The Virtual LAN is changed to use the virtual network interfaces.
Add information what changes might be needed because of this.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add enum for `constant-charge-voltage-max-microvolt` property to
signalize improper values given with device tree at compile time.
Signed-off-by: Lukasz Madej <l.madej@grinn-global.com>
Maximum charging current is selected with an external resistor in
the MAX20335 charger. Therefore it is not possible to configure it
with software directly. There is only a capability to limit current
set with hardware but configuration of the limiter is not
straight-forward.
To reflect real functionality, drop usage of
`constant-charge-current-max-microamp` property as an required one and
use custom `chgin-to-sys-current-limit-microamp` instead.
Use enum in binding file to signalize improper values at compile time.
Drop support for `CHARGER_PROP_CONSTANT_CHARGE_CURRENT_UA` API property
since this cannot be handled.
The `max20335_get_constant_charge_current()` function become useless so
remove it.
Signed-off-by: Lukasz Madej <l.madej@grinn-global.com>
Rework the data scaling algorithm for the "deadzone" mode so that the
deadzone is subtracted from the input rather than from the output. This
makes the whole output range usable rather than making the output jump
from the center value to the minimum deadzone range.
This changes the calibration data structure as well so now all values
refer to the input data, which is more coherent.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Putting a space between and the PR number causes the rendered
text to not link to the issue.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
A Kconfig item is added and the buffer
is embedded into the modem_cmux struct.
The default value is increased from 16 to 64 bytes in
an effort to reduce the number of modem_pipe_receive() calls.
CONFIG_MODEM_CHAT_LOG_BUFFER is renamed
to CONFIG_MODEM_CHAT_LOG_BUFFER_SIZE for consistency.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The virtual interface API "input" callback is removed and
its functionality is implemented in "recv" callback.
This change affected the IP tunneling implementation in the
network stack.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add documentation on relevant sections to list addition of Bluetooth LE
service NUS (Nordic UART Service), as well as the UART driver for UART
over Bluetooth LE and snippets to easily enable it.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
Add a note about the ``sample-point`` and ``sample-point-data`` CAN
devicetree properties now being optional.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add release notes related to the added support for minimum supported CAN
transceiver/controller bitrates.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Commit adds const qualifier to models metadata.
Specification claims: Composition Metadata Page 0
shall not change during a term of a node on the network.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Due to the source/header files are moved to subfolder "classic",
rename the kconfig option BT_BREDR to BT_CLASSIC to make the
folder name and kconfig option name consistent.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
The IPv4 netmask handling is changed and it might need
adjustments from user if using more than one IPv4 address
inside one specific network interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
ws2812-gpio's `in-gpios` property is not used as an input pin.
Renaming it to `gpios` to reflect the actual situation.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
There are two kconfigs that are security related and are x86
specific. Prefix them with X86 to put them under the x86
namespace.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The current board porting guide explains the new hardware model without
making any references to the previous one. Add a new section that
explains the rationale behind the transition as well as adding important
bits of information for users that need to convert their boards.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update the documentation page to reflect the latest LTSv2
release and tentative end-of-life (EOL) date.
Note: the actual EOL date is still dependant on the
official LTSv3 release date and may be subject to change.
Signed-off-by: Christopher Friedt <cfriedt@meta.com>
The zperf received or sent bytes length and duration are in 32bits,
if running long-duration zperf test more than 20min, the value will
overflow, and the test result is wrong. Change it to 64bits can fix
this issue.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Adds v3.6.0 to the list of supported releases. The EOL date corresponds
to the expected release date for v4.0.0.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Fixes grammar, punctuation, and spelling errors in the v3.6.0 release
notes.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Divide the "Device Drivers and Devicetree" section into subsections for the
various driver classes.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Group related entries under subheadings and add a local table of contents
to improve readability.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove the Recommended Changes section from the migration guide so that it
only contains required changes. This aligns with the decision made in the
Architechture WG on 2023-10-24.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
