Deprecate the xoroshiro128+ PRNG algorithm in favour of xoshiro128++.
xoshiro128++ is a drop-in replacement which is invisible from the user
perspective.
xoroshiro128+ is unsuitable because it is explicitly a floating-point
PRNG, not a general-purpose PRNG. This means that the lower 4 bits of
the output are actually linear, not random (from the designers,
https://prng.di.unimi.it/). This means 1/8th of the generated data is
not random.
Additionally, xoroshiro128+ is not a 32bit algorithm, it operates on
64bit numbers. For the vast majority of Zephyr devices, this makes the
PRNG slower than it needs to be. The replacement (xoshiro128++) is
32bit, with no loss in state space (still 128 bit).
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Instead of passing target states, use actions for device PM control.
Actions represent better the meaning of the callback argument.
Furthermore, they are more future proof as they can be suitable for
other PM actions that have no direct mapping to a state. If we compare
with Linux, we could have a multi-stage suspend/resume. Such scenario
would not have a good mapping when using target states.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Return -ENOTSUP if the requested state is not supported
- Remove redundant "noop style" functions.
- Use switch everywhere to handle requested state (not necessary in all
drivers, but better take off with consistency in place after current
changes).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The device PM control function will only be called if the requested
state is different from the current one. A significant amount of drivers
were checking for state changes, now unnecessary. This patch removes all
this redundant logic.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since the state is no longer modified by the device PM callback, just
use the state value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The callback is now invoked to set the device PM state in all cases, so
the usage of ctrl_command is redundant.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The device PM subsystem already holds the device state, so there is no
need to keep duplicates inside the device. The pm_device_state_get has
been refactored to just return the device state. Note that this is still
not safe, but the same applied to the previous implementation. This
problem will be addressed later.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
According to the Reference Manual of several series(G0,L5,WL,WB,...)
RNG_DR register value should only be used if it is different from 0:
"Because when it is the case a seed error occurred between RNG_SR
polling and RND_DR output reading (rare event)."
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit introduces an automatic recovery procedure in cases an
entropy source error was detected.
- On Series with soft reset support a soft rest is executed.
- On Series w/o soft reset support the pipeline is cleared by reading
the RNG_DR 12 times.
With this changes the check for seed errors uses SEIS flag instead
of the SECS flag.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
This commit adds entropy support for stm32wl and stm32g0.
Pll is used as clock source and has to be enabled,
other clock sources are not supported at the moment.
Signed-off-by: Thomas Stranger <thomas.stranger@outlook.com>
The callback is not used anymore, so just delete it from the pm_control
callback signature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
the device PM callback is not used anymore by the device PM subsystem,
so remove it from all drivers/tests using it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This commit selects LL_RCC_RNG_CLKSOURCE_CLK48 as a clock source
to rng peripheral. LL_RCC_RNG_CLKSOURCE_CLK48 is CLK48 divided by 3.
Signed-off-by: Krishna Mohan Dani <krishnamohan.d@hcl.com>
Move all PM_DEVICE_STATE_* definitions to an enum. The
PM_DEVICE_STATE_SET and PM_DEVICE_STATE_GET definitions have been kept
out of the enum since they do not represent any state. However, their
name has not been changed since they will be removed soon.
All drivers and tests have been adjusted accordingly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The context parameter used across device power management is
actually the power state. Just use it and avoid a lot of
unnecessary casts.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Function random_byte_get() returns only the least significant byte of
the 32-bit random datum, as this is the used value, so avoiding that
higher numbers are interpreted as negative error codes and their value
is not discarded.
Signed-off-by: Giancarlo Stasi <giancarlo.stasi.co@gmail.com>
Convert from device_get_binding to DEVICE_DT_GET. In doing this we
no longer need the label in the devicetree node so we remove that.
Removed all __ASSERT_NO_MSG(clk) since we'll get a build error if
DEVICE_DT_GET cant be satisfied, and the clock control api's will
handle reporting if the device_is_ready.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove conditionals (PM_DEEP_SLEEP_STATES and PM_SLEEP_STATES) from
power management code. Now these features are always available when
power management is enabled.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Migrate the whole pm subsystem to use new power states information
from power_state.h and get states and residency properties from
device tree.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Now that we generate a header that extern's all possible devicetree
based device struct we can remove DEVICE_DT_DECLARE and
DEVICE_DT_INST_DECLARE as they aren't needed anymore.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
core-macros.h includes other files not part of the xtensa HAL, make this
esp32 specific
Fixes#31301
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Convert entropy drivers to use new DT variants of the DEVICE APIs.
DEVICE_AND_API_INIT -> DEVICE_DT_DEFINE
DEVICE_GET -> DEVICE_DT_GET
etc..
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
For drivers that support CONFIG_DEVICE_POWER_MANAGEMENT there are some
cases that look like:
#ifdef CONFIG_DEVICE_POWER_MANAGEMENT
DEVICE_DEFINE()
#else
DEVICE_AND_API_INIT()
#endif
There is no need to special case this as the pm_control_fn argument to
DEVICE_DEFINE will just be ignored in the
!CONFIG_DEVICE_POWER_MANAGEMENT case. So we can cleanup the code a
little and remove the #else cases for the drivers that do this.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
"unused value" issue reported by Coverity (CID: 214211).
This is actually a true bug as reported error is erased
and not taken into account.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Due to HSEM implementation #24862, USB CLK48 lock implementation
#25850 should be reworked.
And by the way, implement the same in entropy which is using the
same clock.
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
RCC_HSI48_SUPPORT is not always defined even if SOC support HSI48.
Ex: STM32H7 family which support HSI48 but doesn't have
switch RCC_HSI48_SUPPORT.
This switch is usefull when in the same STM32 family some soc have
HSI487 and some other soc not.
So instead, use CMSIS register defines (which depends on family)
Signed-off-by: Alexandre Bourdiol <alexandre.bourdiol@st.com>
This commit adds a dependency on the TRNG resource in the TI Power
module, prevents the system policy from entering standby when TRNG is
active, and adds support for device PM.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Add a DSB before doing WFE in get_entropy_isr, to ensure
the memory transactions are complete.
Add a note clarifying a dependency for the existing solution
(dependency is satisfied by ARCH code but is good to state
clearly).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We need to clear the NVIC Pending bit for the RNG IRQ before
doing any WFEs and expect to wake up by RNG events. This is
because the event register will be set only if NVIC status
is changed from 0 to 1.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
A non-blocking, isr-safe version of get_entropy() is necessary in order
to be called during boot time before POST_KERNEL initialization.
Otherwise a crash is seen as the existing get_entropy() implementation
uses k_sem and relies on interrupts.
Fixes#18629
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Add the necessary clock configuration to support STM32L-based
SoCs. This change likely adds support for other STM32 SoCs as well
since the HSI48 clock is configured for all SoCs that support it
(except the STM32L4x) instead of just the STM32G4X.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
The driver-specific config_info structure referenced from the device
structure is marked const. Some drivers fail to preserve that
qualifier when casting the pointer to the driver-specific structure,
violating MISRA 11.8.
Changes produced by scripts/coccinelle/const_config_info.cocci.
Some changes proposed by the script are not included because they
reveal mutation of state through the const pointer, though the
code works as long as the driver-specific object is defined without
the const qualifier.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Now that all entropy drivers use DTS we can remove HAS_DTS_ENTROPY being
set everywhere as well as Kconfig ENTROPY_NAME since that is now coming
from DT_ENTROPY_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
To ease driver configuration, enable ENTROPY_STM32_RNG
only if device node matching driver compatible is enabled.
No more need to enable config symbol under soc/
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Convert stm32 entropy driver to configuration based on device tree.
Select HAS_DTS_ENTROPY symbols and configure CONFIG_ENTROPY_NAME
in fixup files.
Since rng node is not enabled (or available) on all boards, it could
happen that symbol ENTROPY_STM32_RNG is not enabled and hence
ENTROPY_HAS_DRIVER not selected which ends up with a symbol
ENTROPY_NAME defined throufg Kconfig selection. Thus, in fixup file,
CONFIG_ENTROPY_NAME is defined only if not already defined.
Additionally, update boards that used to configure entropy by default.
On these boards, enable rng device in device tree and remove Kconfig
related configuration (which should not be part of default
configuration).
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Instead of using Kconfig options for setting the device name and IRQ
priority for the entropy_nrf5 driver, get these settings from the rng
node defined in DTS for a given SoC.
Provide also fixups for CONFIG_ENTROPY_NAME, until applications using
entropy drivers are converted to use DTS as well.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Move towards use DTS for driver instance name instead of Kconfig sybmol.
This is towards phasing out CONFIG_ENTROPY_NAME.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a YAML, DTS node and driver support to utilize data from devicetree
for register address and driver name.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Convert older DT_INST_ macro use in litex drivers to the new
include/devicetree.h DT_INST macro APIs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert older DT_INST_ macro use in atmel sam drivers to the new
include/devicetree.h DT_INST macro APIs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert older DT_INST_ macro use in esp32 drivers to the new
include/devicetree.h DT_INST macro APIs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert older DT_INST_ macro use in cc13xx_cc26xx drivers to the new
include/devicetree.h DT_INST macro APIs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add the get_entropy_isr API function for the gecko entropy
driver. When the function is invoked without the ENTROPY_BUSYWAIT
flag, it returns whatever data is available in a non-blocking manner.
Signed-off-by: Pooja Karanjekar <pooja.karanjekar@lemonbeat.com>
Add entropy driver based on GECKO TRNG module along with device
tree support for EFM32PG and EFR32MG SOCs.
Signed-off-by: Pooja Karanjekar <pooja.karanjekar@lemonbeat.com>
This reverts commit 8739517107.
Pull Request #23437 was merged by mistake with an invalid manifest.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Same deal as in commit eddd98f811 ("kconfig: Replace some single-symbol
'if's with 'depends on'"), for the remaining cases outside defconfig
files. See that commit for an explanation.
Will do the defconfigs separately in case there are any complaints
there.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Kconfig.rv32m1 is already 'source'd within an 'if ENTROPY_GENERATOR', so
ENTROPY_RV32M1_TRNG does not need a 'depends on ENTROPY_GENERATOR'.
Flagged by https://github.com/zephyrproject-rtos/ci-tools/pull/128.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Same deal as in commit 677f1e6 ("config: Turn pointless/confusing
'menuconfig's into 'config's"), for a newly-introduced stuff.
Also clean up headers to be consistent with recent cleanups.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This adds PRBS ranom number generator driver for
LiteX SoC builder with its bindings.
Signed-off-by: Pawel Czarnecki <pczarnecki@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Same deal as in commit 677f1e6 ("config: Turn pointless/confusing
'menuconfig's into 'config's"), for a newly introduced symbol.
Also clean up a header to be consistent with recent cleanups.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Don't use use the RV32M1 TRNG as a random source since it can
be quite slow. Instead, use the software implemented xoroshiro
RNG.
Signed-off-by: David Leach <david.leach@nxp.com>
Update calls to nrfx HAL functions to reflect API changes introduced in
nrfx 2.0.0. All these functions are now called with the first parameter
pointing to the structure of registers of the relevant peripheral.
Also a few functions got renamed:
- nrf_gpiote_int_is_enabled to nrf_gpiote_int_enable_check
- nrf_gpiote_event_is_set to nrf_gpiote_event_check
- nrf_rng_event_get to nrf_rng_event_check
- nrf_rng_int_get to nrf_rng_int_enable_check
- nrf_rtc_event_pending to nrf_rtc_event_check
- nrf_rtc_int_is_enabled to nrf_rtc_int_enable_check
- nrf_timer_cc_read to nrf_timer_cc_get
- nrf_timer_cc_write to nrf_timer_cc_set
Default configuration values were removed from nrfx_config files,
so the drivers pwm_nrfx and spi_nrfx_spis no longer can use those.
Function nrfx_pwm_init() now takes one more parameter - context pointer
that is passed to the event handler, not used in the pwm_nrfx driver.
HALs for UART and UARTE now allow configuration of the parity type
and the number of stop bits, for SoCs that provide the corresponding
registers.
Signed-off-by: Karol Lasończyk <karol.lasonczyk@nordicsemi.no>
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Defining a symbol with 'menuconfig' just tells the menuconfig to display
any dependent symbols that immediately follow it in a separate menu.
'menuconfig' has no effect on symbol values.
Making a symbol that doesn't have any dependent symbols after it a
'menuconfig' should be avoided, because then you end up with an empty
menu, which is shown as e.g.
[*] Enable foo ---
This is how it would be shown if there were children but they all
happened to be invisible as well.
With a regular 'config', it turns into
[*] Enable foo
Change all pointless 'menuconfig's to 'config's.
See the section on 'menuconfig' on the Kconfig - Tips and Best Practices
page as well.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Header files of nrfx HALs are not supposed to be included directly
but only with their names prepended with the hal/ directory (so that
an inclusion of an nrfx HAL header clearly differs from an inclusion
of an nrfx driver header).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
These calls are not accessible in CI test, nor do they get built on
common platforms (in at least one case I found a typo which proved the
code was truly unused). These changes are blind, so live in a
separate commit. But the nature of the port is mechanical, all other
syscalls in the system work fine, and any errors should be easily
corrected.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The commit contributes the implementation of
get_entropy_isr API function for the SAM entropy
driver. The implementation is similar to get_entropy,
with the difference that it does not invoke k_yield()
when called with the ENTROPY_BUSYWAIT options flag set.
When the function is invoked without the ENTROPY_BUSYWAIT
flag, it simply returns whatever data is available,
without busy waiting on the RNG herdware.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This driver makes use of the nRF RNG peripheral, so it can be used only
for SoCs that are equipped with one, and not all nRF SoCs are.
The option enabling the driver should then depend on `HAS_HW_NRF_RNG`,
which indicates the presence of this peripheral in a given SoC.
This patch removes also entries disabling this driver in default
configurations for nRF9160 SoC, as these were needed only because
of the invalid dependency of the ENTROPY_NRF5_RNG option.
A minor adjustment of Kconfig files of the nrf52_bsim board was
required as well, so that this board's configuration can properly
handle this corrected dependency.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/__assert.h to sys/__assert.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move ring_buffer.h to sys/ring_buffer.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move entropy.h to drivers/entropy.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move clock_control.h to drivers/clock_control.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move sys_io.h to sys/sys_io.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move atomic.h to sys/atomic.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
An external project extending the Zephyr RTOS and its drivers may have
subsystems that must use its own specific driver(s) when active. One
example is the nRF5x NVMC that must be scheduled in between radio
operations. A subsystem may also be dependent on its own drivers for
security, real-time and/or because of hardware constrains.
In order to not introduce non-Zephyr specific code into the Zephyr tree,
an option is added to disable the in-tree drivers in Zephyr. Because
Kconfig does not support a good way of de-selecting other symbols, a
variable on the form `<DRIVER>_FORCE_ALT` is added as a
dependency for each `<DRIVER>`. For example, the out-of-tree subsystem
will select `FLASH_NRF_FORCE_ALT` to disable the in-tree driver. A
solution for issue #8181 would open up for a more general solution,
however #8181 requires significant effort.
Support for out-of-tree drivers is added to Nordic drivers for
clock_control, entropy and flash.
A generic solution for this is desired. Issue #14527 is tracking that
progress.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Redefining the config will not let another (out-of-source) driver be
chosen instead of the default. The driver is practically forced by the
soc settings. This commit moves default settings from soc/arm/nordic_nrf
into the drivers themselves.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Also remove some duplicated dependencies for the related symbol
ENTROPY_NRF5_RNG.
The redundant ENTROPY_GENERATOR deps. are in files sourced within a
if ENTROPY_GENERATOR
...
endif
block in drivers/entropy/Kconfig.
The redundant ENTROPY_NRF5_RNG deps. are due to redundant 'depends on'
within an 'if' in the same file.
Tip: Jump to symbols with '/' in the menuconfig and press '?' to check
their dependencies. If there are duplicated dependencies, the
'included via ...' path can be handy to discover where they are added.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
Instead of getting the base address from the MCUX headers, use the base
address from the device tree.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Check clock_control_on return value now that it is checking appropriate
bus is used in the request.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add dts binding and info for TRNG device and enable basic support to
get the device name from DTS. We leave for now the base addresses
coming from the MCUX HAL.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add dts binding and info for RNGA device and enable basic support to
get the device name from DTS. We leave for now the base addresses
coming from the MCUX HAL.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we have DTS support for an entropy driver we should get the name
generated from DTS ('label' property on the entropy device node).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit introduces usage of likely()/unlikely() macros in order
to speed up the entropy_get_entropy_isr() API.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The entropy_nrf_get_entropy_isr(), which is specific to this driver,
is in fact equivalent of generic entropy_get_entropy_isr(..., 0).
This commit removes the entropy_nrf_get_entropy_isr() function
and replaces its usage by call to generic entropy API.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit optimizes access to device data using direct reference
instead of relying on the driver_data field in the device structure.
Such approach saves few cycles on time-critical paths.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The old algorithm managing random number pools was inefficient and
prone to race conditions. Moreover, its behaviour was not compatible
with the API (provided buffers were filled from the end, leaving
beggining of the buffer untouched if there was not enough random data).
The new implementation is a bit faster and it is race-free as long as
all callers of the entropy_get_entropy_isr() are executed in
"run-to-completion" mode.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commit changes the argument passed to ISR to the pointer
to device data structure, removing one dereference in the interrupt
handler.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
This commint replaces function names by more accurate ones.
For example, the isr(), was renamed to rng_pool_put(), which
clerarly indicates what this function is doing.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The entropy_nrf5_get_entropy_isr(..., ENTROPY_BUSYWAIT)
unconditionally started and stopped hardware random number generator
disrupting management of random data pools implemented by the driver.
Moreover, simultaneous call to mentioned function from different
priorities led to hangup of lower priority call as hardware was
stopped by higher priority call while the other one waited for data.
This commit solves mentioned problems by moving the responsibility
for stopping hardware to the interrupt handler. As result hardware
is stopped only when there is no blocking calls to the
entropy_nrf5_get_entropy_isr() as well as all random data pools
are full.
This commit also fixes interrupt management in the mentioned
function, as previous implementation unconditionally enabled
interrupt causing problems similar to the described above.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Neither entropy_nrf5_get_entropy_isr() nor isr() protected
access to hardware. As result in some situations a random value
could be "stolen" by a higher priority call interrupting one
of the mentioned functions.
This commit solves this problem by introducing random_byte_get()
which accesses hardware atomically.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The nrf_rng HAL uses barriers on SoCs which need them to ensure
that all register writes will reach the peripheral immediately.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
The nRF5x entropy driver does not depends on SOC_FAMILY_NRF is therefore
visible and selectable non-nRF5x SoCs. Fix that.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Depend on the new SOC_COMPATIBLE_NRF symbol instead of the
SOC_FAMILY_NRF symbol.
This allows the driver to be used from the bsim simulated board
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Missing clear pending RNG_IRQn when generating multiple
random numbers caused CPU to hang at __WFE call in the
loop waiting for new value.
This fixes commit ddb7f88f9e ("drivers: entropy: nrf5: Fix
ENTROPY_BUSYWAIT implementation")
Fixes#9523.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Consistently use
config FOO
bool/int/hex/string "Prompt text"
instead of
config FOO
bool/int/hex/string
prompt "Prompt text"
(...and a bunch of other variations that e.g. swapped the order of the
type and the 'prompt', or put other properties between them).
The shorthand is fully equivalent to using 'prompt'. It saves lines and
avoids tricking people into thinking there is some semantic difference.
Most of the grunt work was done by a modified version of
https://unix.stackexchange.com/questions/26284/how-can-i-use-sed-to-replace-a-multi-line-string/26290#26290, but some
of the rarer variations had to be converted manually.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fixed the ENTROPY_BUSYWAIT implementation from vectoring to
RNG ISR which was preventing the busywait loop to hang
waiting on the VALRDY event which was getting cleared in the
ISR.
Fixes#9356.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
A few function prototypes were missing in the native_posix
board and its drivers.
Let's add them.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
For each driver/model with command line options.
Move its code for the board file into the driver/model file.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
All the STM32F7 SoCs have a TRNG. Adding support for it is just a matter
of tweaking the #ifdef and including the right file from HAL.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though, and is
inconsistent.
This will make the auto-generated Kconfig documentation have "No
defaults. Implicitly defaults to n." as well, which is clearer than
'default n if ...'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
For the native_posix board, implement the new get_entropy_isr call.
The old native get_entropy was already safe for ISRs, so we just
add a wrapper to it.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
To enable for easier testing, replace direct use of registers
from Nordic's nrfx MDK with accesses via its HAL inlined functions
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Implement the new entropy_get_entropy_isr() function to allow the kernel
to collect entropy before the scheduler and kernel data structures are
ready. Switch to an nrf-specific version for high-performance
requirements in the BLE Link Layer.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
To ensure that early code that requires entropy has the HWRNG devices
fully initialized, initialize them all during PRE_KERNEL_1 stage.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The various macros to do checks in system call handlers all
implictly would generate a kernel oops if a check failed.
This is undesirable for a few reasons:
* System call handlers that acquire resources in the handler
have no good recourse for cleanup if a check fails.
* In some cases we may want to propagate a return value back
to the caller instead of just killing the calling thread,
even though the base API doesn't do these checks.
These macros now all return a value, if nonzero is returned
the check failed. K_OOPS() now wraps these calls to generate
a kernel oops.
At the moment, the policy for all APIs has not changed. They
still all oops upon a failed check/
The macros now use the Z_ notation for private APIs.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Be more obvious about the entropy_native_posix driver
being only a test utility which does not generate real
entropy.
Fixes: #6388
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
