Since there are no more users and dependencies of
Kconfig option USB_UART_CONSOLE in the tree,
remove the remains and the option USB_UART_CONSOLE.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Do not change init level and priority of console driver
if Kconfig option CONFIG_USB_UART_CONSOLE is enabled because
commit 37f4d9ba63
("usb: cdc_acm: rework cdc_acm_poll_out to non-blocking")
changed CDC ACM UART driver so that it more closely mimics
the real controller and CDC ACM UART driver now uses the same
init level and priority as regular serial driver.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
With the introduction of `EXPERIMENTAL` and `WARN_EXPERIMENTAL` in
Zephyr all drivers settings having `[EXPERIMENTAL]` in their
prompt has has been updated to include `select EXPERIMENTAL` so that
developers can enable warnings when experimental features are enabled.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Refactors all of the console drivers to use a shared driver class
initialization priority configuration, CONFIG_CONSOLE_INIT_PRIORITY, to
allow configuring console drivers separately from other devices. This is
similar to other driver classes like I2C and SPI.
The default is set to CONFIG_KERNEL_INIT_PRIORITY_DEFAULT to preserve
the existing default initialization priority for most drivers.
The driver-specific option, CONFIG_NATIVE_POSIX_CONSOLE_INIT_PRIORITY,
is left intact because the native posix console driver needs to
initialize after the UART console driver when both drivers are enabled.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Some functions were being re-defined as macros if certain conditions
were not met.
Fix violations to rule 5.5
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
console_input_init is only used in the same scope it is implemented.
There is not need to have it defined elsewhere.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Add support for Quectel modem in gsm_ppp modem driver.
The CMUX cmd is based on MUX application notes v1.0(2020-09-22)
for BG95, BG77 and BG600L. Tested and working on EC21e.
As the gsm_ppp doesn't do power control, it is required to power
on the modem manually in the application.
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Remove CONFIG_UART_MCUMGR_ON_DEV_NAME and use
DEVICE_DT_GET(DT_CHOSEN(zephyr_uart_mcumgr)).
Add usb.overlay, which contains chosen node and cdc-acm-uart node,
to smp_svr sample.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Remove device_get_binding(CONFIG_UART_CONSOLE_ON_DEV_NAME)
and use DEVICE_DT_GET(DT_CHOSEN(zephyr_console)) to get
chosen "zephyr,console" node.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Also sort the entries alphabetically.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This changes the init priority of native posix console to 99.
When building for native_posix, it is usually assumed that
the output would be stdout. With old priority at 60, UART
console, for example, can be initialized later which means
printk() would not go to stdout. So changing the native posix
console to be (hopefully) initialized last.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The logging macros use _Generic() atm and it started to complain
when we are trying to print pointer value of gsm_dlci and gsm_mux
structs. Cast the pointer value to (void *) to overcome this.
Fixes#35329
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Replace all existing deprecated API with the recommended alternative
for gsm_mux and uart_mux drivers.
Fixes#34103
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This CL introduces two configuration options which allows a notification
to the power management module that the UART console module is in use
now. If the interval of console module doesn't receive any input message
exceeds expired timeout, the power management module is allowed to enter
sleep/deep sleep state and turn off the clock of console module.
This mechanism gives a window in which the users can organize input
message if CONFIG_PM is enabled.
Signed-off-by: Mulin Chao <mlchao@nuvoton.com>
Currently there is no way to distinguish between a caller
explicitly asking for a semaphore with a limit that
happens to be `UINT_MAX` and a semaphore that just
has a limit "as large as possible".
Add `K_SEM_MAX_LIMIT`, currently defined to `UINT_MAX`, and akin
to `K_FOREVER` versus just passing some very large wait time.
In addition, the `k_sem_*` APIs were type-confused, where
the internal data structure was `uint32_t`, but the APIs took
and returned `unsigned int`. This changes the underlying data
structure to also use `unsigned int`, as changing the APIs
would be a (potentially) breaking change.
These changes are backwards-compatible, but it is strongly suggested
to take a quick scan for `k_sem_init` and `K_SEM_DEFINE` calls with
`UINT_MAX` (or `UINT32_MAX`) and replace them with `K_SEM_MAX_LIMIT`
where appropriate.
Signed-off-by: James Harris <james.harris@intel.com>
This also makes it into arch_printk_char_out() which gets linked
in place of the weak symbol version, meaning printk() is usable
as soon as the stack is set up.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Convert driver(s) to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Put everything inside an if, we should not see anything related to
uart_mux in generated .config if it is not enabled.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The mcumgr header files are now in include/mgmt/mcumgr/, so reflect this
change in the UART console implementation.
Fixes#30261.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When PPP is muxed, using uart_poll_out resulted in each byte getting
wrapped in a muxing header. This led to UART bombardment which
can quickly cause some modems to hang and panic. This was observed
regularly using a SIMCOM7600E modem.
A perfect fix would involve rewriting ppp.c, uart_mux.c and
modem_iface_uart.c to all use another UART API, but that would be more
invasive by several orders of magnitude than this one, which utilizes
the fact that the uart_mux implementation of uart_fifo_fill does NOT
require ISR context. Since the Zephyr UART API states that the behavior
of uart_fifo_fill outside of ISR context is implementation defined, this
should be kosher.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
These changes enable applications to restart the networking stack which
was previously not possible without rebooting the device. This was a
major show-stopper because it made power management impossible, and
furthermore made it impossible to recover from a bad modem state without
rebooting.
This has been verified to work on a SIMCOM7600E modem, both with and
without CONFIG_GSM_MUX enabled.
Signed-off-by: Benjamin Lindqvist <benjamin.lindqvist@endian.se>
Replace all calls to the assert macro that comes from libc by calls to
__ASSERT_NO_MSG(). This is usefull as the former might be different
depending on the libc used and the later can be customized to reduce
flash footprint.
Signed-off-by: Xavier Chapron <xavier.chapron@stimio.fr>
Add console over Inter Processor Mailboxes (IPM).
This is useful for AMP processors like ADSP found on up_squared board.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The conversion last year mixed up uart-pipe with uart-mcumgr. Revert
to the pre-conversion relationship.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ringbuf claim API returns pointer to contiguous area. In cases when data
in ringbuf wraps the end of internal buffer, then single call to claim
data is not enough to get all data - there is remaining part on the
beginning of internal buffer. Those remaining bytes will need to wait
for next ISR handler to trigger workqueue. Theoretically this means that
data on the beginning of ringbuf can wait there forever.
Consume data from ringbuf in a loop, stopping only when claiming results
in empty buffer. This will make sure that there is no stale data in the
ringbuf.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
This patch removes unused Kconfig option from console
subsystem. If application wants to wait until the console
port is connected, enabled and ready to receive data
it should use uart_line_ctrl_get() API function and
check for DTR flag.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
usb_enable() must be called once by the application.
The application may want to register usb_dc_status_callback
and trace usb status codes (usb_dc_status_code).
After this patch all pre APPLICATION messages will be dropped
as USB console device is enabled in the application.
Application waits for console device until its ready by checking DTR
flag - uart_line_ctrl_get(). This function could be dropped but then
some log messages that were generated before USB device is ready
could also be dropped.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
This set of functions seem to be there just because of historical
reasons, stemming from Kbuild. They are non-obvious and prone to errors,
so remove them in favor of the `_ifdef()` ones with an explicit
`CONFIG_` condition.
Script used:
git grep -l _if_kconfig | xargs sed -E -i
"s/_if_kconfig\(\s*(\w*)/_ifdef(CONFIG_\U\1\E \1/g"
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
In order to be able to add more entries under 'subsys/mgmt', move the
current contents of it, which relate exclusively to MCUMgr, to its own
folder.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Of course IPM drivers now provide their device instance. There are 2
drivers using IPM callbacks as well, so they get the imp device instance
pointer now through the callback.
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It was already using uart_irq_callback_user_data_set below, now it also
uses uart_irq_callback_user_data_t as callback type, so let's normalize
the callbacks.
Fixes#26923
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
