Adds use of CHARGER_PROP_DISCHARGE_CURRENT_NOTIFICATION and
CHARGER_PROP_SYSTEM_VOLTAGE_NOTIFICATION_UV to the charger
sample application.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Moves the charger API sample app from samples/charger/ to
samples/drivers/chargers/ as mentioned in issue #65032.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Check for BASS and PACS, while scanning for
Broadcast Audio Sinks was wrong in the
Broadcast Audio Assistant sample.
Signed-off-by: Lars Knudsen <LAKD@demant.com>
40k heap size is not enough and results in handshake errors:
<err> net_sock_tls: TLS handshake error: -0x2700
Increasing it to 55k already works (when used with native_sim_64 and
offloaded sockets), but use 60k to get a bit more room for future.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Current SPIRAM sample code tries to search for any available
heap, causing this test to fail. Make sure the sample code
only malloc data from external ram.
Fixes#65997
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Remove mimxrt595_evk_cm33 from the MBOX sample. Although this SOC has
support for both cores, there is no support in tree for booting the
secondary core from the primary one, so this sample cannot run on
hardware.
Fixes#69092
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
For this targets, the widgets demo run out of heap and crashes.
Let's just increase the heap size.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix missing support for PAST in the broadcast audio sink
sample, where it previously failed to request PAST from
the broadcast assistant by not setting the PA state to
BT_BAP_PA_STATE_INFO_REQ.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Increases some of the timeouts so that when using this sample
against other interactive devices (such as a phone or the
Zephyr audio shell), then it's easier to do it in time.
Also updates a few of the printks and ensures that we are not
doing name filtering when we have been requested to sync to
a specific broadcast source by a broadcast assistant.
The test for the sample has also been modified to have a longer
timeout to accomodate for the new semaphore timeout values.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The log2 prefix was deprecated and changed to log some time ago,
but log2_generic() seems to have been inadvertantly left with
the old prefix.
Rename log2_generic() to log_generic() to follow suit.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
The Broadcast Assistant API should be fully independent of the scan
delegator. Therefore the new struct bt_bap_bass_subgroup has been
defined to avoid a dependency.
Fixes: #68338
Signed-off-by: Ping Wang <pinw@demant.com>
In error cases, where send_data() returns early, the allocated net_buf
is not free'd, causing a memory leak affecting the net_buf pool.
Fix this by freeing the allocated net_buf before returning early
from send_data().
Signed-off-by: Sean Farrelly <sean.farrelly@outlook.com>
The thrift methods loadCertificateFromBuffer(),
loadPrivateKeyFromBuffer(), and
loadTrustedCertificatesFromBuffer() expect a null-terminated
string.
Append '\0' to each array used to hold a certificate in
thrift samples and tests.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Add missing service data for BASS for the broadcast audio sink
sample.
This also required the controller to increase its maximum data
length. Increased more than minimum required so that the name
can be changed without needing to increase this again.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The bt_iso_chan_send function could take an optional
timestamp by using 0 as an indicator. The issue with
this approach was that a timestamp value of 0 is valid,
and could cause potential issue with syncing streams
in a group.
To fully support transmitting with and without timestamp,
bt_iso_chan_send_ts has been introduced, which is the only
function of the two (bt_iso_chan_send being the other) that
supports timestamps.
A new function, rather than adding a boolean to the existing,
was chosen as it simplifies the individual functions as well
as making it more explicit what the function does.
Since the bt_iso_chan_send function is used by LE audio, both
the BAP and CAP send functions have similarly been updated.
Likewise, all tests and samples have been updated to use the
updated function(s), and BT_ISO_TIMESTAMP_NONE has been
removed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
UAC2 explicit feedback sample currently fails twister device testing
with timeout. It is not really clear what twister expects to see on the
serial output when running the sample. Because there is no meaningful
way of testing USB <-> I2S communication, mark the sample with TBD
harness to silence the timeout.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
The defines from the Bluetooth Audio assigned numbers are not
specific for LC3. This commit removes the LC3 infix and
the reference to LC3 in the documentation for them.
It also cleans up some of the documentation and
names of the enums.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This update the echo_client configurations for the atsamr21_xpro board
to match same configs defined at echo_server.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
In the Zephyr v3.5 to build the net samples pair echo-server/client the
SRAM requirements increased for the atsamr21_xpro board when passing
-DEXTRA_CONF_FILE=overlay-802154.conf argument. This adjusts example
features to free necessary SRAM to build and run the example.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
This commit adds support for NXP board LPCXpresso55S69 for mbox.
- samples/drivers/mbox/ - mbox signaling mode
- samples/drivers/mbox_data/ - mbox data transfer mode
- tests/drivers/mbox/mbox_data/ - mbox test to verify functionality.
Signed-off-by: Tomas Galbicka <tomas.galbicka@nxp.com>
Define the reg and size property for the stm32 boards with qspi inside
Refer to the dts/bindings/flash_controller/st,stm32-ospi-nor.yaml.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Convert the network log backend to use socket API instead of
net_context API. This allows the backend to be used also
with socket offloading network drivers.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Both advertiser and scanner demonstrate the use of extended advertising
and scanning, and how to gracefully restart the extended advertisements
through the use of recycle() callback. In the sample, the advertiser
initiates a connectable advertisement set, which prompts the scanner to
connect. After the connection is established, the advertiser waits for
5 seconds to disconnect. After the connection is dropped, the advertiser
immediately restarts broadcasting, while the scanner cools-down for
5 seconds to restart its process.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
The sample illustrates how to calculate feedback value based on I2S
sample clock measurement or indirect I2S FRAMESTART and USBD SOF.
The sample is currently only supported on nrf5340dk_nrf5340_cpuapp
target because the feedback measurement uses target specific
peripherals.
While it should be possible to perform feedback value calculation
entirely in software (possibly with some additional filtering due
to software scheduling jitter), the I2S API does not provide necessary
timestamps.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Introduce new USB Audio 2 implementation written from scratch. Main goal
behind new implementation was to perform entity configuration with
devicetree bindings, hiding the descriptor complexity from application.
Initial implementation is working at Full-Speed only. High-Speed support
will come later, but even at Full-Speed only this is viable replacement
for old stack USB Audio 1 class (USB Audio 1 is limited to Full-Speed by
specification, i.e. it is explicitly forbidden for USB Audio 1 device to
work at High-Speed).
Implemented is only absolute minimum set of features required for basic
implicit and explicit feedback samples. Only one sample frequency is
currently supported. Optional interrupt notifications are not supported.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
The normal and posix philosophers samples seemed to have
a number of redundant choices in prj.conf.
Let's reduce to the minimum required for the sample. The
CONFIG_DEBUG_THREAD_INFO option is part of the
documentation, so leave it as-is.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
The number of forks should match the number of philophers, and
that is encoded via NUM_PHIL.
Change the build assert to match.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
The tag 'introduction' was misspelled 'inroduction'.
Correct it both the samples/philosophers and the
samples/posix/philosophers directories.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Previously, the POSIX shell utilities were intermixed with the
POSIX API implementation.
The POSIX shell utilities only depend on the public POSIX API,
so it makes sense to keep them in a separate subdirectory.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Added USB Audio output for the Broadcast Sink sample. In addition
offloading of the LC3 codec was also made. The sample supports only
mono, and a KConfig option was added to configure which audio
location to sync to.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
bt_pbp_parse_announcement was defined as uint8_t return value function,
but returned errno values, so it was modified to return an int instead.
The return values are also now more granular and documented.
The function also triggered a coverity issue with the way that it
parsed the data->data, as it would be marked as tainted. This should
be fixed by using the net_buf_simple API, which also improves on
some other parts of the code.
Finally the meta argument for the function was changed from an
unknown sized buffer, where the caller somehow had to know the
size of the metadata before calling the parsing function, to
an output pointer. This also omits the requirement for the
caller to always copy the metadata, where now it just
gets a pointer to the metadata in the bt_data struct. The application
can now always decide whether to continue to parse the metadata or
to copy it, using the pointer and the return value of the function.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The x-nucleo-iks01a3 shield is equipped with a DIL24 socket where
different compatible sensors may fit. This commit add support to
lis2de12 on DIL24 in such a way that, if sensor is not present, test
would just skip it and proceed. Other sensors may be added in future.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
Adds CAN drivers for XMC4xxx SoCs.
XMC4xxx has multiple CAN nodes. The nodes share a common clock and
a message object pool.
The CAN nodes do not have a loopback mode. Instead there is an
internal bus which can be used to exchange messages between
nodes on the SoC. For this reason tests/samples which rely on the
loopback feature have been disabled.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
