could figure out a good
end-to-end solution for memory domains that generated
appropriate linker sections. Now that we have this with
the app shared memory feature, and have converted all tests
to remove it, delete this feature.
To date all userspace APIs have been tagged as 'experimental'
which sidesteps deprecation policies.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
* Newlib now defines a special z_newlib_partition containing
all globals relevant to newlib. Most of these are in libc.a
with a heap tracking variable in newlib's hooks.
* Both C libraries now expose a k_mem_partition containing the
bounds of the malloc heap arena. Threads that want to use
libc malloc() will need to add this to their memory domain.
* z_newlib_get_heap_bounds has been removed, in favor of the
memory partition for the heap arena
* ztest now includes the C library partitions in its memory
domain.
* The mem_alloc test now runs in user mode to prove that this
all works for both C libraries.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This particular rule of cmake was causing problems when run in
multi-threaded environment. This change in the dependency will
resolve all such issues and ensures that this script is executed
correctly.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch will run the python scripts for all architectures
to determine the partitions available. This is needed for correct
operation of the app_shared_mem feature.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Introduces the ARCH_ROOT argument, similar to BOARD_ROOT and SOC_ROOT.
This enables support for out-of-tree architectures.
The ARCH_ROOT out-of-tree layout is expected to be the following:
* ${ARCH_ROOT}/arch/${ARCH}/
* ${ARCH_ROOT}/include/arch/${ARCH}/ (Optional)
Signed-off-by: Klaus Petersen <kape@oticon.com>
With the new cmake version, we are able to simplify the generation of
the offset object library without using absolute hardcoded paths.
Instead of the hardcoded paths, we now use the generator:
$<TARGET_OBJECTS:${OFFSETS_LIB}>
This is needed to eventually be able to have an arch-out-of-tree build
Signed-off-by: Klaus Petersen <kape@oticon.com>
This patchset introduces support for building board specific custom
images. Any board which needs to build a custom image (a post-processed
zephyr.bin) should inject the post_build_command from a script in the
corresponding board directory.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Don't add non-existing include directories, it creates noise and even
warnings in some tooling, like Eclipse.
This fixes#12696
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Introduce the first of the toolchain_cc-family of macros:
toolchain_cc_security_fortify and toolchain_cc_security_canaries.
No functional change expected.
Fortify source is not supported by Clang, but this commit retains
current behavior.
This is motivated by the wish to abstract Zephyr's usage of toolchains,
permitting easier porting to other (commercial) toolchains.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
The "register" keyword was deprecated since C++11.
Add -Wno-register flag for avoid warning, with recent version of C++.
Signed-off-by: Benoit Leforestier <benoit.leforestier@gmail.com>
The gperf hash table 'kobject_hash.c' is always compiled as -Os to
resolve bug #5226, the same bug also affects the gperf hash table
'priv_stacks_hash.c'.
In this patch we copy over the fix from 'kobject_hash.c' to also fix
'priv_stacks_hash.c'.
See #5672 for more discussion on the original fix.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
A recent change in how the fixup mechanism works caused several
regressions. See
https://github.com/zephyrproject-rtos/zephyr/pull/12680 for more
details about the regressions.
The core of the matter is that using defines to pass on include paths
causes interopability issues when integrating with external build
systems.
To resolve this we re-write the fixup mechanism to instead generate an
aggregated fixup file that is ready to be included at build time. Then
no paths are passed through defines and we resolve the regressions
reported.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
extract_dts_includes.py has been generating DT output and then
concatenating it with fixup header files to create
'generated_dts_board.h'.
In this patch we instead introduce a source file named
'generated_dts_board.h' and have it \#include the appropriate DT
output and fixup files.
This results in a simpler system because users can now read
'generated_dts_board.h' as C source code to see how fixup files and
generated DT output relate to each other. Whereas before they would
have to either read documentation or python code to gain the same
understanding.
Also, it reduces the scope and complexity of one of our most bloated
python scripts, extract_dts_includes.py.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This re-write fixes several issues with how we were checking for
compatibility with the canary flags:
If a compiler did not support any stack canaries, but a user had still
enabled them, this would silently result in no canaries being added
instead of error-ing out as it should have.
Compatiblity for '-mstack-protector-guard=global' was unnecessarily
being tested twice, once in 'check_c_compiler_flag' and once in
'zephyr_cc_option'.
Compatibility was being tested with 'check_c_compiler_flag' which is
slower than 'zephyr_check_compiler_flag' because it does not cache
it's results.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
There is an effort underway to make most of the Zephyr build script's
reentrant. Meaning, the build scripts can be executed multiple times
during the same CMake invocation.
Reentrancy enables several use-cases, the motivating one is the
ability to build several Zephyr executables, or images, for instance a
bootloader and an application.
For build scripts to be reentrant they cannot be directly referencing
global variables, like target names, but must instead reference
variables, which can vary from entry to entry.
Therefore, in this patch, we replace global targets with variables.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
There is an effort underway to make most of the Zephyr build script's
reentrant. Meaning, the build scripts can be executed multiple times
during the same CMake invocation.
Reentrancy enables several use-cases, the motivating one is the
ability to build several Zephyr executables, or images, for instance a
bootloader and an application.
For build scripts to be reentrant they cannot be directly referencing
global variables, like target names, but must instead reference
variables, which can vary from entry to entry.
Therefore, in this patch, we replace global targets with variables.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
When coverage option is enabled, all C files will have
coverage option enabled. When we enable it for generated files
it adds extra .bss info and other related information.
Since the bss has now increased the perfect hash that was
calculated by gperf is now incorrect. Which is a problem
for userspace enabled systems.
This patch will make sure that the generated C files will be
compiled without the coverage flags. The remaining functionality
remains unchanged.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Cosmetics, no functional change expected.
Fixed leading space alignment.
Replaced tabs with spaces.
Emulation error message output is now aligned.
To locate tabs in cmake, the following bash is useful:
grep -PRil "\t" * | grep -i cmake | grep -v ^sanity
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Newer versions of GCC default to using thread-local storage ABI
for the canary value instead of a global. We don't implement TLS
in Zephyr like this (at least for now) so specify that we want
to use the global instead.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is needed to force the .common type to .bss type.
This will force the .common variables to go into bss section
in the compiled object file.
As of now the movement to the .bss section was happening only
during the final linking stage.
The -fno-common option specifies that the compiler should place
uninitialized global variables in the data section of the object
file, rather than generating them as common blocks. This has the
effect that if the same variable is declared (without "extern")
in two different compilations, you will get a multiple-definition
error when you link them.
e.g:
// file a.c
// file-scope
int b;
// file b.c
// file-scope
int b;
If there exist two non-extern declarations of the same variable
then no-common will cause a linker error.
This sequence would have compiled before, but will now cause a
linker error.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch creates a rule in the cmake to trigger the generation
of linker_relocate.ld and code_relocation.c files.
The linker_relocate.ld will create appropriate sections and will
link the required functions or variables from all the selected
files.
The code_relocation.c will have code that is needed for
initializing data sections and copy of text sections(if XIP).
Also this will contain code that is needed for zeroing of bss.
The procedure to invoke this feature is:
1. Enable CONFIG_CODE_RELOCATION in the prj.conf
2. Inside CMakeList.txt in the project we need to mention
all the files that needs to get relocated.
zephyr_kernel_code_relocate(src/*.c SRAM2)
Where the first argument is the file/files and the second
argument is the memory where it has be placed.
NOTE: The file argument supports glob expressions.
NOTE: Step 2 can be done as many times as required. And relative
paths can be given here.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch adds a dependency from the 'flash' target to
the 'mergehex' target IF files to be merged are configured.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
This patch fixes a bug where a incorrect lower case
variable 'MERGED_HEX_NAME' resulted in the 'flash'
target not getting the correct path to the hex file to flash.
This since cmake/flash/CMakeLists.txt uses the variable
${MERGED_HEX_NAME}.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Some toolchains are built with multilib enabled in order to provide
multiple versions of the same library, optimized for different ABI
or architecture. They require the the ABI/architecture/CPU selection
options to be passed at linked time. This is important for example
when linking with newlib.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Allow user to add externally built hex files to the cmake property
HEX_FILES_TO_MERGE. The hex files in this list will be merged
with the hex file generated when building the zephyr application.
This allows users to leverage the application configuration
available in Kconfig and CMake to help decide what hex file
should be merged with the zephyr application.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
This is done to make future modifications simpler,
as more variables and functions are available.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
This is done to make future modifications simpler,
as more variables and functions are available.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
This is done to make future modifications simpler,
as more variables and functions are available.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
This is done to make future modifications simpler,
as more variables and functions are available.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Since the app_data_alignment.ld is not used anymore in ARM
builds, remove the need for running the script to auto-
generate it. The script now runs only for ARC builds.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit moves the app_data_alignment.ld scripts
under arch/arc sub-directory, as it is not not used
at all in ARM builds. The script is still used for
ARC, whose v2 MPU also has the reuquirement for
power-of-two size alignment.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Defines a Kconfig variable which allows the user to specify
that any generated hex/bin/s19 file should not have filled gaps.
This is done to support building in a multi image context,
where several image files will be merged together.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Remove having ${BOARD_DIR} in the global include path for Zephyr builds.
Needed to add this to the arch/posix because of how posix "boards"
define various things like interrupt handling.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This reverts commit 18f9bb04f7.
This breaks with cmake 3.8.2, the minimal required version we have in
all of our cmake files.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use cmake to get generated path of lib instead of predefined absolute
path. This is needed to eventually be able to have an
architecture-out-of-tree build. The path "OFFSETS_O_PATH" is not
generated for sources out-of-tree and therefore must be replaced by the
cmake generator $<TARGET_OBJECTS:offsets>.
The following lines are needed while we are using a Cmake version <
3.12.3:
target_include_directories(.....
target_compile_options(...
target_compile_definitions(....
This is due to the cmake feature "Linking Object Libraries" not
supported until 3.12:
https://cmake.org/cmake/help/v3.12/command/target_link_libraries.html#linking-object-libraries
Signed-off-by: Klaus Petersen <kape@oticon.com>
Not all compiles/linkers support the GCC flags to not include standard
defines, include files and libraries. So make these parameters such
that the toolchain can define them when supported.
Also, according to documentation, -nostdlib does the same for both
-nostartfiles and -nodefaultlibs. So remove the redundant ones.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Can choose the C++ standard (C++98/11/14/17/2a)
Can link with standard C++ library (libstdc++)
Add support of C++ exceptions
Add support of C++ RTTI
Add C++ options to subsys/cpp/Kconfig
Implements new and delete using k_malloc and k_free
if CONFIG_HEAP_MEM_POOL_SIZE is defined
Signed-off-by: Benoit Leforestier <benoit.leforestier@gmail.com>
(Previous patch set was reverted due to issue with priv_stack.
Resubmitting after fixing the faults caused by priv_stack.noinit
not at the end of RAM.)
This adds a linker flag and necessary changes to linker scripts
so that linker will warn about orphan sections.
Relates to #5534.
Fixes#10473, #10474, #10515.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
We break dependency if we rename the zephyr.elf file, we should keep it
as it is an essential dependency in the build system. Instead, copy the
file.
Fixes#10639
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For the 'app' build scripts to be able to do post-processing on the
elf file they need to know what the target name for the elf file is.
In zephyr this name varies depending on whether one does a single or
multiple link, so we export a variable with the name.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Update rel-sections.ld to use wildcards instead of
spelling out those sections one by one.
Also, for POSIX, don't include this and turns off
the warnings. With different host toolchain across
different OS, it would be maintanence nightmare
to account for all those combinations. So this reverts
the POSIX linker script to before the first orphan
section changes.
Fixes#10493
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This patch adds Big Endian architecture support. Even if a compiler
generating big endian object files is used, our linker script, or
include/linker/linker-tool-gcc.h to be precise, has default output
format as little endian.
This patch adds a hidden config CONFIG_BIG_ENDIAN, which should be set
by big endian architectures or a SoC's, and adds an condition to
switch OUTPUT_FORMAT in our linker.cmd.
Signed-off-by: Yasushi SHOJI <y-shoji@ispace-inc.com>
This adds a linker flag and necessary changes to linker scripts
so that linker will warn about orphan sections.
Relates to #5534.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Due to the new changes for the subsys/app_memory we need to
have the script for smem run before any elf is created.
This is needed because the compiled code will have references to
certain linker variables that will be created by
gen_app_partitions.py.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
The scripts for app_smem need to be ready before the script for
privilaged stack is run. This is needed because there is a small
possibility that the stacks get aligned (due to app_smem)
after privilaged stack script is run. This causes the gperf
to create an incorrect hash.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
When checking availability of soc/${ARCH}/CMakeLists.txt,
we should use ${ZEPHYR_BASE} as path base.
Fixes#9956
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This rewrites the implementation of the APP_INPUT_SECTION and
KERNEL_INPUT_SECTION macros such that an unbounded amount of
kernelspace libraries can be used.
This resolves#7703
The new implementation has a caveat/limitation; the linker script
developer must invoke APP_INPUT_SECTION before KERNEL_INPUT_SECTION.
All in-tree linker scripts happened to already be doing this so no
in-tree porting was necessary.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This feature was failing on a default ARM core MPU. The linker
script that was getting created was not able to align the required
partitions at prebuilt time.
The old implementation relied on the prebuilt to finish then
extract the size information which was then used to align the regions.
This fails because the size of the alignment and the fill in the
linker needs to be available at prebuilt time else it cant manage
the final elf file generation. We cant have 2 different sizes of
prebuilt and final elf file.
This implementation will get the alignment requirements met at
prebuilt time.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Remove the usage of --start-group and --end-group. Perhaps it had a
function previously, but as it is used here it has no effect.
--start-group and --end-group is used to designate that a set of libs
should be searched repeatedly until all unresolved references among
them are resolved. From the documentation:
--start-group archives --end-group
The specified archives are searched repeatedly until no
new undefined references are created. Normally, an
archive is searched only once in the order that it is
specified on the command line. If a symbol in that
archive is needed to resolve an undefined symbol
referred to by an object in an archive that appears
later on the command line, the linker would not be able
to resolve that reference. By grouping the archives,
they all be searched repeatedly until all possible
references are resolved.
Using this option has a significant performance cost.
It is best to use it only when there are unavoidable
circular references between two or more archives.
Currently it is used on the 'ZEPHYR_LIBS_PROPERTY' libs, but this has
no effect, because they are being --whole-archive'd anyway. It is also
used on 'kernel' and 'OFFSETS_O_PATH'. But these libraries have no
circular references, so this has no effect either.
Consequently, removing these two flags is expected to simplify the
link command line and have no adverse effects.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
There's no particularly good reason to have one kind of
output from this script to be sent to stdout instead of
a filename specified by parameter, and it makes it
annoying to add debug print() statements.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Summary: revised attempt at addressing issue 6290. The
following provides an alternative to using
CONFIG_APPLICATION_MEMORY by compartmentalizing data into
Memory Domains. Dependent on MPU limitations, supports
compartmentalized Memory Domains for 1...N logical
applications. This is considered an initial attempt at
designing flexible compartmentalized Memory Domains for
multiple logical applications and, with the provided python
script and edited CMakeLists.txt, provides support for power
of 2 aligned MPU architectures.
Overview: The current patch uses qualifiers to group data into
subsections. The qualifier usage allows for dynamic subsection
creation and affords the developer a large amount of flexibility
in the grouping, naming, and size of the resulting partitions and
domains that are built on these subsections. By additional macro
calls, functions are created that help calculate the size,
address, and permissions for the subsections and enable the
developer to control application data in specified partitions and
memory domains.
Background: Initial attempts focused on creating a single
section in the linker script that then contained internally
grouped variables/data to allow MPU/MMU alignment and protection.
This did not provide additional functionality beyond
CONFIG_APPLICATION_MEMORY as we were unable to reliably group
data or determine their grouping via exported linker symbols.
Thus, the resulting decision was made to dynamically create
subsections using the current qualifier method. An attempt to
group the data by object file was tested, but found that this
broke applications such as ztest where two object files are
created: ztest and main. This also creates an issue of grouping
the two object files together in the same memory domain while
also allowing for compartmenting other data among threads.
Because it is not possible to know a) the name of the partition
and thus the symbol in the linker, b) the size of all the data
in the subsection, nor c) the overall number of partitions
created by the developer, it was not feasible to align the
subsections at compile time without using dynamically generated
linker script for MPU architectures requiring power of 2
alignment.
In order to provide support for MPU architectures that require a
power of 2 alignment, a python script is run at build prior to
when linker_priv_stacks.cmd is generated. This script scans the
built object files for all possible partitions and the names given
to them. It then generates a linker file (app_smem.ld) that is
included in the main linker.ld file. This app_smem.ld allows the
compiler and linker to then create each subsection and align to
the next power of 2.
Usage:
- Requires: app_memory/app_memdomain.h .
- _app_dmem(id) marks a variable to be placed into a data
section for memory partition id.
- _app_bmem(id) marks a variable to be placed into a bss
section for memory partition id.
- These are seen in the linker.map as "data_smem_id" and
"data_smem_idb".
- To create a k_mem_partition, call the macro
app_mem_partition(part0) where "part0" is the name then used to
refer to that partition. This macro only creates a function and
necessary data structures for the later "initialization".
- To create a memory domain for the partition, the macro
app_mem_domain(dom0) is called where "dom0" is the name then
used for the memory domain.
- To initialize the partition (effectively adding the partition
to a linked list), init_part_part0() is called. This is followed
by init_app_memory(), which walks all partitions in the linked
list and calculates the sizes for each partition.
- Once the partition is initialized, the domain can be
initialized with init_domain_dom0(part0) which initializes the
domain with partition part0.
- After the domain has been initialized, the current thread
can be added using add_thread_dom0(k_current_get()).
- The code used in ztests ans kernel/init has been added under
a conditional #ifdef to isolate the code from other tests.
The userspace test CMakeLists.txt file has commands to insert
the CONFIG_APP_SHARED_MEM definition into the required build
targets.
Example:
/* create partition at top of file outside functions */
app_mem_partition(part0);
/* create domain */
app_mem_domain(dom0);
_app_dmem(dom0) int var1;
_app_bmem(dom0) static volatile int var2;
int main()
{
init_part_part0();
init_app_memory();
init_domain_dom0(part0);
add_thread_dom0(k_current_get());
...
}
- If multiple partitions are being created, a variadic
preprocessor macro can be used as provided in
app_macro_support.h:
FOR_EACH(app_mem_partition, part0, part1, part2);
or, for multiple domains, similarly:
FOR_EACH(app_mem_domain, dom0, dom1);
Similarly, the init_part_* can also be used in the macro:
FOR_EACH(init_part, part0, part1, part2);
Testing:
- This has been successfully tested on qemu_x86 and the
ARM frdm_k64f board. It compiles and builds power of 2
aligned subsections for the linker script on the 96b_carbon
boards. These power of 2 alignments have been checked by
hand and are viewable in the zephyr.map file that is
produced during build. However, due to a shortage of
available MPU regions on the 96b_carbon board, we are unable
to test this.
- When run on the 96b_carbon board, the test suite will
enter execution, but each individaul test will fail due to
an MPU FAULT. This is expected as the required number of
MPU regions exceeds the number allowed due to the static
allocation. As the MPU driver does not detect this issue,
the fault occurs because the data being accessed has been
placed outside the active MPU region.
- This now compiles successfully for the ARC boards
em_starterkit_em7d and em_starterkit_em7d_v22. However,
as we lack ARC hardware to run this build on, we are unable
to test this build.
Current known issues:
1) While the script and edited CMakeLists.txt creates the
ability to align to the next power of 2, this does not
address the shortage of available MPU regions on certain
devices (e.g. 96b_carbon). In testing the APB and PPB
regions were commented out.
2) checkpatch.pl lists several issues regarding the
following:
a) Complex macros. The FOR_EACH macros as defined in
app_macro_support.h are listed as complex macros needing
parentheses. Adding parentheses breaks their
functionality, and we have otherwise been unable to
resolve the reported error.
b) __aligned() preferred. The _app_dmem_pad() and
_app_bmem_pad() macros give warnings that __aligned()
is preferred. Prior iterations had this implementation,
which resulted in errors due to "complex macros".
c) Trailing semicolon. The macro init_part(name) has
a trailing semicolon as the semicolon is needed for the
inlined macro call that is generated when this macro
expands.
Update: updated to alternative CONFIG_APPLCATION_MEMORY.
Added config option CONFIG_APP_SHARED_MEM to enable a new section
app_smem to contain the shared memory component. This commit
seperates the Kconfig definition from the definition used for the
conditional code. The change is in response to changes in the
way the build system treats definitions. The python script used
to generate a linker script for app_smem was also midified to
simplify the alignment directives. A default linker script
app_smem.ld was added to remove the conditional includes dependency
on CONFIG_APP_SHARED_MEM. By addining the default linker script
the prebuild stages link properly prior to the python script running
Signed-off-by: Joshua Domagalski <jedomag@tycho.nsa.gov>
Signed-off-by: Shawn Mosley <smmosle@tycho.nsa.gov>
When compiling for native, some glibc versions has a check on the
use of _FORTIFY_SOURCE without optimizations enabled and gives a
preprocessor warning.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Add "gap-fill 0xFF" option for the CMAKE_OBJCOPY command,
in order to reduce the flash programming time for some boards,
such as cc2650.
Signed-off-by: Walter Xie <41377148@qq.com>
Previously the syscall list was generated only from the include
folder. This is a limitation when the application tries to create
system calls. This patch create a simple way to include these
new syscalls without the application touching the kernel.
This can be enabled by a Kconfig CONFIG_APPLICATION_DEFINED_SYSCALL.
Once enabled the application source directory will be scanned to
find all application defined syscalls.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
The entry point can and therefore should be set by linker
scripts. Whenever possible one should express things in the source
language, be it .c or .ld, and not in code generators or in the build
system.
This patch removes the flag -eCONFIG_KERNEL_ENTRY from the linker's
command line and replaces it with the linker script command
ENTRY(CONFIG_KERNEL_ENTRY)
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add an LLVM backend and a clang toolchain variant to support building
with llvm coming with popular Linux distributions.
This has been tested with X86 boards:
- quark_d2000_crb
- quark_se_c1000_devboard/Arduino 101
Use:
export ZEPHYR_TOOLCHAIN_VARIANT=clang
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Python scripts should be executed indirectly by the python
interpreter, not directly in a CMake COMMAND. This is for portability
reasons.
Directly executing a python script depends on non-portable shebang
logic and/or "default application" behaviour.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Fixes: #8380
This commit fixes the side-effect of PR #8211 where a 'ninja clean'
would try to remove dependency folders.
Changes:
- Symlinks are created during build and CMake targets now depends on
the symlinks. Thus, same behavior is achived with regards to
dependency handling, while at the same time, the output can be
cleaned as the dependencies are now attached to the symlinks.
- Dependencies have been changed so that generation of json files
depends on the trigger file and CMake depends upon the subdir txt
file. This prevents additional CMake runs after a clean.
Signed-off-by: Torsten Rasmussen <torsten.rasmussen@nordicsemi.no>
Both variables were used (with the same value) interchangeably
throughout CMake files and per the discussion in GH issue,
ZEPHYR_BASE is preferred.
Also add a comment with explanation of one vs. the other.
Tested by building hello_world for several boards ensuring no errors.
Fixes#7173.
Signed-off-by: Alex Tereschenko <alext.mkrs@gmail.com>
Zephyr currently allows users to choose a compiler optimization
between -O0, -Og and -Os, the default being the latter as it offers a
good compromise between speed and flash usage. In cases the speed
matters and/or the flash usage doesn't, optimizing for speed with -O2
is another alternative. For example in case of a simple application
doing cryptographic signature validation with mbedtls, the flash size
increase by about 15% compared to -Os, while it provides a 15% speed
boost for a RSA signature and 30% speed boost for a ECC signature.
This patches therefore adds a new option CONFIG_SPEED_OPTIMIZATIONS
corresponding to the -O2 flag, but keep the default set to
CONFIG_SIZE_OPTIMIZATIONS.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
It is currently not possible to define multiple compiler options using
the CONFIG_COMPILER_OPT Kconfig option. The string is interpreted as a
single quoted option, for example "-opt1 -opt2".
This patch fixes that by splitting the CONFIG_COMPILER_OPT string into
multiple options using the separate_arguments cmake function.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fixes: #8210
Following changes has been made to ensure correct behavior on different
system:
- Python script to detect changes to directories, including empty ones.
When files are modified the list is updated
If sub-directories are added / removed a trigger file is touched to
notify cmake to re-run
- Windows: To detect changes to header files in include for
parse_syscalls.py all files must be individual monitored.
Hence all headers are globbed added to dependencies.
CMake configure depends on the folders so the added /
removed files are picked up.
- Other: Folders are monitored through the python list file so that
added / remove / modified
Added / removed sub-directories are detected through trigger
file in order to re-run cmake.
Signed-off-by: Torsten Rasmussen <torsten.rasmussen@nordicsemi.no>
Fixes: #8210
This commit removes the need for always rebuild when generating the
syscalls.json.
It find the files and subfolders of the include directory and makes
syscalls depends on those.
To find added files / subfolders on all platforms CMake configure
is also depending on the folders found.
This ensures that added files / folders will also be detected at later
stages.
Signed-off-by: Torsten Rasmussen <torsten.rasmussen@nordicsemi.no>
