This commit adds a test for veryfing new functionality of storing
mutliple interfaces per single multicast routing entry.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
Adds a DAC driver for Texas Instruments DACx0501 family of devices
Signed-off-by: Eran Gal <erang@google.com>
Co-authored-by: Martin Jäger <17674105+martinjaeger@users.noreply.github.com>
This sets up a backing device, creates a FAT file system, then opens a file
as a loopback device and runs the disk_access tests on that.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
So far test cases in TCP test suite were represented by magic numbers.
With the increasing size of this test suite, it started to become
troublesome to follow, which number represents which test case or what
number can a new test case get.
Introduce a new enum for the test suite, which can be used to represent
individual test case. It simplifies adding new test cases (test case ids
are now defined in a single place, so easier to extend), and also
improves code readability.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Verify, that when TCP stack received FIN packet containing data bytes,
the data is provided to the application and respective seq/ack counters
are updated respectively.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add a test to protect against future regressions in the ioctl F_SETFL
operation of eventfd. Flags are set and unset and validity of the file
descriptor is checked by reading and writing.
Signed-off-by: Celina Sophie Kalus <hello@celinakalus.de>
Allow changing the CoAP Block-wise transfers block-size
for subsequent GET requests.
It looks like Leshan switches block size back to its
configured value, if it is smaller.
So even when we send block N=0 with size of 512, Leshan
seem to handle that properly but still asks N=2 with
block size 256(if that is configured).
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Fix regression in BT_RX_STACK_SIZE use due to
commit b91728619c ("Bluetooth: host: remove
`CONFIG_BT_RECV_BLOCKING`").
Profiling of Controller Rx thread has been mentioned in
commit 586ba9fd13 ("Bluetooth: Controller: Increase
BT_RX_STACK_SIZE for BT_HCI_RAW enabled").
Also, move the TX_STACK_SIZE value as default in Kconfig
from the explicit value being set in hci_ipc sample.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The network interface parameter for net_eth_get_vlan_tag() should
be the VLAN interface so use the search loop properly.
Earlier the main interface could be checked.
Add also test cases for this so that we can catch that the func
works properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add nRF54L15 to platform_allow in the sample.yaml:
- clock_control_api,
- nrf_clock_calibration,
- nrf_lf_clock_start,
- onoff.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Generic node_rx_hdr struct contains data not used for done event, so this
pdu specific data is moved to node_rx_pdu to minimize memory usage for
MFIFO_done alloc.
This however calls for a considerable write-through replacing the generic
node_rx_hdr with node_rx_pdu when relevant and needed.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Since the minimum/maximum supported bitrates are now stored in the common
CAN controller driver configuration struct, retrieving these can no longer
fail.
Add new CAN controller API functions can_get_bitrate_min() and
can_get_bitrate_max() reflecting this and deprecate the existing
can_get_min_bitrate() and can_get_max_bitrate().
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Previously the logic was inverted for error_callback_en where 0 was
enablement and 1 was disable. This was likely done so that the default,
sensibly so, was to enable the error callback if possible. A variety of
in tree users had confused the enable/disable value.
Change the name of the flag to error_callback_dis where the default
remains 0 (do not disable the callback!) and correct in tree uses of the
flag where it seemed incorrect.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
LLEXT on Xtensa now supports both shared and relocatable (partially
linked) extensions. This commit adds a copy of the LLEXT test for the
relocatable case.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
If central initiates incompatible procedure after having replied (with
_IND), peripheral fails to disconnect as spec'ed.
Fix by correctly setting the INCOMPAT flag to reserved on IND receipt to
enforce the disconnect.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
It's needless complexity, and the terminology clashes with
Bluetooth (HCI frags).
It has one user, IPSP, that is going away soon.
Removing frag support will allow a future optimization, removing the
need for HCI and L2CAP fragment buffer pools, saving memory.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Add test which is using one SPI master and one SPI slave instance.
There is already a loopback test for SPI master so this test is
focusing on SPI slave API. Test requires 4 pairs of GPIO pins
shortened together. One set of pins is used by SPI master and
one for SPI slave.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Remove IPSP support from the tree.
It has no maintainers, and is regularly broken. The fact that it's
nontrivial to set-up in linux makes it hard to fix reported issues.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
First sector starts at CONFIG_EXT2_DISK_STARTING_SECTOR.
This commit fixes calculating free space, based on that value.
Signed-off-by: Franciszek Pindel <fpindel@antmicro.com>
This extends the test for memory mapped stack, as the address of
memory mapped stack object would be different than the actual
stack object.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This extends the test for memory mapped stack, as the address of
memory mapped stack object would be different than the actual
stack object.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This test is intended to teach the conventions and best practices to a
potential contributor that wants to add a test, for say a new feature.
It is liberally commented on purpose, so new contributors don't have to
spend two weeks understanding the intricacies of the simulator, the bsim
test framework, the native builds, backchannels, etc..
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This code can be found (kinda) duplicated all over
`tests/bsim/bluetooth`.
Put it in a common place.
Refactoring the current tests will be done in a future commit.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Improve function which guesses the test name so the calling
script can be invoked from any folder, not just Zephyr's
base.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fixes some missed renames for overlays with the recent change
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The commit adds dependency on Kconfig FLASH_PAGE_LAYOUT to subsystems
that really require it:
FCB, NVS, LittleFS
and removes direct selection from '*.conf' files where no longer
needed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Adjustments of overlay and conf files to adjust for the MERGE removal.
The revert of MERGE requires specific overlay and conf files for boards
which relied on the MERGE feature.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This API is not widely used and it is actually broken since device
runtime power management is not checking it when suspending and
resuming.
On top of that, this API is very close to pm_device_busy* API,
close enough to consolidate in only one API.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
EATT is not properly used by LE audio nor is the
Zephyr implementation very good, so disable for now
or at least until the BSIM tests are passing with it
enabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add an instance of the output diagnostics sensor for the
power train switch TLE9104 to the build all tests.
Signed-off-by: Benedikt Schmidt <benedikt.schmidt@embedded-solutions.at>
