Implement SDHC driver for NXP USDHC peripheral, supporting all api calls
available in the sdhc driver. This implementation leverages NXP's HAL,
and simply implements a shim layer over the HAL itself.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Practically all changes in the last 2 years in this folder
are in actual tests, and not in infrastructure.
There is no need for me to be added as reviewer to them,
specially as all involved know how to ping me if needed.
=> Remove myself from the CODEOWNERS list for
tests/bluetooth/bsim_bt/
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Move include paths and add new target_include_directories to support
backwards compatibility:
* /include -> /include/zephyr
example: <irq.h> -> <zephyr/irq.h>
Issue #41543
Signed-off-by: Yuval Peress <peress@google.com>
Move the kernel documentation up and make it a main chapter. Right now
it is hidden very low in the structure under references.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add myself to the CODEOWNERS for samples/subsys/logging/syst
to make checkpatch happy, and to get notifications of changes
in the sample.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Until now the whole USB device stack code is located
in the top subsys/usb directory. Move it to own directory
in preparation for upcoming extension and rework of USB support.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add a dummy driver for the `vnd,pwm` compatible to allow compilation of
drivers utilising PWM when running "build_all" tests.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Adds an entropy driver that uses Bluetooth HCI commands as its source
of randomness. As this method is blocking, the ISR API is not supported.
As this method will range from relatively slow (same core Bluetooth HCI
controller) to extremely slow (UART HCI Bluetooth controller), use the
xoshiro PRNG by default for RNG generation.
Implements #37186
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Aspeed ast10x0 series SoCs contain a ARM Cortex-M4F processor. This
processor operates at 200MHz and executes on SRAM.
This patch adds support for ast1030 as the first SoC of this series
which is targeted but not limited at the bridge IC in a server system.
Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Change-Id: I668af1ff8a36a05da791c3329ae08f5ae712bdd4
As mentioned in #42882, the I2C of IT8XXX2 is designed for two different
IP blocks, so this PR divides this I2C driver into two compatibles.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
This contains accessor macros for getting the maximum bitrate supported
by a CAN controller/transceiver combination.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This commit adds a USB Type-C Port Controller Driver for
the STM32 USB Type-C / USB Power Delivery (UCPD) peripheral
Signed-off-by: Sam Hurst <sbh1187@gmail.com>
The commit adds guide that describes format of SMP reqests/responses
as issued by Zephyr implementation within mcumgr.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
New driver needs owners (hijack the earlier cAVS wildcard for the
intra-DSP, it's now a legacy thing and essentially unrelated, but is
for the same platform).
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Intel's adsp needs to set, at a minimum, a clocking bit before the driver
can initialize the designware dma controller. In many ways it is the
designware dmac IP but with additional registers and functionality added
on top of it. So the code structure here follows how the hardware
appears to be designed, layered on top of the designware driver.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
As part of #40167 is was discovered that devicetree headers are always
generated when CMake re-runs.
This causes all source files that directly or indirectly through
included headers to recompile when CMake re-runs, even if there are no
changes to devicetree.
This commits introduces `zephyr_file_copy(...)` similar to
`file(COPY_FILE ...)` from CMake 3.21.
However, as CMake 3.20 is supported by Zephyr we need a zephyr variant
of this function to allow usage with CMake 3.20.
This ensures that only when there are changes to devicetree headers,
then source files will recompile.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Add Bluetooth controller tests directory and set it to Bluetooth
controller maintainer (cvinayak) and the Bluethooth controller LLCP
refactoring team.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Added basic support for the RP2040 SoC. Support
includes booting and starting the kernel, on one
core only.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds the `gen_image_info.py` script which supports creation
of a header file with image information from the EFL file.
This version populates the header file with:
- Number of segments in the image
- LMA address of each segment
- VMA address of each segment
- Size of each segment
The header file can be used by a secondary build system which needs this
information.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The MIPS Malta is an ATX form factor evaluation board made by MIPS
Technologies. Malta board is the most popular platform for MIPS
full-system emulation.
See https://www.linux-mips.org/wiki/MIPS_Malta for details.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
The MIPS Malta is an ATX form factor evaluation board made by MIPS
Technologies. Malta board is the most popular platform for MIPS
full-system emulation.
See https://www.linux-mips.org/wiki/MIPS_Malta for details.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Remy Luisant <remy@luisant.ca>
