This change allows writing to the flash while running in XIP mode,
and enables mcuboot or NVS settings to be used on i.MX RT socs.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
- added an option to use GPIO to enable USB DFU.
Patch required as wait_for_usb_dfu() function started to
take time argument since was #30015 merged.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added net-capture.py script to net-tools project. The script
can be used to view and save the captured network traffic to
pcap file.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
STM32Cube updates:
stm32cube: update stm32l5 to version V1.4.0
stm32cube: update stm32l4 to version V1.17.0
stm32cube: update stm32g4 to version V1.4.0
stm32cube: update stm32f7 to version V1.16.1
stm32cube: update stm32f4 to version V1.26.0
stm32cube: update stm32g0 to version V1.4.1
stm32cube: update stm32h7 to version V1.9.1
stm32cube: update stm32mp1 to version V1.4.0
update stm32cube/common_ll
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add the nanopb library and generator tools as a module.
Nanopb is a small code-size Protocol Buffers implementation in ansi C.
It is especially suitable for use in microcontrollers,
but fits any memory restricted system.
Nanopb home: https://jpa.kapsi.fi/nanopb/
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Initially the flexspi device only supported a flash driver for
external NOR flash. As the controller supports HyperBus devices,
which can be either volatile or non-volatile, the driver iss moved
to drivers/memc.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Update revision of hal_nordic which introduces new radio driver
integration scheme.
The glue cmake has been updated to use the new integration scheme
for the nrf-802154 component.
Added config option to exclude radio driver in hal_nordic from the
build process. This allows the radio driver to be supplied from
other sources.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This can be used to implement tunneling, VPN etc. The virtual
interfaces can be chained together to support multilayer
network interfaces.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The new revision fixes an issue with channel deallocation
in nrfx_gpiote initialization.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Update west.yml to point to hal_silabs version with support for Silicon
Labs EFR32FG13P SoCs.
Signed-off-by: Yonatan Schachter <yonatan.schachter@gmail.com>
F0: from version v1.11.1 to version v1.11.2
F1: from version v1.8.2 to version v1.8.3
F2: from version v1.9.1 to version v1.9.2
F3: from version v1.11.1 to version v1.11.2
F4: from version v1.25.1 to version v1.25.2
L0: from version v1.11.3 to version v1.12.0
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Commits affecting Zephyr that are included with the new revision:
99f9fd6 img_mgmt: Use IMG_MGMT_BOOT_CURR_SLOT as current running
slot ID (enhancement)
6f52fd9 zephyr: fix initialization of file struct (bug fix)
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Mcuboot was updated to the version synchronized with
the upstream 5b7ed6a which introduces:
- Added LED support for signaling enter to the serial recovery mode
- Added boot delay/debonuce of serial detect pin.
- Fixed compilation warnings with ZEPHYR_LOG_MODE_MINIMAL
- Added optional check which prevents attempting to boot image that
has been build for different ROM address than a slot it currently
resides in. Check is enabled if image was signed with
IMAGE_F_ROM_FIXED flag.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
This commit moves all hal_nordic radio driver code that is
strictly dependent on Zephyr into the Zephyr repository.
Signed-off-by: Rafał Kuźnia <rafal.kuznia@nordicsemi.no>
There is a hardcoded macro in Winc1500 HAL SPI driver
that would prevent the driver from working.
This macro is now defined only based on KConfig entry.
This KConfig entry is by default not set.
To enable, set "CONFIG_WINC1500_DRV_USE_OLD_SW=y"
in proj.conf or board.conf
Signed-off-by: Raja D. Singh <rdsingh@iotwizards.com>
Commits affecting Zephyr that are included with the new revision:
fb489e1f mgmt: Add support for un-registering a group along with
the same support in img_mgmt
c8151d80 zephyr: Rely on img_mgmt_find_best_area_id to select update
partition
b92aa0b8 Fix encoding usage for halffloat
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Adds hal dependencies necessary to introduces STM32G050xx, STM32G051xx,
STM32G061xx, STM32G0C1xx, STM32G0B1xx, and STM32G0B0xx devices.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
* Added implementations of otPlatCAlloc and otPlatFree methods
necessary for the OpenThread in case of using EXTERNAL_HEAP.
* Added CONFIG_OPENTHREAD_DNSSD_SERVER option to allow enabling
OT_DNSS_SERVER feature.
Signed-off-by: Kamil Kasperczyk <kamil.kasperczyk@nordicsemi.no>
This commit moves TFM CMakeLists.txt into Zephyr and relocates the
Kconfig.tfm file under the modules/tfm folder.
Updates the manifest to point to related TFM changes.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit brings in several latest bugfixes for the hal_nordic repo.
It also removes a Kconfig entry that these changes yield deprecated.
Signed-off-by: Jedrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Mark the PPI/DPPI channels and groups used by the 802.15.4 driver
as occupied and thus unavailable for allocation through nrfx_ppi.
Signed-off-by: Adam Zelik <adam.zelik@nordicsemi.no>
MCUBoot was updated to version with bugfix for issue
which caused that it can not be built if image encryption
was enabled.
fixes#32002
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Update EDTT version to include increased Connection
Parameter Request Procedure test timeout calculations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
MCUboot version with bugfix for following issue:
CONFIG_LOG_MINIMAL was replaced by
CONFIG_LOG_MODE_MINIMAL by
zephyrproject-rtos/zephyr#31404 which
broke MCUboot default build.
fixes#31640
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Update manifest with OpenThread up to commit
'f7825b96'.
It also includes commit fixing Coprocessor
Vendor Hooks Kconfig usage in CMake.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
