Fixed masking defines for eSPI OOB RX and TX transfer
length registers. The transfer length fields are 13 bit.
The incorrect defines masked 14 bits.
Signed-off-by: Scott Worley <scott.worley@microchip.com>
Both ST and STM32 modules where using same HAS_STLIB Kconfig
symbol.
Now that each module is createing is own lib, we need to be able
to distinguish libs.
Depends on zephyrproject-rtos/hal_stm32/pull/52
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Move syst initialization code to zephyr tree and add
more useful fields (payload length and timestamp) in
SyS-T message packet.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Update mbedTLS commit along with the following fixes:
* Fix naming inconsistencies in some cipher modes, to match core mbedTLS
configs
* Add Kconfig to enable CTR cipher mode
Fixes#22421
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Update west.yml to point to hal_ti with the latest changes
from TI SimpleLink SDK 4.10.00.78 for CC13x2/CC26x2.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Update the TI HAL module so that it points to a revision that has been
ported to the new timeout API.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This is to update west.yml to point to hal_ti with the latest changes
from TI SimpleLink SDK 4.10.00.07 for CC32xx.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
As part of devicetree update to new devicetree.h We Need to convert
as use of DT_ARM_CORTEX_M4F_CLOCK_FREQUENCY to
DT_PROP(DT_PATH(cpus, cpu_0), clock_frequency) in the hal_ti for the
msp432p4xx SoCs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update STM32WB HCI lib support to version 1.5.0.
Additionally provide a doc section to clarify compatibility
with stm32wb wireless co-processor binaries.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Start SOCKS5 proxy in the net-tools Docker image and run MQTT TLS
tests with SOCKS enabled. Since the MQTT TLS server is already
running as of the previous test, start only the danted daemon.
Rely on mosquitto MQTT port being handled by the Docker image
configuration file instead of specifying it on the command line.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Updating west.yml to point a fix to include proper time.h header in
the HAL. This should fix an issue where clock_gettime() is not
correctly called due to recent change to make it into a system call.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
This commit updates `west.yml` to point to the `hal_atmel` commit that
fixes the incorrect GMAC priority queue register offsets for SAMV71.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Update manifest to a version of EDTT that supports receiving this
response in the unknown command response test (HCI/GEV/BV-01-C).
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
There was no way to use Openthread CoAP api in zephyr application so
far. These changes enable the feature. Now you can fully use CoAP
communication in an application working in Thread network.
Signed-off-by: Lukasz Maciejonczyk <Lukasz.Maciejonczyk@nordicsemi.no>
This commit updates the west.yml to point to the CMSIS module commit
that updates the CMSIS version to 5.7.0.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit updates the west.yml to point to the commit that adds the
CMSIS-Core(A) and defines the configurations to enable it, in
preparation for the AArch32 Cortex-A architecture support in Zephyr.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Adds a shim layer around the mcux lpc flexcomm driver to adapt it to the
zephyr i2c interface. It leverages heavily from the existing mcux lpi2c
shim driver.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Update hal_atmel to fix wrong __MPU_PRESENT definition.
see zephyrproject-rtos/hal_atmel/pull/10
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Update the hal_nordic module revision so that the nrf_radio_802154
does not use the CONFIG_ENTROPY_NAME symbol which is no longer used
in the Zephyr tree.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The board name for the nRF52840 Dongle, so far known as
nrf52840_pca10059, is renamed to nrf52840dongle_nrf52840. Its
documentation and all references to its name in the tree are updated
accordingly. Overlay and configuration files specific to this board are
also renamed, to match the new board name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Use <arch/arm/aarch32/cortex_m/cmsis.h> include instead of <zephyr.h> to
get access to Cortex-M CMSIS API.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add CSMA CA capability for the `ieee802154_nrf5` radio driver along with
appropriate implementation in the `nrf5_tx` function.
Introduce 802.15.4 radio driver with CSMA/CA support enabled. Add help
text, mentioning a list of peripherals occupied by the radio driver.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
PR https://github.com/zephyrproject-rtos/mcuboot/pull/8 was mistakenly
merged instead of pushed, which made the last 4 commits of zephyr's
mcuboot divergen in SHA with respect to the upstream ones.
In order to preserve the status of the zephyr mcuboot repo as an
exact mirror of the upstream one, a snapshot has been taken to preserve
the current SHA (0f4463caec3c3a8fac1350d0d6dfbee678a8ce06) and then the
master branch has been reset to the upstream equivalent
(7e7b4ad1999bf148f88059195f8d2e1d3dccf190). This commit switches the
pointer to the latter, but the mcuboot code itself is identical.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Include build assert macros rework.
Update pip requirements by cbor package required by MCUBoot since
https://github.com/JuulLabs-OSS/mcuboot/pull/674 was merge.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Temporary point hal_nordic to the revision
59d33bc1dd59df14feb26f0010d527c1ea7a89e8
where the changes are present (before it's updgraded),
so the CI can proceed.
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
We can build the openamp library configured with VirtIO master
support, VirtIO slave support, or both. By default both master
and slave code is enabled. We can reduce code footprint by only
build master or slave as needed.
Expose Kconfig options for Master & Slave and set them accordingly in
the sample.
Here's the code reduction we see:
For the total image we see as 1260 byte reduction:
Memory region Used Size Region Size %age Used
FLASH [Master & Slave]: 30308 B 256 KB 11.56%
FLASH [Master only] : 29048 B 256 KB 11.08%
On the remote side we see a 828 byte reduction:
Memory region Used Size Region Size %age Used
FLASH [Master & Slave]: 11564 B 64 KB 17.65%
FLASH [Slave only] : 10736 B 64 KB 16.38%
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update introduces changes to TinyCBOR CMakeList.txt that removes
it from Zephyr interface libraries.
This also fixes problem with TinyCBOR include paths not being added into
compilation, unless MCUMGR has also been selected.
Addresses GH issue: #23324
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
