zephyr

History

Rubin Gerritsen f086afd47c samples: Bluetooth: Only connect to devices with rssi below -50 When the Bluetooth central samples in an open air environment it is very likely that there are multiple devices nearby with a received signal strength stronger than -70 dBm. To avoid connecting to the wrong device, make the check stricter. For tests using those samples, the NtNcable attenuation is changed from the default 60 dBm to 40 dBm to satisfy the new requirement. Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>		2024-02-26 14:34:07 +01:00
..
src	samples: Bluetooth: Only connect to devices with rssi below -50	2024-02-26 14:34:07 +01:00
CMakeLists.txt	samples: Bluetooth: peripheral and central GATT write command use	2022-06-22 12:22:29 +02:00
prj.conf	Bluetooth: Samples: Remove usage of `BT_DEBUG_LOG`	2023-06-07 13:56:55 -04:00
README.rst	samples: Bluetooth: peripheral and central GATT write command use	2022-06-22 12:22:29 +02:00
sample.yaml	samples, tests: convert string-based twister lists to YAML lists	2023-05-10 09:52:37 +02:00

README.rst

.. _bluetooth_central_gatt_write:

Bluetooth: Central / GATT Write
###############################

Overview
********

Similar to the :ref:`Central <bluetooth_central>` sample, except that this
application use GATT Write Without Response.

Requirements
************

* BlueZ running on the host, or
* A board with BLE support

Building and Running
********************

This sample can be found under :zephyr_file:`samples/bluetooth/central_gatt_write`
in the Zephyr tree.

See :ref:`bluetooth samples section <bluetooth-samples>` for details.