Added pytest_dut_scope keyword under harness_config section.
New keyword is used to determine the scope of dut and shell
fixtures in pytest-twister-harness plugin.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Do not break processing when incorrect coverage data are received.
Instead, report failures but still process valid data.
Include coverage processing status within twister retrun code.
Signed-off-by: Piotr Kosycarz <piotr.kosycarz@nordicsemi.no>
When coverage is enabled, gather console logs longer
to receive gcov data which are send after test output.
Signed-off-by: Piotr Kosycarz <piotr.kosycarz@nordicsemi.no>
Very verbose log message without too much context that should be a debug
message rather than a info().
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
An urforseen error was introduce with #62713. When "--device-testing"
or "--filter runnable" is used in CLI, twister will skip tests which
cannot be executed (not just built) on a given platform. If a given
platform is among integration platforms it will cause an error.
However, it shouldn't be the case. Such skip is intentional and
shouldn't be an error. Fixed by assigning an existing Filter.CMD_LINE,
which is exempted from being turned to error.
fixes: #63844
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Reset TestInstance status when ProjectBuilder.run() is called
to run the test after its successful build, so the build status
will not propagate as the run status if the run fails.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Fix the Twister Console harness ordered 'multi_line' and 'one_line'
pattern matching to treat the ztest as failed when not all of the
expected patterns were found in the console output, but the ztest
application itself reports 'PROJECT EXECUTION SUCCESSFUL'.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
If flash_order were to be missing from the YAML, the Domains init
would crash instead of substituting an empty list.
This commit fixes that.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
By requiring a full-on YAML fragment, the Domains class can rely on
pykwalify to do the heavy lifting with validating types and structure.
Remove support for loading domains from a dictionary, so that we don't
ever have to replicate the same checks on the input, and we can instead
have a single entry point.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Do extra checks to reject inconsistent `domains.yaml` contents early:
default: app
build_dir: /path/to/build
domains:
- name: image_1
build_dir: /path/to/build/image_1
- name: image_2
build_dir: /path/to/build/image_2
flash_order:
- image_1
- image_2
- unknown
This example lists "image_1" and "image_2" as known domains, but an
entry for the default "app" is missing, which should never be allowed.
A valid `domains.yaml` file shall also not contain extra domains under
`flash_order`, such as "unknown", which doesn't appear under `domains`.
Either of these cases can now be caught while initializing an instance
of the Domains class.
It follows that a valid `domains.yaml` file must always contain a list
of domains with at least one entry - the default image. Since `default`
is a required key in the YAML schema, `domains` should be required too.
Thus, empty lists will be rejected by pykwalify, so the questionable
warning for "no domains defined; this probably won't work" can be axed.
Fixes#63166
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
When using a quarantine file with more than 512 unique
entries, than time of matching quarantine increases
significantly. This is because regexp cache size is
512. Add precompiled regexp entries to the quarantine
as a fix.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
All handlers except QEMU were right-stripping console lines before
checking them. In certain cases where the regex is expecting the
whitespace, this could make the test fail on qemu when it is passing
on something else. Change QEMUHandler to us .rstrip instead of .strip()
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
In PR #62947 a timeout variable was replaced with a method,
but this timeout was used in another place to start
pytest subprogram. This commit provides a fix.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Test suites names are not being handled uniformly for tests not
in zephyr tree. Their names depend on -T arg used in twister's CLI.
The newly added options allow to select if twister should add paths
to suite names. This is needed if test plans are to be used for tests
outside of zephyr tree.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
"Path" is a path (relative to zephyr) to a directory with test suite's
definition. Such entry helps to locate a given test.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
In test-only mode with a hardware map, all tests with fixtures were
skipped, even when the hardware map has appropriate fixtures defined.
TestPlan.load_from_file had the check for fixtures missing, but actually
best is that the TestInstance checks the fixtures in the hardware map.
Signed-off-by: Manoel Brunnen <manoel.brunnen@ithinx.io>
Twister allows us to control maximum execution time for each test
with timeout value in test's .yaml configuration and
platform level timeout multiplier which allows us to tweak
timeout value for specific platform.
However, sometimes we want to additionally adjust tests timeouts
when running twister. This is especially useful in case of
simulation platform as simulation time may depend on the host
speed & load, we may select different (i.e. cycle accurate but
slower one) simulation method, etc...
Let's introduce global (twister-level) timeout multiplier option.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
The recent support for BUILD_ONLY images was implemented by excluding
them from `domains.yaml`, in order to crudely prevent them from being
picked up by `west flash`. Arguably, this is incorrect or unexpected,
because the sysbuild documentation defines a "domain" as:
Every Zephyr CMake build system managed by sysbuild.
Another consequence is that, given a build-only `<image>`, this makes it
impossible to pass `--domain <image>` to `west flash`, `west debug`, and
ironically `west build`.
To fix that, `domains.yaml` should again represent all domains, and the
build-only ones should be indicated in another way. Enter `flash_order`:
a new top-level key in the domains YAML schema. It contains the default
sequence of images used by `west flash`, where the build-only images are
excluded, and the order is influenced by `sysbuild_add_dependencies()`.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
Added application based on SMP Server Sample. Application is built together
with MCUboot using sysbuild and is flashed onto device in one step.
Tests are automated with pytest - new harness of Twister.
The image for upgrade is prepared using west sign command
then is uploaded by mcumgr into device and tested.
Automated scenarios to test upgrade (image upload, test, revert, confirm),
to test downgrade prevention mechanism and to test upgrade with image,
that is signed with an invalid key.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Currently, when a Robot test is run, the test case status value is
reported as `None`, which causes the XML to contain information about
the test being skipped due to misconfiguration.
This commit fixes the value reported in Twister XML test result by
assigning the test result to the `status` variable of a testcase
instance after the test has finished running.
Signed-off-by: Franciszek Pindel <fpindel@internships.antmicro.com>
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
This is coming from devicetree and corrosponds to what we have in the
dts/bindings/vendor-prefixes.txt file.
This will allow for static filtering, especially with twister, i.e. no
need to build anything to know the vendor of a board
All of the vendor data was extracted automatically from the devicetree,
so some platforms might not have the right vendor or no vendor at all
right now, we need to fix some of the DTS information or do this
manually to get this 100% correct. But we are close.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a new option --vendor which allows filtering by vendors tracked in
the board/platform yaml file. The vendor string is compatible with DTS
and is what we have in dts/bindings/vendor-prefixes.txt.
Providing multiple vendors is also supported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Only impacts on twister-pytest scenarios. Exec command is waiting for
the prompt message, but in some cases, e.g. after reseting the DUT, prompt
can be followed by another strings. Solution is to clear internal serial
buffer and to not request the prompt string before executing a command.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Sometimes you might need exec_command() to return an value from
running device. If the output contains shell prompts or logger
output, it is harder to capture the value.
Filter away the lines we thing belongs to the shell prompt or
normal logging output.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Skips are turned to errors on integration platforms. However, if
a user (or a CI) selects toolchain other than zephyr, unexpected
errors due to skips can appear. With this commit skips due to
toolchain incompatibilities are not treated as errors.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
If coverage is provided by a different platform not in the integration
list, it should not be reported as error.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove dead and erroneous (DUT is not a dict) if branch. Simply use the
self.options.platform list. Which is filled by either the hardware map
or the '--platform' option.
This change addresses issue #62723 and #62560.
Signed-off-by: Manoel Brunnen <manoel.brunnen@ithinx.io>
Before only with --integration such skips were changed to errors.
This hinders issues when twister is call with --all flag in CI
and new skips on integration platforms are not caught. Then those
skips cause errors in other PRs when --integration was used.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
The value of emulation_platforms is a bool corresponding to
--emulation-only CLI option. Therefore, it should be registered
as Filters.CMD_LINE. Without it, twister raises errors when an
integration platform is descoped due to this option.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Added an exception to scl.py module, to not process an empty
yaml file, because of error from pykwalify. New exception
is handled when processing quarantine files, to allow
an empty file.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Simple refactoring aiming to reduce the average method length.
Minor corrections of the handlers module, removing wholly unused
variables, etc.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Allow to specify a list of pytest directories, files or subtests
with pytest_root keyword in test yaml.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Fixtures in pytest-twister-harness plugin are moved to one
file to simplify adding new fixtures in the future - no
need to add pytest_plugins entry and register asserts.
Moved also shell fixture from sample dir, because that
fixture can be reused in new tests.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
If pylib twister harness reads bytes that can't be decoded to Unicode,
it would raise an exception at a separate "serial reader" process, that
would fail without any warning.
This patch uses "errors='replace'" parameter for Python str.decode()
method, so that this doesn't happen.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Previously, only the main src/ directories was scanned for
ZTest testsuite names and tests. This allows us to place
test sources in subdirectories as well.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Add support handling quotes for configuration options in extra args by
escaping them properly instead of removing the quotes altogether. For
other options in extra_args quotes are removes as usual.
Add similar support in west build command also.
Add a unit test to check this functionality.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Add tests which use pytester to call pytest with pytest-twister-harness
plugin on previously defined test. This gives a possibility to test
plugin in end-to-end variant.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
According to new adapters API add new tests which verify their
correctness. Introduce some minor naming changes to describe better
their role.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Add better description of available options and add actions which
should help to prevent from passing invalid options to plugin.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Remove log.py and by this logging configuration from
pytest-harness-plugin. Instead use pytest options for setting verbosity
and format of printed logs. Thanks to this management of verbosity
level can be easier for users.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Create helper class Shell which can be used in tests which require
interaction with shell application.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Move helper.py file content to utils.py file in device directory,
where those helper functions are used.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
