rand32.h does not make much sense, since the random subsystem
provides more APIs than just getting a random 32 bits value.
Rename it to random.h and get consistently with other
subsystems.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fix few mismatched CONTAINER_OF, one missing k_work_delayable_from_work
conversion and few cases where the target should be pointing at the
first element explicitly.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Currently, if CONFIG_SLIP_TAP is enabled (default for QEMU), and no
other Ethernet driver is enabled, the following warning is printed by
CMake:
No SOURCES given to Zephyr library: drivers__ethernet
This happens because SLIP_TAP enabled Ethernet L2, but has no actual
sources in drivers/ethernet. This commit fixes this, by moving the
actual definition of the SLIP TAP Ethernet interface into a separate
file, within drivers/ethernet. Technically, in that configuration SLIP
defines a Ethernet device, implementing Ethernet API, so such a change
is justifiable, and prevents unwanted warning from being generated.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
net_pkt_get_frag() and a few other functions did not specify the
allocated fragment length, incorrectly assuming that fixed-sized
buffers are always used.
In order to make the function work properly also with variable-sized
buffers, extend the function argument list with minimum expected
fragment length parameter. This allows to use net_buf_alloc_len()
allocator in variable buffer length configuration, as well as verify if
the fixed-sized buffer is large enough to satisfy the requirements
otherwise.
Update the existing codebase to provide the expected fragment length,
based on the context.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
While the 'count' value "should" never be larger than two digits,
increase the size of the snprintk buffer to be large enough to hold
the longest possible value.
Signed-off-by: Keith Packard <keithp@keithp.com>
The uart_pipe driver is not dependent on any console driver,
however a serial driver is required.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
In order to bring consistency in-tree, migrate all drivers to the new
prefix <zephyr/...>. Note that the conversion has been scripted, refer
to #45388 for more details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit fixes the following issue:
When using slip without TAP, i.e. CONFIG_SLIP_TAP=n (default), while
another ethernet interface is enabled and sets CONFIG_NET_L2_ETHERNET=y.
This causes ethernet_init() to be wrongly called with struct dummy_api
instead of struct ethernet_api.
ethernet_init() expects struct ethernet_api (by cast), so we end up
with the get_capabilities field pointing to garbage!
Actually, as we are using the dummy api, we don't need to call
ethernet_init() at all.
Sole dependency on CONFIG_NET_L2_ETHERNET is wrong because it
can be enabled by another interface.
Signed-off-by: David Komel <a8961713@gmail.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Unit tests were failing to build because random header was included by
kernel_includes.h. The problem is that rand32.h includes a generated
file that is either not generated or not included when building unit
tests. Also, it is better to limit the scope of this file to where it is
used.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
By changing the various *NET_DEVICE* macros. It is up to the device
drivers to either set a proper PM function or, if not supported or PM
disabled, to use device_pm_control_nop relevantly.
All existing macro calls are updated. Since no PM support was added so
far, device_pm_control_nop is used as the default everywhere.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For example it should be possible to compile and use the SLIP module
with NET_L2_DUMMY. This required the following changes:
* Fix a typo in the initializer for struct dummy_api
* Only define eth_capabilities if CONFIG_NET_L2_ETHERNET is defined to
silence a -Wunused-function compiler warning
* Unconditionally include net/dummy.h
Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net>
Without this change compilation of the SLIP module would fail if LLDP
wasn't enabled. There is also no need to include net/lldp.h explicitly
as net/ethernet.h will include it conditionally if CONFIG_NET_LLDP is
defined.
Signed-off-by: Sören Tempel <soeren+git@soeren-tempel.net>
No need to hide the symbols in the header file if CONFIG_NET_LLDP
is not enabled. This also allows the documentation to be generated
properly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
There is no need to reserve any space for each frag, as the l2 will
allocate a frag for the ethernet header, arp will do the same.
This is one step further to removing the concept of ll reserve.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Enable LLDP TX support on the slip ethernet driver.
Now when CONFIG_NET_LLDP is enabled, one can easily verify on a sniffer
(i.e. wireshark) that LLDP frames are being sent at the configured
interval with all mandatory TLVs enabled.
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Curently only link speed is exposed.
Opportunity taken to remove any post-fix enumerating the iface init
and/or the api: these must be generic and used by all the instances.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Create infrastructure that allows ethernet device driver to tell
if it supports network packet checksum offloading. This applies only
to IPv4, UDP or TCP checksums. The driver can enable/disable checksum
offloading separately for Tx and Rx network packets.
If the device (ethernet in this case) can calculate the network
packet checksum for IPv4, UDP or TCP, then do not calculate the
corresponding checksum by the stack itself.
Fixes#2987
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As following commits need this functionality, create a function
which converts "01:02:ab:fe:34:dd" type hex strings to array of
bytes. Change the SLIP driver to use this new function.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make drivers/net/ be the place for misc networking-related drivers
(otherwise, we'd need to have a new dir per driver).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
