This commit adds mbox sample support for these NXP boards:
- MIMXRT1160-EVK
- MIMXRT1170-EVK
- MIMXRT1170-EVKB
Signed-off-by: Tomas Galbicka <tomas.galbicka@nxp.com>
Change bin name to esp32_appcpu_firmware instead of
esp32_net_firmware to keep naming coherence.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
SOC_ESP32_NET is now SOC_ESP32_APPCPU, following espressif's
naming convention in the same manner as ESP32S3 app cpu.
SOC_ESP32_APPCU is now a subset of SOC_SERIES_ESP32.
This commit also changes the necessary files, samples and tests
for bisect purposes.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
With extremely small displays (much smaller than 64x24), the
calculation of the blocks in the four corners fails. These
might then be too large and no longer fit into the available
area of the small displays.
Signed-off-by: Stephan Linz <linz@li-pro.net>
In exceptional cases, monochrome displays can deviate from the
general interpretation (PIXEL_FORMAT_MONO01) of a logical 1 as
pixel on (white) and 0 as pixel off (black) and instead set the
capability to PIXEL_FORMAT_MONO10. This small but significant
difference has been ignored so far, resulting in an inverse
display for those displays. In order to be technically correct
here, the buffers for a "white" background should be set to 0
instead of 1 and for "black" to 1 instead of 0.
Signed-off-by: Stephan Linz <linz@li-pro.net>
Rounding errors due to the division of non-integrally divisible
buffer sizes lead to the loss of one byte. This can be avoided
with the DIV_ROUND_UP() macro.
Signed-off-by: Stephan Linz <linz@li-pro.net>
Make sure that the flash partition is valid.
With TF-M enabled the storage_partition can be used as memory that is
known to be configured as non-secure flash region.
The slot1_ns_partition partition is only correct when TF-M is built
with BL2 enabled.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Print a finished message, so that it is clear that this in the end
of the sample. This makes it certain that we didn't crash without
output on the last test.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Stop erasing outside of the test partition.
We shouldn't really on this being accesible memory.
This region may be consider as secure when application is non-secure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The patch updates README with detailed description of the requirements
regarding target devicetree needed to correctly build the sample.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
When commit 5b4f4253c1 introduced
"nordic,qspi-nor" dts binding the sample wasn't aligned to the change.
From that moment the sample started to be filtered out by the Twister.
The patch adds Nordic's compatible to the test filter.
Signed-off-by: Adam Wojasinski <adam.wojasinski@nordicsemi.no>
The espi_saf.h header has a dependency on the eSPI driver supporing SAF.
Guard the include to fix builds of the Nuvoton eval boards.
Signed-off-by: Keith Short <keithshort@google.com>
Removes support for the deprecated features of having a prj file
which has the board name on the end of it. Board Kconfig fragments
should be used instead.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
For all remaining samples which now set their integration platform
as native_posix(_64) switch them to native_sim(_64)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Refer to the native_sim overlay instead of the native_posix one,
as native_posix is going to be deprecated soon.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
All in-tree touchscreen drivers have been migrated over to input, the
compatibility node has been removed from those boards as well, this
sample can be dropped now.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Do not enable subsystem/driver shell modules by default and stop abusing
CONFIG_SHELL_MINIMAL, which is internal to the shell subsystem, to decide
when to enable a driver shell.
The list of shell modules has grown considerably through the
years. Enabling CONFIG_SHELL for doing e.g. an interactive debug session
leads to a large number of shell modules also being enabled unless
explicitly disabled, which again leads to non-negligible increases in
RAM/ROM usage.
This commit attempts to establish a policy of subsystem/driver shell
modules being disabled by default, requiring the user/application to
explicitly enable only those needed.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
In the docs replace the references to native_posix with native_sim.
Enable this test in natives_sim.
And switch the default test platform to native_sim from native_posix.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
In the docs replace the references to native_posix with native_sim
Enable native_sim in the tests, and replace native_posix as integration
platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add support for low power mode on the G1120B0MIPI using the RT595. This
configuration is tested via a testcase in samples/drivers/display, which
should validate that the display can be driven by the RT595 when
CONFIG_PM and CONFIG_PM_DEVICE are set.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Change the variable name from **us** to **ms** and increase its size
to **uint16_t** within the min_alarm_handler function. This update
allows the function to correctly handle the millisecond values in the
range of 0 to 999.
Signed-off-by: Charles Dias <charlesdias.cd@outlook.com>
Twister treats board revisions as separate boards, so s32z270dc2_r52
revision D must be added to the filters.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
Add the stm32-ospi-nor or stm32-qspi-nor compatible to run the sample
on stm32 boards without jedec,spi-nor compatible.
No more config file needed to get the jedec ID and SFDP info from the
external quad- or octo-SPI flash of the stm32 disco boards.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Unify spelling of CAN Flexible Data-rate abbreviation to "CAN FD" instead
of "CAN-FD". The former aligns with the CAN in Automation (CiA)
recommendation.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
README now cross-references the lora receive sample
so that both can be used together more easily.
Signed-off-by: ingram weeks <ingram.weeks@gmail.com>
This commit adds a sample which configures a GNSS modem
to enable all available systems, registers callbacks to
the GNSS data and satellites callbacks, and prints the
GNSS data and satellites from the callbacks when invoked
using printk.
Signed-off-by: Bjarki Arge Andreasen <bjarkix123@gmail.com>
Convert this sample application build to sysbuild,
and add support for the nrf5340bsim target.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
PM should not be enabled by default at the soc level. This is an
application decision and not a platform decision whether to enable or
disable PM features.
Enabling PM by default will result in descripencies and test scope and
failures in tests that do not account for PM being enabled.
Fixes#60359
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Instead of forcing use of NEWLIB_LIBC, select any available complete C
library implementation. Add CONFIG_REQUIRES_FLOAT_PRINTF and adjust
CONFIG_LIBC_MALLOC_ARENA_SIZE as needed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Add ADC support for longan nano.
Tested using samples/drivers/adc. Also added longan_nano.overlay
and updated documentation.
Signed-off-by: Maxin John <maxin.john@gmail.com>
The flash sample and flash shell have implementations that differ
providing similar features.
This commit removes all the code in main.c, only `main()` remains to
reduce redundancy.
Features or improved implementations has not been merged into the flash
shell in this commit.
It should be possible to do in future commits if desired.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
