Adds release notes about the addition of a socs folder for
applications to store Kconfig fragments and devicetree overlays
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Adds details about Kconfig fragments and devicetree overlay files
that will be included in a build if they are found in the
``socs`` folder
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Add a diagram that was first created for eoss 2024 to help
visualize the relation between the different application
environment profiles of IEEE 1003.13-2003.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The POSIX Application Environment Profiles are additive and
offer incrementally more features over the System Interfaces.
For example, PSE51 includes all of the features of the Minimal
Realtime System Profile plus all of the System Interfaces.
PSE52 includes all of the features of the Realtime Controller
System Profile, plus the features of PSE51, plus the System
Interfaces, and so on.
It makes sense to take advantage of that and to condense the
AEP documenation.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Define additional options and option groups for PSE51 to PSE53.
The options groups added in this commit are:
POSIX_SIGNAL_JUMP
POSIX_FILE_SYSTEM
POSIX_PIPE
POSIX_FILE_LOCKING
The options added in this commit are:
_POSIX_MEMLOCK
_POSIX_MEMLOCK_RANGE
_POSIX_MONOTONIC_CLOCK
_POSIX_SHARED_MEMORY_OBJECTS
_POSIX_THREAD_CPUTIME
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Previously, some links were not resolving properly since they
lacked the :ref: prefix, so it was added.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Mark the _POSIX_ASYNCHRONOUS_IO headers as supported, and note
the deviation that they return -1 and set errno to ENOTSUP.
At some later date, it might be possible to implement the
standard functions with other Zephyr API calls.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
In most cases these were defined as 1. Saving one byte for the rest
doesn't really justify the added complexity that comes with these
options. Removing them also simplifies the interface between HCI
transports/drivers and the host stack, which in turn helps pave the way
for having HCI as a proper Zephyr driver API.
Fixes#71907
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Instead of chapters, make device runtime power management and
system-managed device power management sections.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
There is a whole section dedicated to power domains. The brief
information in device power management was not adding anything.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Rename the Kconfig symbol for all ITE SoC variants.
Rename the SOC_SERITES_ITE_IT8XXX2 to SOC_SERIES_IT8XXX2.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
This enhances the description of i.MX8MPlus SoC with the Cadence HIFI4
core and thus will make this example more relevant to the benefits of
HWMv2.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
LinkServer does not set a breakpoint at reset by default when debugging
platforms, so if the user single steps after loading an application they
will likely step through ROM code for the target. Add a note clarifying
that users need to set a breakpoint at the reset handler or "main" in
order to pause their application there.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
As of now only the resume action is supported, and doesn't perform
any power action on the GNSS modem.
It allows to initialize the GNSS driver later than it would otherwise
be.
Also, the driver now runs a modem-specific chat script on resumption.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
The adc sample was in the root directory of the adc samples.
Move all the files to a subdirectory adc_dt.
Signed-off-by: Paulo Santos <pauloroberto.santos@edge.ufal.br>
Major development work is concluded for Twister tests.
We should release appropriate information.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This will allow expansion of various ZTEST macros to display the actual
test function rather than the ZTEST macro itself.
Inspired by a change in #71402 by @gmarull.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Deprecate the advertiser options `BT_LE_ADV_OPT_USE_NAME` and
`BT_LE_ADV_OPT_FORCE_NAME_IN_AD`.
Reasons:
- It is out of place in the advertiser options, as it acts on
advertising data and not configuration
- The behavior is not clear. All of these are trick questions:
- where does the data for the name go?
- do I have to allocate memory for this?
- does it work the same in legacy vs extended advertising?
- The trade-off between UX improvement and extra complexity in the host
is debatable. Hundreds of lines in the stack to avoid making the user
type out less than ten.
Also deprecate the following macros that uses those options:
- `BT_LE_ADV_CONN_NAME`
- `BT_LE_ADV_CONN_NAME_AD`
- `BT_LE_ADV_NCONN_NAME`
- `BT_LE_EXT_ADV_CONN_NAME`
- `BT_LE_EXT_ADV_SCAN_NAME`
- `BT_LE_EXT_ADV_NCONN_NAME`
- `BT_LE_EXT_ADV_CODED_NCONN_NAME`
Update the migration guide and the release note for Zephyr 3.7 to
describe those changes.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The advertiser options to automatically add the name in the scan
response and the advertising data will be deprecated.
Update the Bluetooth shell and its documentation to not use those
options anymore.
The option of the legacy advertiser run with `bt advertise` and the
behavior hasn't changed. The code has been updated to no longer use the
advertiser option but the original behavior has been reproduced.
The option of the extended advertiser have been updated to be more
explicit. The options `name` and `name-ad` have been removed from the
`bt adv-create` and `bt adv-param`. The option `name` and `dev-name`
have been added to the `bt adv-data` command.
- `name <str>` will advertise the given name.
- `dev-name` will advertise the device name.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Adds some documentation about the Xtensa HiFi AudioEngine DSP and
how to enable its use with Zephyr.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Add POSIX FD_MGMT option and mark ftruncate as supported
in POSIX Option group Documentation
Signed-off-by: Karthikeyan Krishnasamy <karthikeyan@linumiz.com>
Deprecate ETH_MCUX, by:
- Marking it as DEPRECATED in Kconfig, obviously.
- Unmarking the new driver as experimental.
- Putting the new and old drivers in the same folder.
- Reworking the menu appearance of the driver selection.
Note that technically now it is possible to choose the wrong
driver than what is enabled in DT, this is intentional, but
the correct one will obviously be enabled by default.
- Convert all sample overlays to the new Kconfigs. This was
part of the motivation for the shared overlays, as it was
causing twister/CI logs to look ugly and misleading due
to Kconfig warnings.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Added a newline to display the list correctly
The list is displayed like:
MIPI DBI defines 3 interface types: * Type A: Motorola 6800 parallel bus
* Type B: Intel 8080 parallel bus
But it should be like:
MIPI DBI defines 3 interface types:
* Type A: Motorola 6800 parallel bus
* Type B: Intel 8080 parallel bus
This was fixed by an example from another doc:
doc/hardware/peripherals/i3c.rst
Signed-off-by: Dmytro Yaskov <dmytro.v.yaskov@gmail.com>
The current diagram uses a custom font that does not render correctly on
some browsers. Replace it with a common font (Courier New) instead so
that there are no rendering issues.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Minor update to existing zspdx implementation to add support for
PrimaryPackagePurpose introduced in SPDX 2.3.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
LE Audio sticks out in a few ways that's worth knowing
not only as a contributor, but also as an application
developer. These things have been documented, and may be
expanded upon later.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modifies the audio configuration (ac) commands for CAP
and GMAP to use the default presets instead of supplying
the preset as arguments. This will allow the user to
use the `bap preset` command to configure everything in the
codec configuration before the AC commands are issued.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add notes on how the LE Audio stack is designed and why data is
sometimes placed and controlled by the stack or the application.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
