Functions z_spin_lock_valid and z_spin_unlock_valid are essentially
boolean functions, just change their signature to return a bool instead
of an integer.
MISRA-C rule 10.1
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The pointer arithmetic used didn't account for ARC
supervisor mode stacks, which are allocated at the
end of the stack object. Use the new macro to know
exactly how much space is reserved.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The k_spin_lock() validation was setting the new owner of the spinlock
BEFORE the actual lock was taken, so it could race against other
processors trying the same thing. Split the modification step out
into a separate function that can be called after we affirmatively
have the lock.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Currently thread abort doesn't work if a thread is currently scheduled
on a different CPU, because we have no way of delivering an interrupt
to the other CPU to force the issue. This patch adds a simple
framework for an architecture to provide such an IPI, implements it
for x86_64, and uses it to implement a spin loop in abort for the case
where a thread is currently scheduled elsewhere.
On SMP architectures (xtensa) where no such IPI is implemented, we
fall back to waiting on an arbitrary interrupt to occur. This "works"
for typical code (and all current tests), but of course it cannot be
guaranteed on such an architecture that k_thread_abort() will return
in finite time (e.g. the other thread on the other CPU might have
taken a spinlock and entered an infinite loop, so it will never
receive an interrupt to terminate itself)!
On non-SMP architectures this patch changes no code paths at all.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Add a note in the documentatation of _setup_new_thread()
function stating that the caller is responsible for
providing a size argument that corresponds to the availabe
thread stack area.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Straightforward spinlock around the global thread state. Two changes
to the locking strategy were needed:
1. There was a needless recursive lock taken in schedule_new_thread().
This is only ever invoked in circumstances where the lock was already
held, or where there is no need for internal synchronization.
2. The recursive irq_lock() around the loop that spawns the initial
static threads (which happens at the start of main thread execution)
was removed. Most of the job (i.e. making sure the threads don't run
before the loop is finished) was already duplicated by the sched_lock
it was already taking, and the attempt to promise that all the
timeouts happen on the same tick is already true by construction at
system startup on uniprocessor systems, and not possible to guarantee
at all under SMP (where other CPUs can take that timer interrupt). We
don't document or test for this feature, so don't try to be fancy.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Just like with _Swap(), we need two variants of these utilities which
can atomically release a lock and context switch. The naming shifts
(for byte count reasons) to _reschedule/_pend_curr, and both have an
_irqlock variant which takes the traditional locking.
Just refactoring. No logic changes.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The validation checking recently added to spinlocks is useful, but
requires kernel-internals like _current and _current_cpu in a header
context that tends to be needed before those are declared (or where we
don't want them declared), and is causing big header dependency
headaches.
Move it to C code, it's just a validation tool, not a performance
thing.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
These two spots were duplicating logic that is already done inside
_reschedule(), which is the cleaner, less dangerous API. Use it where
possible when outside the scheduler internals.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This adds a simple implementation of SMP CPU affinity to Zephyr. The
API is simple and doesn't try to invent abstractions like "cpu sets".
Each thread has an enable/disable flag associated with each CPU in the
system, and the bits can be turned on and off (for threads that are
not currently runnable, of course) using an easy three-function API.
Because the implementation picked requires enumerating runnable
threads in priority order looking for one that match the current CPU,
this is not a good fit for the SCALABLE or MULTIQ scheduler backends,
so it currently can be enabled only for SCHED_DUMB (which is the
default anyway). Fancier algorithms do exist, but even the best of
them scale as O(N_CPUS), so aren't quite constant time and often
require significant memory overhead to keep separate lists for
different cpus/sets.
The intended use here is for apps that want to "pin" threads to
specific CPUs for latency control, or conversely to prevent certain
threads from taking time on specific CPUs to leave them free for fast
response.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This API was using variable number of arguments. Which is not
allowed according to misra c guidelines(Rule 17.1). Hence making
this API into a macro and using the util macro FOR_EACH_FIXED_ARG
to get the same functionality.
There is one deviation from the old function. The last argument
shouldn't be NULL.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
If we just had the kernel's implementation, we could
just move this to lib/, but possible arch-specific
implementations dictate that we just make this a
syscall.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Now that this is known to be an unused value, remove it from the API.
Note that this caught a few spots where we were passing values (a
non-NULL wait_q with a NULL thread handle) that were always being
ignored before.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This feature was a useless noop based on mistaken API understanding.
The idea seems to have been that k_busy_wait() included guards to
ensure "clock_always_on" was true duing the loop, presumably because
the original author was afraid that "turning the clock off" would
affect the operation of k_cycle_get_32().
Then later someone came around and "optimized" this for Quark SE,
where the cycle counter is the RTC and unrelated to the timer driver
used by the clock_always_on feature. (Except even there it presumably
should have been done at the SoC level and not just in the C1000
devboard -- note that Arduino 101 never would have gotten this).
But it was all a mistake: "clock_always_on" has nothing to do with
en/disabling the system cycle timer (which never happens when the
system is active, that's a feature of idle), it's a control over the
delivery of timer interrupts. And needless to say we don't care about
timer interrupts when we're spinning on a cycle counter.
Yank the whole mess.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The existing API defined sys_clock_{hw_cycles,ticks}_per_sec as simple
"variables" to be shared, except that they were only real storage in
certain modes (the HPET driver, basically) and everywhere else they
were a build constant.
Properly, these should be an API defined by the timer driver (who
controls those rates) and consumed by the clock subsystem. So give
them function syntax as a stepping stone to get there.
Note that this also removes the deprecated variable
_sys_clock_us_per_tick rather than give it the same treatment.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The builtin function __builtin_umul_overflow returns a boolean and
should not checked as an integer.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Added k_thread_name_set() and enable thread name setting when declaring
static threads. This is enabled only when THREAD_MONITOR is used. System
threads get a name by default.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Several style and typo fixes in inline comments of arm kernel
files and thread.c.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Make while statement using pointers explicitly check whether
the value is NULL or not.
The C standard does not say that the null pointer is the same
as the pointer to memory address 0 and because of this is a good
practice always compare with the macro NULL.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
MISRA C requires that every controlling expression of and if or while
statement have a boolean type.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
A lot of times this API is called during some cleanup even if the
timeout was not set to make the code simpler. In these cases it's not
necessary checking the return. Adding a cast to acknowledge it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Move to more generic tracing hooks that can be implemented in different
ways and do not interfere with the kernel.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Define generic interface and hooks for tracing to replace
kernel_event_logger and existing tracing facilities with something more
common.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This enables reserving little space on the top of stack to store
data local to thread when CONFIG_USERSPACE. The first customer
of this is errno.
Note that ARC, due to how it lays out the user stack and
privilege stack, sets the pointer itself rather than
relying on the common way.
Fixes: #9067
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
irq_lock returns an unsigned int, though, several places was using
signed int. This commit fix this behaviour.
In order to avoid this error happens again, a coccinelle script was
added and can be used to check violations.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The errno "variable" is required to be thread-specific.
It gets defined to a macro which dereferences a pointer
returned by a kernel function.
In user mode, we cannot simply read/write the thread struct.
We do not have thread-local storage mechanism, so for now
use the lowest address of the thread stack to store this
value, since this is guaranteed to be read/writable by
a user thread.
The downside of this approach is potential stack corruption
if the stack pointer goes down this far but does not exceed
the location, since a fault won't be generated in this case.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Simplify k_thread_foreach API conditional inclusion by putting
the whole logic under CONFIG_THREAD_MONITOR config option.
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
The original implementation of CONFIG_THREAD_MONITOR would
try to leverage a thread's initial stack layout to provide
the entry function with arguments for any given thread.
This is problematic:
- Some arches do not have a initial stack layout suitable for
this
- Some arches never enabled this at all (riscv32, nios2)
- Some arches did not enable this properly
- Dropping to user mode would erase or provide incorrect
information.
Just spend a few extra bytes to store this stuff directly
in the k_thread struct and get rid of all the arch-specific
code for this.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
All other checks of thread_state use a bit wise & operator incase
there are other flags attached to the thread_state. Let's fix
the only outlier in _check_stack_sentinel() to be the same.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
We generalize querying the entropy driver directly with
a new internal API, which is now used by CONFIG_STACK_RANDOM
and stack canary initialization.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Very simple implementation of deadline scheduling. Works by storing a
single word in each thread containing a deadline, setting it (as a
delta from "now") via a single new API call, and using it as extra
input to the existing thread priority comparison function when
priorities are equal.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The various macros to do checks in system call handlers all
implictly would generate a kernel oops if a check failed.
This is undesirable for a few reasons:
* System call handlers that acquire resources in the handler
have no good recourse for cleanup if a check fails.
* In some cases we may want to propagate a return value back
to the caller instead of just killing the calling thread,
even though the base API doesn't do these checks.
These macros now all return a value, if nonzero is returned
the check failed. K_OOPS() now wraps these calls to generate
a kernel oops.
At the moment, the policy for all APIs has not changed. They
still all oops upon a failed check/
The macros now use the Z_ notation for private APIs.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Some kernel APIs may need to allocate memory in order to function
correctly, especially if they are exposed to userspace where
buffers provided by user code cannot be trusted.
Instead of simply drawing from the system heap, specific pools
may instead be assigned to threads, and any requests made on
behalf of the calling thread will draw heap memory from that pool.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The _thread_entry() is not really a part of the kernel but a part of
the zephyr's C runtime support library. Hence moving just the
function to lib/thread_entry.c
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Add k_thread_foreach API to iterate over all the threads in
the system.
This API can be used for debugging threads in multi threaded
environment to dump and analyze various thread parameters like
priority, state, stack address etc...
Signed-off-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Almost everywhere this was called, it was immediately followed by
_abort_thread_timeout(), for obvious reasons. The only exceptions
were in timeout and k_timer expiration (unifying these two would be
another good cleanup), which are peripheral parts of the scheduler and
can plausibly use a more "internal" API.
So make the common case the default, and expose the old behavior as
_unpend_thread_no_timeout(). (Along with identical changes for
_unpend_first_thread) Saves code bytes and simplifies scheduler
surface area for future synchronization work.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Now that other work has eliminated the two cases where we had to do a
reschedule "but yield even if we are cooperative", we can squash both
down to a single _reschedule() function which does almost exactly what
legacy _Swap() did, but wrapped as a proper scheduler API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
There was a somewhat promiscuous pattern in the kernel where IPC
mechanisms would do something that might effect the current thread
choice, then check _must_switch_threads() (or occasionally
__must_switch_threads -- don't ask, the distinction is being replaced
by real English words), sometimes _is_in_isr() (but not always, even
in contexts where that looks like it would be a mistake), and then
call _Swap() if everything is OK, otherwise releasing the irq_lock().
Sometimes this was done directly, sometimes via the inverted test,
sometimes (poll, heh) by doing the test when the thread state was
modified and then needlessly passing the result up the call stack to
the point of the _Swap().
And some places were just calling _reschedule_threads(), which did all
this already.
Unify all this madness. The old _reschedule_threads() function has
split into two variants: _reschedule_yield() and
_reschedule_noyield(). The latter is the "normal" one that respects
the cooperative priority of the current thread (i.e. it won't switch
out even if there is a higher priority thread ready -- the current
thread has to pend itself first), the former is used in the handful of
places where code was doing a swap unconditionally, just to preserve
precise behavior across the refactor. I'm not at all convinced it
should exist...
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
