Add options about Internal RC(IRC) oscillator.
- GD32_HAS_IRC_32K/40K indicates IRC types.
- GD32_LOW_SPEED_IRC_FREQUENCY is the numeric value of frequency
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Add option to enable the SFN model when building TF-M.
The SFN model will eventually replace the Library model.
Change the default model to be IPC, which follows the default
configuration of TF-M.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Update the source files compiled when `CONFIG_LORAMAC_REGION_CN470` is
enabled to link. Despite the naming, a `RegionBaseUS.c` function
(`RegionBaseUSVerifyFrequencyGroup`) is used by all four of the CN470
band implementations.
Validated by compiling `samples/subsys/lorawan/class_a` with
`CONFIG_LORAMAC_REGION_CN470` instead of `CONFIG_LORAMAC_REGION_IN865`.
Fixes#49960.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Up until now, the Zephyr CAN controller drivers set a default bitrate (or
timing) specified via devicetree and start the CAN controller in their
respective driver initialization functions.
This is fine for CAN nodes using only one fixed bitrate, but if the bitrate
is set by the user (e.g. via a DIP-switch or other HMI which is very
common), the CAN driver will still initialise with the default
bitrate/timing at boot and use this until the application has determined
the requested bitrate/timing and set it using
can_set_bitrate()/can_set_timing().
During this period, the CAN node will potentially destroy valid CAN frames
on the CAN bus (which is using the soon-to-be-set-by-the-application
bitrate) by sending error frames. This causes interruptions to the ongoing
CAN bus traffic when a Zephyr-based CAN node connected to the bus is
(re-)booted.
Instead, require all configuration (setting bitrate, timing, or mode) to
take place when the CAN controller is stopped. This maps nicely to entering
"reset mode" (called "configuration mode" or "freeze mode" for some CAN
controller implementations) when stopping and exiting this mode when
starting the CAN controller.
Fixes: #45304
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
This commit prioritizes usec timer over msec. Doing so improves
CSL by helping scheduling timeslots on IEEE 802.15.4 with lower miss
rate.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
1. Move the defines from usb_dc_mcux.h to usb_device_config.h
and fsl_os_abstraction.h. These headers are used by
the SDK USB driver. usb_dc_mcux.h header file is not longer
needed and hence deleted.
2. Delete the Zephyr implementation of the usb_device_struct
driver and use the one implemented inside the SDK USB
driver. This requires updating the references to
usb_device_struct inside the USB driver
3. Move defines and structures used by the driver
out of the header file that is included by the SDK and
into the MCUX USB driver.
4. Use end point defines provided by Zephyr instead of adding
them locally.
5. Add a Kconfig to set the thread stack size
6. Move code to enable interrupts back to usb_attach function.
Interrupts should be enabled after the init is successful,
else we see errors of the ISR getting called before the
init is complete causing Faults
6. Update west.yml to update the NXP HAL to get the updated
SDK USB driver.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
The commit switches flash area access from FLASH_AREA_ macros
to FIXED_PARTITION_ macros and to usage of DTS node labels,
to identify partitions, instead of label property.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
LittleFS has some macros resolving to the Zephyr LOG_* ones, use
the ##__VA_ARGS__ for these so that they don't leave a trailing comma if
called with a single argument.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Set OpenThread specific cmake options depending on the selected
device type.
This reduces the number of libraries to build.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
If enabled the optimization is done at the expense of power consumption
on SED/SSED devices.
Signed-off-by: Lukasz Maciejonczyk <lukasz.maciejonczyk@nordicsemi.no>
In order to ensure that builds properly reflect the use of binary blobs,
it is important to markt the build as tainted. For that purpose
introduce two new Kconfig options that ultimately will be reflected in
the build image itself.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The old project, liblc3codec, is not used anymore. Rename the Zephyr
module name, folders, and Kconfig options based on the new name, liblc3.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Many device pointers are initialized at compile and never changed. This
means that the device pointer can be constified (immutable).
Automated using:
```
perl -i -pe 's/const struct device \*(?!const)(.*)= DEVICE/const struct
device *const $1= DEVICE/g' **/*.c
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
It is frequent to find variable definitions like this:
```c
static const struct device *dev = DEVICE_DT_GET(...)
```
That is, module level variables that are statically initialized with a
device reference. Such value is, in most cases, never changed meaning
the variable can also be declared as const (immutable). This patch
constifies all such cases.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Rename the can_state enumerations to contain the word STATE to make their
meaning more clear:
- CAN_ERROR_ACTIVE => CAN_STATE_ERROR_ACTIVE
- CAN_ERROR_WARNING => CAN_STATE_ERROR_WARNING
- CAN_ERROR_PASSIVE => CAN_STATE_ERROR_PASSIVE
- CAN_BUS_OFF => CAN_STATE_BUS_OFF
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Change sourcing of generated Kconfig.module to be optional.
It should be possible to run parse the Zephyr Kconfig tree even if the
Kconfig.modules file has not been generated.
This can be useful in testing where you may wish to run without Zephyr
modules present, and thus not load the Zephyr module CMake module.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Remove the "z" prefix from the public CAN controller API types as this
makes them appear as internal APIs.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Debug log messages generated by mbedTLS library contain newline at the end
of log string. Remove this newline, if it exists, so that log output is
much more user friendly.
Add a dedicated Kconfig option for that, so it can be disabled on request.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
So far LOG_DBG() was used inside debug hook for mbedTLS library. This meant
that it was hard to distinct log messages by simply looking at the log
level number, even though Zephyr logging subsystem supports colorful logs
depending on log level.
Choose an appropriate Zephyr LOG_*() macro based on log level coming from
mbedTLS library. Remove log level number from formatted log messages, as it
is now redundant.
One controversial thing about this change is that mbedTLS' "2 State change"
log level is mapped to Zephyr's "warning" log level. Those are not really
warnings in real life, but rather informational messages. However, using
"warning" log level for those allows to clearly distinguish between "2
State change" and "3 Informational" debug messages from mbedTLS.
Additionally, mbedTLS debug message implementation does not seem to be safe
to use in production, so keeping in mind MBEDTLS_DEBUG will be enabled just
during debugging phase, printing "2 State change" logs as warnings should
not be a big deal.
Set default MBEDTLS_DEBUG_LEVEL value depending on selected Zephyr logging
module level, so that only single option needs to be configured in
application project.
Remove prompt for MBEDTLS_DEBUG_LEVEL, so that interactively (e.g. via
menuconfig) adjusting MBEDTLS_LOG_LEVEL will always result in automatically
updating MBEDTLS_DEBUG_LEVEL option. This is to prevent so called "stuck
symbol syndrome".
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
So far there was a runtime basename extraction of filenames passed to
mbedTLS debug hook. This has both runtime penalty as well as code size
penalty.
Introduce a buildtime support of extracting basename of source filenames
logged using logging subsystem, so that there is no need to do it at
runtime.
Provide Kconfig options for both buildtime and runtime basename extraction,
as in some cases the buildtime basename extraction might not work,
depending on toolchain used for building Zephyr. Default to buildtime when
using Zephyr SDK, as that is proven to work. Use runtime basename
extraction in other cases (other toolchains used).
This saves approximately 204 bytes of code footprint for sample
application with native TLS sockets built for nRF52840.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
mbedTLS library threshold initialization was done in native TLS socket
implementation (which tends to use mbedTLS now) and inside mbedTLS
benchmark test. Move that to mbedTLS module initialization, as this is a
global setting.
Update description of CONFIG_MBEDTLS_DEBUG_LEVEL to clarify when
mbedtls_debug_set_threshold() is called.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
So far there was a debug log hook installed in TLS socket implementation.
However, mbedTLS (with debug enabled) might be used outside from TLS socket
and even outside from networking context.
Add new module, which implements debug log hook and makes it available
whenever CONFIG_MBEDTLS_DEBUG is enabled.
Note that debug hook needs to be installed for each mbedTLS context
separately, which means that this requires action from mbedTLS users, such
as TLS sockets implementation.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Remove modules/hal_nordic/Kconfig.dt as we now autogenerate the
contents of this file based on the dts bindings in tree.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add module specific compiler flags to suppress reporting unused
variables and unused functions in mbedtls building.
Signed-off-by: Eugene Cohen <quic_egmc@quicinc.com>
Signed-off-by: Dave Aldridge <quic_daldridg@quicinc.com>
Update lvgl for devicetree updates to use zephyr,keyboard-scan.
Remove Kconfig symbol (LV_Z_POINTER_KSCAN_DEV_NAME) that don't exist
anymore since these values are coming from devicetree.
Signed-off-by: Kumar Gala <galak@kernel.org>
Introduce uoscore-uedhoc repository, providing OSCORE and EDHOC
libraries as a new Zephyr module.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Instead of relying on selected ciphesuite to enable mbed TLS EC configs,
add separate config entries to enable them. This allows to use EC
functionality w/o TLS/DTLS enabled.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
psa_crypto_cipher.c includes an internal header with <>, causing
complication errors in Zephyr (header not found).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The CMP, TMU and SHRTIMER modules were not compiled. Add them now that
GD32E50X series support is being added (this SoC has such units).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Add some compile definitions necessary for the gd32e50x HAL and select
default crystal clock.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Add `OPENTHREAD_CONFIG_MESSAGE_BUFFER_SIZE` to Kconfig.
Also set the number of children to minumum possible for MTD builds
in order to save some resources (~512B of RAM).
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Use chosen ieee802154 device from DT since
CONFIG_NET_CONFIG_IEEE802154_DEV_NAME is being phased out.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Exclude the non-secure TF-M application from being built by TF-M.
This also stops the building of the tfm_ns_api library that we were
linking against.
This library is defined by the tf-m regression tests.
Add the installed interface source files exported by the TF-M build
system compile them in the zephyr build system.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The OpenThread module should not explicitly link with libc in case of
minimal libc or picolibc.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
LV_Z_DISPLAY_DEV_NAME, LV_Z_HOR_RES_MAX, & LV_Z_VER_RES_MAX
Kconfig symbols don't exist anymore. They got removed in
recent devicetree update of lvgl module. So remove them from
modules/Kconfig.lvgl.
Signed-off-by: Kumar Gala <galak@kernel.org>
Add missing `LV_Z_HOR_RES_MAX`, `LV_Z_VER_RES_MAX`
and `LV_Z_DISPLAY_DEV_NAME`
Kconfig symbols to fix the following Kconfig warnings:
warning: LV_Z_DISPLAY_DEV_NAME defined without a type
warning: LV_Z_HOR_RES_MAX defined without a type
warning: LV_Z_VER_RES_MAX defined without a type
Fixes
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
