Commit graph

15 commits

Author SHA1 Message Date
Marek Matej f86a7d2c25 drivers: dac: esp32: Add support for DAC controller
Initial DAC driver for the ESP32/ESP32-S2 SOCs

Signed-off-by: Marek Matej <marek.matej@espressif.com>
2022-12-13 16:29:38 +00:00
Marek Janus 6505cbc085 drivers: dac: add mcp4728 driver
MCP4728 is a 12-bit, Quad Digital-to-Analog Converter with EEPROM Memory.
Controlled via I2C interface.

Signed-off-by: Marek Janus <marek.janus@grinn-global.com>
2022-04-28 14:17:34 +02:00
Gerard Marull-Paretas 95fb0ded6b kconfig: remove Enable from boolean prompts
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:

sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*

Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
2022-03-09 15:35:54 +01:00
HaiLong Yang ba9c3a4d88 drivers: dac: introduce gd32 dac driver
Add DAC driver for gd32 series SoCs.

Signed-off-by: HaiLong Yang <cameledyang@pm.me>
2021-12-16 10:13:56 +01:00
Maureen Helm 9eef764c65 drivers: dac: Refactor drivers to use shared init priority
Refactors all of the DAC drivers to use a shared driver class
initialization priority configuration, CONFIG_DAC_INIT_PRIORITY, to
allow configuring DAC drivers separately from other devices. This is
similar to other driver classes like I2C and SPI.

The default is set to CONFIG_KERNEL_INIT_PRIORITY_DEVICE to preserve the
existing default initialization priority for most drivers. The
exceptions are dacx0508, dacx3608, and mcp4725 drivers which have
dependencies on SPI or I2C drivers and must therefore initialize later
than the default device priority.

Signed-off-by: Maureen Helm <maureen.helm@intel.com>
2021-10-27 10:58:33 +02:00
Piotr Mienkowski 2f17bd8e6b drivers: Add Atmel SAM DAC (DACC) driver
Add Digital-to-Analog Converter driver (based on DACC module) for Atmel
SAM MCU family. Only SAME70, SAMV71 series devices are supported in
this version.

Tested on Atmel SMART SAM E70 Xplained board.

Origin: Original

Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
2021-08-26 16:46:16 -04:00
Kieran Mackey 38ed9c885e drivers: dac: added driver for Microchip MCP4725
The MCP4725 is a single channel 12 bit DAC. It is controlled via I2C.

Signed-off-by: Kieran Mackey <kieran.mackey@lairdconnect.com>
2021-05-06 11:07:33 -05:00
Matija Tudan 1463596205 drivers: dac: added driver for TI DACx3608
The DAC53608 and DAC43608 (DACx3608) are lowpower, eight-channel,
voltage-output, 10-bit or 8-bit digital-to-analog converters (DACs)
respectively. They support I2C with a wide power supply range
from 1.8 V to 5.5 V, and a full scale output voltage range of
1.8 V to 5.5 V. The DACx3608 also includes per channel, user
programmable, power down registers.

Signed-off-by: Matija Tudan <mtudan@mobilisis.hr>
2021-01-24 14:28:05 -05:00
Kwon Tae-young 2aeed81202 drivers: dac: Added driver for TI DACx0508
TI's DACx0508 is a DAC chip that supports SPI.
Gain and Reference can be set through the register.

Signed-off-by: Kwon Tae-young <tykwon@m2i.co.kr>
2020-08-26 12:24:43 +02:00
Michael Hope 2b6783aa15 drivers: dac: add a driver for the SAM0 DAC
The Atmel SAM0 DAC is a single channel 10 bit DAC with selectable
reference.

Signed-off-by: Michael Hope <mlhx@google.com>
2020-08-04 16:08:48 -05:00
Anas Nashif ee985d81aa shell: enable modules by default if shell is enabled
If shell is enabled then enable all sub-shells if their dependencies are
satisfied. This was done for some modules and subsystems but was not
consistent.

Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2020-06-24 21:37:12 -04:00
Henrik Brix Andersen 8a5ba4539c drivers: dac: add DAC shell commands
Add shell commands for controlling digital-to-analog (DAC) devices.

Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
2020-05-01 12:35:50 -05:00
Henrik Brix Andersen 20b565a9f3 drivers: dac: add driver for the NXP Kinetis DAC32
Add driver shim for the NXP Kinetis Digital-to-Analog (DAC32) module.

Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
2020-05-01 12:35:50 -05:00
Martin Jäger 414527926d drivers: dac: Add support for STM32L0 series
First implementation for STM32L0 series MCUs to be used for testing.

Signed-off-by: Martin Jäger <martin@libre.solar>
2020-04-20 17:41:48 +02:00
Martin Jäger 33228f516b drivers: dac: Add API for DAC peripherals
DAC (digital to analog converter) peripheral driver with a generic API
suitable for most MCUs (only basic DAC features considered).

Signed-off-by: Martin Jäger <martin@libre.solar>
2020-04-20 17:41:48 +02:00