This patch removes the redundant test case step.
Neither VCS/VCP nor MICS/MICP require ATT MTU to be other than default
23 bytes.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This enables automatic MTU exchange for services that require MTU size
bigger than default ATT MTU to operate.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Move the `pm_device_runtime_init_*` functions from <pm/device_runtime.h>
to <pm/device.h>. The initial device state should be settable
independently of whether `CONFIG_PM_DEVICE_RUNTIME` is enabled.
This also resolves a compilation error when attempting to use these
functions without also including <pm/device.h>.
Function documentation is also updated to be more general than only
referencing runtime PM, as this also applies to system PM and manually
run actions.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
This update Atmel sam serial drivers to use pinctrl driver and API. It
updates all boards with new pinctrl groups format.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Added the stop_bits_client parameter to the modbus_serial_param struct.
Being able to configure the number of stop bits for the client
independently from the parity setting, allows to support connecting to
modbus server that do not follow the MODBUS over Serial Line Specification
and Implementation Guide.
Signed-off-by: Constantin Krischke <constantin.krischke@lemonbeat.com>
Signed-off-by: Jan Geldmacher <jan.geldmacher@lemonbeat.com>
- strtoll() and strtoull() are copies of strtol() and strtoul() with
types changed to long long instead of long.
- added tests
- added documentation
- removed stubs from civetweb sample
Signed-off-by: Gerhard Jörges <joerges@metratec.com>
It can be useful to know what a node's index is in its parent's list
of children. This information is now available to C via
gen_defines.py, but no user-facing macros are available to access it.
Add a macro which exposes this information to users via devicetree.h.
Some APIs want to build on devicetree.h by creating some derived
structure for each of a node's children. It can therefore be
convenient to use each child's index in the list of children as an
identifier for the child.
Some concrete and common examples are "gpio-keys" and "gpio-leds",
which allow you to define arbitrary numbers of keys and LEDs as child
nodes of nodes with those compatibles. Derived APIs can use a key or
LED node's index in its list of parents as a way to identify which of
several structures is relevant to a particular controlled key or LED.
These are just examples, though -- the feature added here makes no
assumptions about where it's being used.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
autopts was updated to properly require support for Accept Filter List
in Auto Connection Establishment Procedure related tests. This patch
enabled support for it and adds required BTP support.
This was affecting following qualification test cases:
GAP/CONN/ACEP/BV-03-C
GAP/CONN/ACEP/BV-04-C
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Make the test data larger to help slow down the transfer long enough
to get suspend to work. Then attempt to spin on suspend. Suspending any
of the test transfers is a success.
Previous suspend resume test would always fail on DesignWare DMA
as it was seemingly already done by the time dma_suspend would be
called in the ISR.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
There was mistake in parentheses application in
the expression which calculates the value.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Fix errors like:
inlined from ‘test_mbedtls’ at
zephyrproject/zephyr/tests/crypto/mbedtls/src/mbedtls.c:172:6:
zephyrproject/zephyr/tests/crypto/mbedtls/src/mbedtls.c:96:17: error:
‘test_snprintf’ reading 10 bytes from a region of size 1
[-Werror=stringop-overread]
96 | test_snprintf(1, "", -1) != 0 ||
| ^~~~~~~~~~~~~~~~~~~~~~~~
In GCC >= 11 because `ret_buf` in some calls are shorter literals
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The `size` property is expressed in `bits` unit.
The value should be calculated as bits to bytes conversion.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Added overlay with DTS of MX25L51245G qspi flash
memory. DTS configures qspi clock to 2 MHz which is supported
by nRF52840.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
target is stm32fxx with clearing clock config
target is stm32fxx with pll from hsi clock config
target is stm32fxx with pll from hse clock config (with bypass)
target is stm32fxx with hse, hsi, clock config (no pll)
Signed-off-by: Francois Ramu <francois.ramu@st.com>
target is stm32l4x/l5x with clearing clock config
target is stm32l4x/l5x with pll 64MHz from hsi clock config
target is stm32l4x/l5x with pll 48MHz from msi clock config
target is stm32l4x/l5x with pll 64MHz from hse clock config (with bypass)
target is stm32l4x/l5x with hse, hsi, msi clock config (no pll)
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Testing the HSE on the nucleo_stm32g071rb requires a hw fixture
on the hw board : MCO signal must given by the STLink to the mcu.
Put a hardware fixture to activate the hse clock with by-passed
only if the SB17 is closed on the HW.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
target is stm32wb55 with clearing clock config
target is stm32wb55 with pll 48MHz from hsi clock config
target is stm32wb55 with pll 48MHz from msi clock config
target is stm32wb55 with pll 64Hz from hse clock config
target is stm32wb55 with hse, msi, hsi clock config (no pll)
Signed-off-by: Francois Ramu <francois.ramu@st.com>
target is stm32wl55 with clearing clock config
target is stm32wl55 with pll 48MHz from hsi clock config
target is stm32wl55 with pll 48MHz from hse clock config
target is stm32wl55 with hse clock config (no pll)
target is stm32wl55 with msi clock config (no pll)
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Fix build error for stm32 devices which have no function
to get the PLL ON bit from the RCC_CR register
Use the register access instead.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
target is stm32l1/l0 with pll 32MHz from hsi clock config
target is stm32l1/l0 with pll 32MHz from hse clock config
target is stm32l1/l0 with hse clock config (no pll)
target is stm32l1/l0 with hsi clock config (no pll)
target is stm32l1/l0 with msi clock config (no pll)
Signed-off-by: Francois Ramu <francois.ramu@st.com>
target is stm32g4 with pll 64MHz from hsi clock config
target is stm32g4 with pll 64MHz from hse clock config
target is stm32g4 with hsi clock config (no pll)
Signed-off-by: Francois Ramu <francois.ramu@st.com>
target is stm32g0 with pll 64MHz from hsi clock config
target is stm32g0 with pll 64MHz from hse clock config
target is stm32g0 with hsi clock config (no pll)
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The ARRAY_SIZE macro uses sizeof and thus the return
type should be an unsigned value. size_t is typically
the type used for sizeof and fits well for the
ARRAY_SIZE macro as well.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add Kconfig file for the media proxy, for high-level media control
configuration.
The media proxy did not have a Kconfig file, it was relying on the
Kconfigs for GATT media control client and server.
The purpose is to unify the media control configurations, to make the
different media control functionalities available separately, and to
separate the high-level media control from the bluetooth media control
server and client.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Separate out the Kconfig for the media player.
Also removes some unused MCS configs.
The media player has been using MCS configs, while it should be the
other way around.
Also, this will make it easier to move the media player elsewhere, as
has been discussed.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
If a user has a 1GB external flash it is currently not possible
to configure this through DTS. To allow for such a configuration
we add an option which specifies the size in bytes not bits.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Import a selection of tests from the CMSIS-NN unit testing suite to
validate that the integration into Zephyr is working correctly.
Complete functional testing is left to the complete set of unit-tests
in the externally maintained code.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Updating test lists, commenting out test that fail with refactored LLCP
Introducing refactored LLCP specific test lists for GAP and GATT
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
This command is used to obtain 'Implementation eXtra Information for Test'
(IXIT) values that are required to proceed with BT qualification tests.
Signed-off-by: Tim Sørensen <tims@demant.com>
The filter in the testcase.yaml made it impossible for these to run.
Also, the Kconfig names for the options didn't really make much sense
so they were renamed to avoid conflict.
This fixes an issue found by #36433.
Signed-off-by: Yuval Peress <peress@google.com>
- Implemented ISO-AL TX interface functions for fragmentation of
unframed PDUs
- Implemented ISO-AL source construct and its creation for an input
data path
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
