The CMSIS module glue code was part of arch/ directory. Move it to
modules/cmsis, and provide a single entry point for it: cmsis_core.h.
This entry header will include the right CMSIS header (M or A/R).
To make this change possible, CMSIS module Kconfig/CMake are declared as
external, allowing us to add a new Zephyr include directory.
All files including CMSIS have been updated.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a bunch of missing "zephyr/" prefixes to #include statements in
various test and test framework files.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
In order to bring consistency in-tree, migrate all tests to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Flag was present only when ZLI was enabled. That resulted in additional
ifdefs needed whenever code supports ZLI and non-ZLI mode.
Removed ifdefs, added build assert to irq connections to fail at
compile time if IRQ_ZERO_LATENCY is set but ZLI is disabled. Additional
clean up made which resulted from removing the ifdef.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Some test suites depend on determining at run-time
an available IRQ line which can then be used to execute
the test suite. This logic cannot used if the available
IRQ line is not targeting the current security state.
Therefore, filter out the _ns Cortex-m boards from
running these tests suites (i.e. when building with
CONFIG_TRUSTED_EXECUTION_NONSECURE=y) since we can not
contol the target state of the NVIC interrupt lines.
These tests suites test generic ARM features, that do
not depend on TrustZone-M configuration, so it is OK
that they are only executed on ARM platforms without
the NONSECURE configration set.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit reworks the .yaml files in Cortex-M
test suites, by grouping the common configuration
under the common: section. This considerably cleans
up the test suite configuration.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove special handling of the ARM Cortex-M1 DesignStart FPGA reference
design running on the Digilent Arty after CONFIG_NUM_IRQS was reduced
from 8 to 7.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Extend check to determine a usable ARM NVIC IRQ line to verify that the
IRQ line is not always pending.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
We add a simple test-case for verifying the behavior of the
Cortex-M IRQ target state management. We add an additional
test only for TrustZone-enabled Cortex-M targets running
in Secure mode. We explicitly exclude ARMv8-M platforms that
enable Non-Secure FW build by default from running the test.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add support for the Cortex-M1 ARM DesignStart FPGA reference design
running on the Digilent Arty development board.
This board uses IRQ 7 (the last IRQ) as a level-detect non-interrupt
signal to determine whether the V2C-DAPLINK shield is installed. This
IRQ line is always pending when the shield is not installed. Use IRQ 6
instead.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
This commit fixes Cortex-M header inclusions from the deprecated paths.
The Cortex-M headers were relocated from `include/arch/arm/cortex_m` to
`include/arch/arm/aarch32/cortex_m` by the refactoring done in the
commit d048faacf2.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
... because it is (required).
This makes a difference when building with CMake and forgetting
ZEPHYR_BASE or not registering Zephyr in the CMake package registry.
In this particular case, REQUIRED turns this harmless looking log
statement:
-- Could NOT find Zephyr (missing: Zephyr_DIR)
-- The C compiler identification is GNU 9.3.0
-- The CXX compiler identification is GNU 9.3.0
-- Check for working C compiler: /usr/bin/cc
-- ...
-- ...
-- ...
-- Detecting CXX compile features
-- Detecting CXX compile features - done
CMake Error at CMakeLists.txt:8 (target_sources):
Cannot specify sources for target "app" which is not built by
this project.
... into this louder, clearer, faster and (last but not least) final
error:
CMake Error at CMakeLists.txt:5 (find_package):
Could not find a package configuration file provided by "Zephyr" with
any of the following names:
ZephyrConfig.cmake
zephyr-config.cmake
Add the installation prefix of "Zephyr" to CMAKE_PREFIX_PATH or set
"Zephyr_DIR" to a directory containing one of the above files. If
"Zephyr" provides a separate development package or SDK, be sure it
has been installed.
-- Configuring incomplete, errors occurred!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Using find_package to locate Zephyr.
Old behavior was to use $ENV{ZEPHYR_BASE} for inclusion of boiler plate
code.
Whenever an automatic run of CMake happend by the build system / IDE
then it was required that ZEPHYR_BASE was defined.
Using ZEPHYR_BASE only to locate the Zephyr package allows CMake to
cache the base variable and thus allowing subsequent invocation even
if ZEPHYR_BASE is not set in the environment.
It also removes the risk of strange build results if a user switchs
between different Zephyr based project folders and forgetting to reset
ZEPHYR_BASE before running ninja / make.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
In the function irq_connect_dynamic, it will check if the irq is
disable. If the irq is enable ,it will assert.So before invoking
the function irq_connect_dynamic, it must disable the irq.
Signed-off-by: box zheng <box.zheng@intel.com>
We add a test-suite for the newly introduced feature of
ARM Dynamic Direct Interrupts.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Move the zero-latency IRQ test into the new
arm_irq_advanced_features' test suite. Skip
running the test for non Mainline Cortex-M.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
