Update the presentation of the hardware hierarchy description so that it
does not appear to have missing words at the end of the bullet points,
by using a paragraph instead. And tweak the wording slightly.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
It makes more sense that way:
A developer wants to know in order:
- what features we have
- if they are qualified/qualifiable
- how the stack is architected / what parts are where
- how to develop an app
- tools to develop said apps (+ shell)
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
It adds unnecessary noise in the navigation pane.
We don't do this for other chapters (e.g. kernel services don't say
"Kernel Services System Threads" in the title, just "System Threads").
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
This page only ever had one section: supported features.
Added links to the relevant sections for each layer.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Add enum for `constant-charge-voltage-max-microvolt` property to
signalize improper values given with device tree at compile time.
Signed-off-by: Lukasz Madej <l.madej@grinn-global.com>
Maximum charging current is selected with an external resistor in
the MAX20335 charger. Therefore it is not possible to configure it
with software directly. There is only a capability to limit current
set with hardware but configuration of the limiter is not
straight-forward.
To reflect real functionality, drop usage of
`constant-charge-current-max-microamp` property as an required one and
use custom `chgin-to-sys-current-limit-microamp` instead.
Use enum in binding file to signalize improper values at compile time.
Drop support for `CHARGER_PROP_CONSTANT_CHARGE_CURRENT_UA` API property
since this cannot be handled.
The `max20335_get_constant_charge_current()` function become useless so
remove it.
Signed-off-by: Lukasz Madej <l.madej@grinn-global.com>
Quite many users do not know that it exists, as we
don't seem to have it documented anywhere.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Support `zephyr-app-commands` being provided with a `snippets`,
option, to specify building with the listed snippets.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Rework the data scaling algorithm for the "deadzone" mode so that the
deadzone is subtracted from the input rather than from the output. This
makes the whole output range usable rather than making the output jump
from the center value to the minimum deadzone range.
This changes the calibration data structure as well so now all values
refer to the input data, which is more coherent.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Add support to coredump_gdbserver.py for running in a pipeline,
communicating through stdin/stdout instead of a socket.
This allows starting it from inside gdb, with:
target remote | coredump_gdbserver.py --pipe <elf_file> <log_file>
Signed-off-by: Kevin ORourke <kevin.orourke@ferroamp.se>
Putting a space between and the PR number causes the rendered
text to not link to the issue.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Previously, XSI_THREADS_EXT included a note about
undefined behaviour. However, the required functions
pthread_attr_getstack(), pthread_attr_setstack(),
pthread_getconcurrency(), and pthread_setconcurrency()
are all conformant.
Remove the unneeded note (all of them)
Signed-off-by: Chris Friedt <chrisfriedt@gmail.com>
The BT subsystem has not been officially qualified for a somewhat long
time now. The code has diverged quite a bit from what it was.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
In preparation of further cleanup commits.
Removes noise in the navigation pane in the rendered docs.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
A Kconfig item is added and the buffer
is embedded into the modem_cmux struct.
The default value is increased from 16 to 64 bytes in
an effort to reduce the number of modem_pipe_receive() calls.
CONFIG_MODEM_CHAT_LOG_BUFFER is renamed
to CONFIG_MODEM_CHAT_LOG_BUFFER_SIZE for consistency.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The virtual interface API "input" callback is removed and
its functionality is implemented in "recv" callback.
This change affected the IP tunneling implementation in the
network stack.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Mark pthread_rwlockattr_setpshared() and
pthread_rwlockattr_getpshared() as supported in the POSIX
Options documentation.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Add documentation on relevant sections to list addition of Bluetooth LE
service NUS (Nordic UART Service), as well as the UART driver for UART
over Bluetooth LE and snippets to easily enable it.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Mark the POSIX_SINGLE_PROCESS Option Group as supported
in PSE51, PSE52, and PSE53 Application Environment
Profiles.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
The `_POSIX_CPUTIME` interface requires
`CLOCK_PROCESS_CPUTIME_ID` and `clock_getcpuclockid()` to be
present. Both of those are now available and therefore we can
mark `_POSIX_CPUTIME` as supported for PSE53.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Previously, XSI_THREADS_EXT included a note about
undefined behaviour. However, the required functions
pthread_attr_getstack(), pthread_attr_setstack(),
pthread_getconcurrency(), and pthread_setconcurrency()
are all conformant.
Remove the unneeded note.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
Followup: #69905
Adopting new board terminology for CMake, python, and Kconfig code to
use qualifiers instead of identifiers.
Also adjusted to board target where applicable.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
As we are replacing native_posix with native_sim, let's
use native_sim instead of native_posix as example platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add a terminology section to the board porting guide.
This provides a single location where terminologies used for boards can
be found and linked to.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fixes a typo found by @bryceschober
Spell-checked the rest of the document and found no issues.
Signed-off-by: Glenn Andrews <glenn.andrews.42@gmail.com>
This commit adds a tutorial on how to set up, build, and debug
a sample Zephyr application in CLion.
Signed-off-by: Marina Kalashina <marina.kalashina@jetbrains.com>
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
A new extension, api_overview.py, is used to, leveraging doxygen's
Python module doxmlparser, parse the doxygen generated XML files.
All groups ('defgroup' and 'addtogroup' tags) are collected, alongside
their 'version' and 'since' info.
From there, a new Sphinx directive `api-overview-table` is populated,
including the name of the group, and if available, their 'since' and
'version' information.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It will be necessary to parse the doxygen XML files to extract `since`
and `version` from them.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
