Product URL: https://www.ti.com/product/CC1352P7
Datasheet : https://www.ti.com/lit/ds/symlink/cc1352p7.pdf
Features:
Powerful 48-MHz Arm® Cortex®-M4F processor
* 704KB flash program memory
* 256KB of ROM for protocols and library functions
* 8KB of cache SRAM
* 144KB of ultra-low leakage SRAM with parity for
high-reliability operation
* Dual-band Sub-1 GHz and 2.4 GHz operation
Updates:
* Remove CC1352P7_LaunchXL due to compliance checks
* Add CC1352P7 updates
* Update hal_ti for CC1352P7 support
* Remove blank line at end of modules/Kconfig.simplelink
* Split struct and typedef for pinctrl_soc_pin/pinctrl_soc_pin_t
* Reference cc13x2_cc26x2/pinctrl_soc.h
* Reference cc13x2_cc26x2/soc.h
Signed-off-by: Vaishnav Achath <vaishnav@beagleboard.org>
Update to the latest nrf52 HW models which include
a multitude of updates, including support for 802.15.4 in the
radio.
NOTE!: Requires the updated Babblesim v2 dev-phy API,
with the new Rx continuation on header evaluation mechanism.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This updates west.yml to pull the version of picolibc that includes both
the patches in #54391 as well as the fix providing compatibility for the
'deprecated' attribute when using GCC versions before 4.5, such as the GCC
based XCC compiler. Changes for 'weak' attributes were added to avoid using
inline asm statements for compilers that support the necessary attributes.
This commit is synchronized with Zephyr SDK:
https://github.com/zephyrproject-rtos/sdk-ng/pull/650
Signed-off-by: Keith Packard <keithp@keithp.com>
Update nanopb to the latest released version 0.4.7.
This fixes a recurring issue where the python-protobuf breaks with
the protoc compiler and forces a pure python implementation.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This commit updates revision of hal_nordic repository to bring the
latest changes in IEEE 802.15.4 driver.
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Just a minor fix in the edtt which mostly avoids
flooding the logs with exceptions in some error cases.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Crypto test-case 221 has a false negative, not passing because the ECC
family is disabled, not because of the key length.
Increase the timeout for the nRF5340/nRF9160 devices.
RSA keygen will sometimes take more than 90 seconds
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The commit resets MCUboot revision after zephyrproject-rtos/mcuboot
main branch has been overwritten with mcuboot/mcuboot main.
The reset has been done due to MCUboot fork history, in Zephyr,
has been broken and contained duplicate commits.
For details look at issue: #55303.
The reset of MCUboot also requires update to following repositories:
trusted-firmware-m
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Get blob support for cm0+ in hal_infineon
Updated revision of hal_infineon to:
8485083ad91d3e2cc5d706da3464716718a6a42e
Signed-off-by: Nazar Palamar <nazar.palamar@infineon.com>
Add support for several esp32s3 support on HAL, such as:
* I2C
* SPI
* Timer
* WDT
* LEDC
* MCPWM
* PCNT
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
Fix spiram WP_SD3 pin reference as that should be checked from efuse
values in case no customized number is set.
Fixes#54005
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Picolibc upstream has several fixes in the cmake build scripts that are
useful when compiling with clang. Move the picolibc revision forward to
include all of those changes.
Signed-off-by: Keith Packard <keithp@keithp.com>
This commit updates hal_nordic revision to bring the latest changes in
nRF IEEE 802.15.4 radio driver.
Signed-off-by: Artur Hadasz <artur.hadasz@nordicsemi.no>
Updates EDTT to newest version and adds the new test cases
Update _controller_tests_inner.sh to support using packet inspection
and the new low-level device feature in EDTT
Build configs for the BSim test apps updated to support extended
advertising
Signed-off-by: Troels Nilsson <trnn@demant.com>
Use latest STM32 HAL to have the new STM32F1xx PWM inputs.
Also update the existing boards with correct new PWM outputs definition
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Includes changes to allow Zephyr to avoid building the initial
attestation service at build time.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Fix SAU configuration on U5 to allow non secure application to use
end of flash which is not used by secure.
Fixes#53231
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Update TF-M from 1.6.0 to 1.7.0
Update MBedTLS from 3.1.0 to 3.2.1.
Updates the cmake wrapper for changes introduced in TF-M 1.7.0.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Signed-off-by: David Brown <david.brown@linaro.org>
Picolibc version 1.8 was recently released. This release includes
a bunch of patches made to support Zephyr.
Signed-off-by: Keith Packard <keithp@keithp.com>
The CAAM hardware needs to read RNG values into a non-cache
buffer. Since the contract to Zephyr RNG functions do not
require non-cache buffers, we use an intermediate non-cache
buffer to retrieve results.
Added a Kconfig to control the size of the intermediate buffer.
Fixes#53035
Signed-off-by: David Leach <david.leach@nxp.com>
The nRF HW models have been updated to correspond to a 52833 instead
of a 52832. Let's follow them.
The motivation for the change is to enable proper BIS encryption support
(for BT LE Audio ISO).
Changes:
* Point in manifest to latest HW models
* SOC_COMPATIBLE_NRF52832 has been removed, and SOC_COMPATIBLE_NRF52833
added in its place (with no uses at this point)
* Where SOC_COMPATIBLE_NRF52832 was used to set encryption like for a 52832
(to avoid using the MAXPACKETLENGHT), we set the condition to just
SOC_NRF52832.
Note: The MAXPACKETLENGHT register exists in the new simulated nrf52833,
thought it does nothing.
* In the BLE ctrl LLL radio HAL, all macros are renamed accordingly
(timings are NOT changed).
* Board dts definition now refers to the 52833 soc definition. New 52833
features set as not supported by now.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Pull mcuboot change which refactor sys_clock_disable to only be called
when the system clock driver supports this feature.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Point to the modified version of hal_stm32 which allow to use
ETH HAL V2 on stm32F7.
Update zephyr driver to allow it.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Cancelling transfers on suspend contradicts Universal Serial Bus
Specification Revision 2.0, 9.1.1.6 Suspended:
* When suspended, the USB device maintains any internal status,
including its address and configuration.
The internal status definitely includes any pending USB transfers.
If there is a class that wants to cancel transfer on suspend, then the
cancel should be initiated by the class, not the device stack itself.
Update hal_nordic to a version that does not abort all endpoints at
suspend. It seems that aborting endpoints on suspend in nrfx driver was
the actual reason why transfers were canceled on suspend.
Remove transfer retriggering on resume from CDC ACM and Bluetooth class
implementations because transfers are no longer cancelled on suspend.
Other classes do not have any suspend related workarounds implemented.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Update usage of zephyr_code_relocate to follow new API. The old method
of relocating a file was the following directive:
zephyr_code_relocate(file location)
The new API for zephyr_code_relocate uses the following directive:
zephyr_code_relocate(FILES file LOCATION location)
update in tree usage to follow this model. Also, update the NXP HAL SHA,
as NXP's HAL uses this macro as well.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This commit updates all deprecated `CONFIG_LIB_CPLUSPLUS` usages to:
* check if the Zephyr minimal C++ library is enabled using
`CONFIG_MINIMAL_LIBCPP` instead of relying on the
`CONFIG_LIB_CPLUSPLUS`-based inference.
* select `CONFIG_REQUIRES_FULL_LIBCPP` when there exists a component-
level C++ standard library dependency. This allows a component to
declare C++ standard library dependency without designating a
specific libray implementation.
* select the correct type of C++ standard library implementation to use
through one of the `CONFIG_LIBCPP_IMPLEMENTATION` choices.
Signed-off-by: Stephanos Ioannidis <stephanos.ioannidis@nordicsemi.no>
Update NXP HAL to latest revision. Commit
3e4406d98272dd53d623e4df8cc96ee040120312 within the NXP HAL broke builds
for some NXP platforms, so this manifest update will allow Zephyr to
skip that broken SHA.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
This removes the tinycbor module and replaces references in it
e.g. in sample text to use the zcbor replacement.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Update TF-M version which remove the downstream patch and replaces it
with the upstream TF-M patch for masking MBedTLS build warning of
unused const variable.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Following updates previously done for other drivers, rename all
occurrences of S32 to NXP S32 to avoid ambiguity.
Signed-off-by: Manuel Arguelles <manuel.arguelles@nxp.com>
hal_espressif systimer HAL calls are based on 1MHz reference.
This changes systimer driver to allow max clocking reference of 16MHz
and increases soc tick resolution by reducing min delay interval.
This also sets all ESP32-C3 socs to 16MHz hardware cycles reference.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
