When some header are included into C++ source file, this kind of
compilations errors are generated:
error: invalid conversion from 'void*'
to 'u32_t*' {aka 'unsigned int*'} [-fpermissive]
Signed-off-by: Benoit Leforestier <benoit.leforestier@gmail.com>
Under Unshared FP register mode we are not stacking the
FP context in exception entries, so we do not need to
include the FP registers bank in the exception stack
frame structure.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This reintroduces support for static service in the form of a new API,
BT_GATT_SERVICE_DEFINE, and changes the internal services (GAP/GATT)
to be defined as const as they are never register/unregistered.
Internal service needed to be renamed in order to keep the same order
as before since the section elements are sorted by name.
The result is the following (make ram_report):
before:
gatt.c 572 0.66%
cf_cfg 32 0.04%
db 8 0.01%
db_hash 16 0.02%
db_hash_work 32 0.04%
gap_attrs 180 0.21%
gap_svc 12 0.01%
gatt_attrs 160 0.18%
gatt_sc 80 0.09%
gatt_svc 12 0.01%
sc_ccc_cfg 32 0.04%
subscriptions 8 0.01%
after:
gatt.c 210 0.24%
cf_cfg 32 0.04%
db 8 0.01%
db_hash 16 0.02%
db_hash_work 32 0.04%
gatt_sc 80 0.09%
last_static_handle 2 0.00%
sc_ccc_cfg 32 0.04%
subscriptions 8 0.01%
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Introduce new API function for ieee802154 driver configuration.
Currently this function is used for ACK configuration.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The PR removes the exclusive limit on enabling both UART_ASYNC_API
and UART_INTERRUPT_DRIVEN so that both options can be enabled
together for same uart driver.
Also, the interrupt handler will be used for both cases. So, enable
definition of interrupt handler for both.
However, nRF UART driver still wants to enable only one of them.
So, a new config is added to disable the code for UART_ASYNC_API
when the option UART_INTERRUPT_DRIVEN is enabled.
Signed-off-by: Jun Li <jun.r.li@intel.com>
k_poll_signal_raise() returns an error code to indicate that the raise
was too late to notify an expiring poll. Make clear that this does not
mean that the signal was lost: a subsequent poll will find it and expire
immediately.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Extended the UTIL_DEC_N definitions to handle the UTIL_REPEAT macro with
up to 256 repetitions.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Changed type of the paramater that determines the number of elements in
the stats group. Now it is possible to declared more than 256 elements.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
A new function pcie_irq_enable() is added to be used in lieu of
irq_enable() when the target device is PCI(e)-attached. The function
attempts to use MSI, when configured in the kernel and supported by
the endpoint; failing that, it will verify that IRQ requested is in
fact routed to the device by the boot firmware before enabling it.
The NS16550 UART driver is updated to use pcie_irq_enable().
The PCI(e) shell is extended to dump information about wired IRQs.
The up_squared devicetree is fixed (reverted?) to IRQ5 for UART1.
The galileo enables MSI by default.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The size of the ROM region is now rounded up to the
nearest power of two; we no longer assume that RAM
is in a different part of memory.
Fixes: #15558
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Added macros which can be used to create a command which depends
on compilation flag. Macros are a cleaner alternative to #ifdefs
around command registration and command handler.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Patch adds option for progressive erase of firmware image.
When using this, flash is erased as necessary when receiving
new firmware, instead of erasing the whole image slot at once.
This is useful on some hardware (like nRF52840) that has
long erase times, to prevent long wait times at the beginning
of the DFU process.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
There was a stray close group comment @} that was causing a large chunk
of the watchdoc API documentation to be missing.
Fixes: #15678
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Major changes are:
- Expose settings backend API to enable custom backend support.
- Add a new CONFIG_SETTINGS_CUSTOM backend to allow registering a custom
backend.
- Change api of the handlers h_set() routines to allow for
backend-specific read callbacks.
- Provide a customizable settings_backend_init() routine for custom
backends.
- Move runtime settings support to be its own backend.
Signed-off-by: François Delawarde <fnde@oticon.com>
This is mainly testing purpose from native_posize ethernet
driver. Enable CONFIG_ETH_NATIVE_POSIX_VLAN_TAG_STRIP to have
VLAN tag strip feature on ethernet Rx frames.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Some ethenet controllers want to strip the VLAN tag from
ethernet Rx frames and feed the packet into proper interface
queue based on the tag. Add this flag to get_capabilities()
to provide VLAN tag stripping feature to the controller.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This patch adds support for Read Using Characteristic UUID which is one
of the procedure to read the characteristic value especially when the
client only knows the characteristic UUID and does not know the handle
of the characteristic.
Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com>
Existing sntp_request() function has a coarse integer seconds
precision, discarding fractional part as returned by SNTP.
Deprecate it, and instead introduce sntp_query() function which
returns both integer and fractional seconds as a newly introduced
structure sntp_tstamp.
Fixes: #15596
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Previously, a case when poll() call timed out wasn't handled, and
recv() was called unconditionally. In the case of timeout, recv()
itself would hang indefinitely.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
If the NET_IF_NO_AUTO_START network interface flag is set, then
do not take network interface up during the initialization of the
network interface. The network device driver can set the flag in its
network interface initialization function if needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Provide access functions for manipulating network interface flags.
There is no need for the caller of this API to know about the inner
details of the flags.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
None of the UART drivers actually reference the PCI data members
declared in this header, so they are removed.
Signed-off-by: Charles Youse <charles.youse@intel.com>
Added bBreak, bRingSignal, bFraming, bParity and bOverRun
handling in cdc_acm_line_ctrl_set.
Reference: Chapter 6.5.4 of Universal Serial Bus Communications Class
Subclass Specification for PSTN Devices rev 1.2
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
In order to generalize the currently specialized nRF51 IC setup hook,
make the following changes:
- Generalize the hook to bt_ic_setup()
- Use a weak NOP version by default
- Move the currently existing one to the board folder
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The code (net_buf_simple_init in particular) expects the data buffer
to immediately follow the net_buf_simple struct, so it's wrong to
request any specific alignment for this buffer. In practice this
doesn't make any difference since the net_buf_simple struct itself is
4-bytes aligned and a multiple of 4 bytes, however the extra
__net_buf_align makes it look like its location in memory doesn't need
to immediately follow the net_buf_simple struct.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Added option to have LFCLK synthesized from HFCLK. It is not low
power but ensures constant relation between HFCLK and LFCLK and
might be useful in certain scenarios (e.g. testing).
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Update read and write callback documentation regarding local access of
the attribute contents.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces shell_hexdump API which can be used to print an array
such as a network buffer.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The struct _caller_saved is not used. Most architectures put
automatically the registers onto stack, in others architectures the
exception code does it.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
A parallel PCI implementation ("pcie") is added with features for PCIe.
In particular, message-signaled interrupts (MSI) are supported, which
are essential to the use of any non-trivial PCIe device.
The NS16550 UART driver is modified to use pcie.
pcie is a complete replacement for the old PCI support ("pci"). It is
smaller, by an order of magnitude, and cleaner. Both pci and pcie can
(and do) coexist in the same builds, but the intent is to rework any
existing drivers that depend on pci and ultimately remove pci entirely.
This patch is large, but things in mirror are smaller than they appear.
Most of the modified files are configuration-related, and are changed
only slightly to accommodate the modified UART driver.
Deficiencies:
64-bit support is minimal. The code works fine with 64-bit capable
devices, but will not cooperate with MMIO regions (or MSI targets) that
have high bits set. This is not needed on any current boards, and is
unlikely to be needed in the future. Only superficial changes would
be required if we change our minds.
The method specifying PCI endpoints in devicetree is somewhat kludgey.
The "right" way would be to hang PCI devices off a topological tree;
while this would be more aesthetically pleasing, I don't think it's
worth the effort, given our non-standard use of devicetree.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Right now only numerical values are printed which must
be looked up in the Designware ARCv2 ISA Programmer's
Reference, which is not public.
Add a non-default Kconfig to print more information at
the expense of footprint, and enable it for all the simulator
targets.
We only print code/parameter details for machine check and
protection violations, more may be added later as desired.
This should cover all the exceptions we commonly encounter
for memory protection.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
If promiscuous mode support is disabled in Kconfig and promiscuous.h is
included the build will fail. The returned errno should be ENOTSUP.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
.object_access.* sections should be with
GROUP_LINK_IN(ROMABLE_REGION) as other sections in
common-rom.ld
Fixes#15481
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The macros that generate the handler and implementation functions
changed the generated names. Fix the comments to match.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
The commit 8d0ef1eb85 attempted to fix
test case MESH/SR/HM/CFS/BV-02-C, however inadvertently ended up
introducing a hidden bug. This bug was unearthed thanks to commit
686f5c79cf. We have to keep always track
of the FastPeriodDivisor state whether we're using it (faults > 0) or
not (faults == 0). Introduce a boolean field to the model publication
that's used to indicate whether the FastPeriodDivisor should be
applied or not, instead of zeroing the divisor when there are no
faults (this would cause wrong behavior when faults appear again).
Additionally, the PTS seems to require that we wait until the end of
the existing period before sending the next Health Current Status,
rather than sending it immediately when the fault count changes.
Fixes#15365
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Implement the Controller counterpart to CONFIG_BT_WAIT_NOP so that it
issues a NOP Command Complete event after booting up, to signal to the
Host that it is ready to receive HCI traffic.
Fixes#15333
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
* fix the stack allocation and initialization
for mpu stack guard when USERSPACE is not configured
* fixes#15163
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
