Bluetooth Mesh Protocol 1.1 is backward compatible with Bluetooth Mesh
Profile 1.0.1, therefore the stack can still be qualified for 1.0.1 if
needed. But explicit support for both versions requires additional
maintenance efforts and doubles the CI time. To make the stack
qualifiable for 1.0.1, the one needs to remove Private Beacons reception
and compile out SHA256 algorithm support.
What is changed:
- Removed `CONFIG_BT_MESH_V1d1` option.
- Removed `transport_legacy.c` which was using 1.0.1 implementation. The
new transport layer has new SaR logic that should still be possible to
qualify for 1.0.1.
- Removed the legacy transport Kconfig options. They are superseded by
the new transport Kconfig options.
- Tester app: `overlay-mesh-v1d1.conf` is merged into
`overlay-mesh.conf`.
- Removed BabbleSim tests for 1.0.1.
- Updated documentation.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Since it takes 400 bytes of code and it is rarely used disable
by default this feature.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
The `SHELL_UART_DEFINE` macro was previously
`SHELL_UART_DEFINE(_name, _tx_ringbuf_size, _rx_ringbuf_size)`,
before it got removed in #63967 and then reinstated in #66218 as
`SHELL_UART_DEFINE(_name)`.
However its current form isn't compatible with previous Zephyr
version, and would cause compilation error when an application
migrates from to v3.6, let's modify it to accept variable
arguments for now.
Added documentation for this public API and updated the
migration guide accordingly.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Previously it was not always possible to prepend the header.
It was not possible if the application neglected to reserve the space
for headers. This is bad because it forces a buffer segment allocation
even if the buffer had enough room for the headers. E.g. a payload of 10
bytes in a netbuf of 30 bytes would have been segmented.
We now explicitly reject the buffer if it does not have the headroom.
This allows us to do a nice thing; simplify L2CAP segmentation.
We convert the SDU from the application into a PDU payload, by
prepending the SDU header, i.e. the SDU length in the original buffer.
This PDU payload is ready to be chunked into PDUs without having to keep
track of where in the SDU we are. This has the effect of removing a
bunch of logic in the segmentation machine.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
No point marking the phy API to be callable from usermode,
the device cannot be accessed from usermode anyway so this
is pointless. User can call the phy API from supervisor mode
thread just fine.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
It seems like a nice idea at first, but leads to hard-to-debug
situations for the application.
The previous behavior can be implemented by the app by defining
`alloc_seg` and allocating from the same pool as `buf`.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Mention the change in the microchip,mcp320x bindings to use the common
io-channel-cells name "input" instead of "channel".
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add a note describing the new default for the STM32H7 FDCAN CAN controller
domain/kernel clock and how to override it.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Mention the change in the ti,lmp90xxx bindings to use the common
io-channel-cells name "input" instead of "positive" and "negative".
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Remove `IEEE802154_SELECTIVE_TXPOWER` option.
Cache the tx power value in nRF5 driver and make use of it on each
operation.
Signed-off-by: Eduardo Montoya <eduardo.montoya@nordicsemi.no>
Signed-off-by: Jędrzej Ciupis <jedrzej.ciupis@nordicsemi.no>
Add a note about the new K_MEM_POOL_HEAP_SIZE define and the mechanism
for specifying custom system heap size requirements.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add an entry to indicate the changes to the coap_service_send and
coap_resource_send API functions.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Why?
- metadata is easier to manage as an array + index
- less error-prone -> less memory-management bugs
- we can. because of the previous refactor
- PDU allocations are more predictable
- ATT buffer size can be optimized by app
- isolates ATT from the rest of the ACL users
- decouples ATT PDU size from e.g. SMP w/ LESC
Drawbacks:
- higher memory usage
- kconfig change
The higher memory use is only temporary, as this will be followed-up
with more refactors that should bring it back down.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Co-authored-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Replace function parameter 'retries' with pointer to structure
holding coap transmission parameters. This allows setting the
retransmission parameters individually for each pending request.
Add coap transmission parameters to coap_pending structure.
Update migration guide and release notes.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Renames "prov device" references and options to
"provisionee" to align implementation with Mesh
Protocol specification v1.1, section 5.4.
Signed-off-by: Anders Storrø <anders.storro@nordicsemi.no>
There is no in-tree user. Also, it is misleading as we use
SCOMPARE1 for spinlock too, not just IPC.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC should be defined at the SoC
or the board level since Xtensa cores are high configurable.
The default is just for ISS (Instruction Set Simulator). So
remove it from the arch level.
The xt-sim board is the only one in tree that is targeting
the ISS, so add it there.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Rename the native Linux SocketCAN driver to reflect that it can can now be
used in both native_posix and native_sim (with or without an embedded
C-library).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Update migration guide to introduce the stm32_lp_tick_source
for stm32 device when choosing the LPTIM fo lowPower modes.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Commit adds implementation of the specification
recommendations regarding randomization of
responses on the access layer.
3.7.3.1 Transmitting an Access messages
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Adds a note that the shell mcuboot erase command can no
longer erase the MCUboot or application slots
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Update the release notes and migration guide for CoAP events using
the Network Events subsystem.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Add information about the IPv4 multicast IP_ADD_MEMBERSHIP and
IP_DROP_MEMBERSHIP socket options.
Add information about the IPv6 multicast IPV6_ADD_MEMBERSHIP and
IPV6_DROP_MEMBERSHIP socket options.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add information about IPv4 TTL and IPv6 hoplimit changes
for unicast and multicast packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add information about IPv4 TTL and IPv6 hoplimit changes
for unicast and multicast packets.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
native_sim is superceeding native_posix.
Let's recommend users to use it instead.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
These were first deprecated in v3.2. We have kept support for them
for as long as we can, but now their presence is causing CI failures
in some configurations. Specifically, using the deprecated 'label'
property is causing a warning which is promoted to an error in some
twister runs. This is blocking other forward progress in the
devicetree API.
I tried to rework the tests to avoid this, but it was too much effort
for the time I had to work on the task. Removing the APIs is therefore
unfortunately the best way forward to unblocking other work.
Re-work the test suite a bit to maintain coverage where we are using
the label property to test other macros.
Add a migration guide section to help with the transition.
Signed-off-by: Martí Bolívar <mbolivar@amperecomputing.com>
Note that native_sim is replacing native_posix as default
test platform.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This allows HCI drivers to expose vendor-specific functions to set the
public address.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Add a name for the Kconfig choice symbol
indicating the Zbus subscriber buffer allocation
and adjust the name of the existing choices.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
